Top Angle Measurement Tool For Woodworking

Bosch GTL3 65ft Square Laser Level for Tile and Square Layout

  • MULTI-FUNCTION: MUSIBO woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work. Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. MUSIBO woodworking protractors & ruler is an indispensable tool for every woodworkers and mechanics.
  • HIGH PRECISION: The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
  • Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 13in, and the smallest scale is accurate to 1/32in. There are 104 serrated notches and 13 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • SIMPLE OPERATION: You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Adjust the nut to get the best feel. Place the tip of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can ....
Check Stock

ZX-1 Center Scriber Woodworking Scriber Center Line Marking Tool Easy to Find the Exact Center and Offset Lines Red

  • 【Material】This measuring tool is made of high-quality aluminum alloy material, with high hardness, wear resistance and durability. And it is small....
  • 【Good for Woodworing】The center finder scribe woodworking accessory is a perfect woodworking marking tool that can be firmly fixed on the wooden....
  • 【Small】Simple and fast, and it can mark soft metals and woods, which is very suitable for finding the precise center. Can be widely used in....
  • 【Use Range】The length Approx 120mm, and the center point can be found accurately under the length of 95mm..
  • 【Excellent Masurement】Accurate scale, accurate angle measurement. It is very suitable for woodworkers to find the precise center at work, improve....
Check Stock

Woodworking Tools Ruler,Sinyaung 6/8/12 Inch Pocket Ruler Accessories T-Track Metal Ruler Carpenters Layout Tool Aluminum Alloy for Thickness Planer Hand Tools Precision Ruler Stop Fence Dual Units

  • ...ers fit your different manual needs in your daily work..
  • 【IMPROVED T-SHAPE RULER】Long lifespan, saving resources. High-tech materials and durable manufacturing present a perfect product to you. Compared to a traditional T-ruler, our carpentry tool has adjustable positioning lock. Adjust the block as required for measurement. Control the thumb screws on the lock, you can secure or move it easily. Accurate positioning brings you precise measurement, no-worry about measuring error..
  • 【INCH and MM MEASUREMENT】Scribing tool for woodworking. Dual functions of inches and millimeter permit you to identify required measurement unit immediately since there are measuring scales on both sides. Perfect helper as an angle grinder attachments. Easy to convert units, and do not waste time. Take it in your pocket, and you can measure it whenever and wherever you want..
  • 【YOU CAN GET】3-Pack 6/8/12in carpenter tools in secure packaging, accurate measurement, and the most important, our warm and faithful service. Distinctive tool ruler, suitable for all kinds of people, including children. Applicable to many occasions, tailor shop, handcraft, blacksmith shop, wood factory and so on. If you have any question, please contact us..
Check Stock

10 Inch Super Gauge Shape and Outline Tool, Contour Gauge Profile Tool with Lock, Measuring Tools Shape Duplicator Woodworking Tools

  • ...lastic, would not scratch the surface of the object being duplicated. Unlike metal contour gauge, the contour gauge with lock is waterproof and rustproof. With high strength and durable material, our contour gage would be the great useful cool gadgets for men..
  • [Both Sides Measurements and Dual Scales]: The profile gauge tool has INCH&CM scales on both sides, makes it easier to measure and record numbers. With this contour tool, no more guess work! You will get a precise measurement or duplication by using this measuring tool no matter normal shapes or odd shapes..
Check Stock

Woodworking Marking Gauge Mortise Gauge Ruler Double Head Aluminium Alloy Carpenter Tool Mortise Gauge Scriber Ruler

  • 【Anti‑Slip】The marking gauge tool has anti‑slip teeth, and it is anti‑slip hands, beautiful and comfortable, easy to use.
  • 【Material】The wood marking gauge main body is made of aluminum alloy with rounded corners, which makes it easy to grasp.
  • 【High Efficiency】The mortise gauge scriber ruler is very simple to use, good performance and high efficiency. Accurate marking, a good helper for woodworkers.
  • 【Clear Angle】Acrylic solid acrylic shock‑proof level bubble, the inner wall automatically prints 2 types bubbles (measure the level, measure the 45° angle), the horizontal direction is clear at a glance, fine workmanship, practical.
  • 【Reliable Measurement】The woodworking mortise ruler fits the steel ruler scale used in daily use, 145mm effective scale, reliable measurement.
Check Stock

MUSIBO Protractor Angle Finder, Woodworkers Edge Ruler, T Square, T Ruler, Straight Edge inch Ruler,Multi-Function Angle Measure Tool Woodworking Metal Ruler Kit with Wall Hanging Storage Rack(13in)

  • MULTI-FUNCTION: MUSIBO woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work. Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. MUSIBO woodworking protractors & ruler is an indispensable tool for every woodworkers and mechanics.
  • HIGH PRECISION: The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
  • Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 13in, and the smallest scale is accurate to 1/32in. There are 104 serrated notches and 13 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • SIMPLE OPERATION: You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Adjust the nut to get the best feel. Place the tip of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can ....
Check Stock

Digital Angle Finder Protractor,2 in 1 Auzof Angle Finder Ruler,7Inch / 200mm Stainless Steel Angle Measuring Tool with LCD Display for Woodworking/Carpenter(2 Batteries Included)

  • 【2 in 1 Digital Angle Finder】：Auzof protractor has the function of a 200mm/7.874in Stainless Steel ruler and a protracting tool. The combination of a millimeter and inch scale ruler and a protractor makes it easy to measure internal/external angles and fast measurements Length . Suitable for woodworking, construction, drafting and other fields..
  • 【High durability and precision】:This digital protractor is made of corrosion-resistant stainless steel straightedge, laser scale straightedge measurement error 1mm, Measuring Range: 0-360°.
  • 【Lock, Zero, Hold and Degree conversion Functions】This protractor can be locked at any angle by rotating the Locking Knob and pressing the HOLD function button will hold the reading.Long press on the "Rev" button, the display can be converted ° and ′. Zero button can reset the angle measuring tool at any time..
  • 【Large LCD Display &2 Batteries Included 】 Auzof digital protractor is equipped with a large LCD display for easy reading Resolution 0.1° Clear readings even in low light conditions,Also It comes with a CR2032 button battery inside, you can use it directly when you receive it. We also give you a additional battery as a spare..
Check Stock

90 Degree Positioning Squares，4Pcs 7.1 inch Right Angle Clamp， L-Type Aluminium Alloy Corner Clamp Woodworking Carpenter Clamping Tool for Picture Frame Box Cabinets Drawers

  • ... kit is processed by aluminum alloy and stainless steel, surface anodized reatment,Corrosion resistant,not easy to fade,and extremely fine workmanship.the service life will last for years..
  • 【Unique Design】: The right angle clips are L-shaped design, laser engraved, they are located on the front and back for easy measurement, accurate and easy to read. There are two types of scales, the 7.1" scale and the 180mm scale. There are 6 holes on both sides of the right-angle clamp, and the clamping force is stronger..
  • 【Widely used in woodworking】The advantage of 7.1 inches over 5.5 is that it is not only suitable for small size assembly, but also suitable for various large-scale professional jobs.This right angle jig set designed to be clamped to boxes, picture frames, drawers,frames, shelf cabinets, 90 degree weld and for outside corners. This is the best choice for woodworking..
  • 【Easy To Use】Woodworking carpenter clamping tool put the square on the corner of the two raw materials that need to be flattened and fixed with a set of clamps.Perfect 90° Corners, easy to handle and will not damage the fragile cutting edges, just place a square on the corner of the two stock pieces to square and secure with a set of clamps..
Check Stock

General Tools Digital Angle Finder Ruler #822 - 5\ Stainless Steel Woodworking Protractor Tool with Large LCD Display

  • 【High Accuracy 】This digital angle finder allows a full range 0-360° to measure internal angle，external angle & Contra angle Measuring precision is ±0.5°, resolution is 0.05° .You can switch between degrees and minutes to Improve the measurement accuracy , meet your requirements for different accuracy..
  • 【Multi-functional Angle Finder 】This protractor combine a angle finder, ruler(7 inch/190mm) and level tools( 3 bubble, Horizontal, Vertical & Circular Level), get one and can instead of 4 pcs single function tools, make it become a helpful woodworking tools and equipment in daily use, expecially you are tire of a bulk of tools in your toolbox.
  • 【Data Hold】Pressing hold button to hold the measurement at any angle, it helps the users effectively record the angle values. Lock angle feature helps maintain accuracy ideal for use in woodworking, construction, or drawing..
  • 【Durable Battery】Super endurance enables it to work continuously more than 2000 hours. Digital angle Finder automatic power-off function, save power consumption and extend battery life. Protractor is equipped with a large LED for easy reading..
  • 【Our Service 】Our worry-free 18-month warranty, and friendly customer service . So you can rest assured. There’s no worry to....
Check Stock

2-in-1 Mitre Measuring Cutting Tool, Measuring and Sawing Mitre Angles Cutting Tool for Home Improvement, Carpentry Work, Miter Saw Protractor Tool Professional woodworking tools

  • ▶ High Quality Material: ABS+PC+Stainless Steel. Will lasts for years. Resistant to corrosion..
  • ▶ 2-in-1 Tool For Efficiency: Both the miter angle can be measured and the cut completed, eliminating the need to use multiple tools and avoiding errors when transferring the correct angle to the saw..
  • ▶ Accurate Measurement: 2 moving arms for measuring angles from 85 to 180° can be used directly to measure all angles within this range..
  • ▶ Precise Sawing: With the integrated guide pin for the saw, the baseboard is placed on the provided guide plate and the sawing is carried out using the back saw for precise and error-free miter cutting..
  • ▶ Practical Measuring + Cutting Tool: This tool is used to solve the problem of cutting corners in skirtings or recesses where special measuring tools are required, for pipeline installation, home improvement, carpentry work. Practical tool to make your woodworking project easier..
Check Stock

Multi angle measuring ruler,universal multi-angle measuring ruler 12 side hole positioning aluminum alloy multi angle measuring ruler template tool multi-angle measuring ruler with drilling locator

  • ...lity materials】The multi angle measuring ruler made of high quality aluminum alloy material, anti-fall, durable. the aluminum alloy multi angle measuring rule is super wear-resistant, can be used for a long time, no need to worry about corrosion, to ensure the durability of multi angle measuring rule..
  • 【Accurate measurement】The multi angle measuring ruler, high accuracy, can be accurate to the mm value, clear reading, The multi angle measuring ruler units: CM and inches not easy to paint, easy to maintain and easy to store, The multi angle measuring ruler is a precise multi angle measuring ruler template tool.
  • 【Powerful】The multi angle measuring ruler Can be freely deformed and used in various ways.the multi angle measuring ruler has a 12-piece ruler and 12 metal knobs that fold freely. Simply adjust the metal knobs to precisely create the shape you want. Measuring objects of different shapes is quick and easy..
  • 【easy to carry】This multi angle measuring ruler 12 side，universal opening locator，Interlinked, easy to carry，Not easy to lose。The universal opening locator has three sizes of openings with diameters of 45mm, 25mm, and 40mm.They are linked together，Prevent you from losing one of them at work.
Check Stock

SCKUBMF Multi Angle Measuring Ruler Universal Multi Angle Measuring Ruler 12 Section Ceramic Tile Opening Locator Aluminum Alloy Multi Angle Measuring Ruler

  • This multi angle measuring ruler is made of high-quality aluminum alloy, which is not easy to bend or rust, fall and durable. More durable and....
  • With 12 rulers, this multi angle measuring ruler can accurately create the required shape, and then find the correct drilling position. By folding 12....
  • Small size and easy to carry, measurement is very convenient, just fold it and put it in the bag..
  • The tool is made of high quality aluminum alloy, which is durable and can stand the test of time. This tool can stand wear and tear. Laser solid....
  • It is very suitable for woodworking, brick, ceramic tile, wood, glass, stone, laminate, construction and engineering projects! It can also replace....
Check Stock