Top Angle seat Valve

6-Pack Valve Stem Extenders, Mellbree 45 Degree 90 Degree 135 Degree Schrader Tire Valve Extension Compatible for Dual Wheels Passenger Cars, RV, Stroller, Bicycles, Motorcycles and Trailers

  • Three kinds of valve stem extension（45 degree, 90 degree and 135 degree）successfully solved a series of operations such as inability to pump or check air pressure due to insufficient space between the valve and the spokes, or the inconvenient position and angle of the valve. Due to the built-in valve core, they can allow inflation and deflation, which is convenient and quick. Be sure to tighten the thread when using it, otherwise the best sealing effect cannot be achieved..
  • The tire valve extension joint is made of brass, the surface is chrome-plated, the chrome-plated layer has higher hardness, better heat resistance, and is not easy to rust. Equipped with rubber sealing ring and sealing cover, durable. The bottom of the extension piece rotates freely, which is easy to operate, convenient and efficient..
  • Prevent air leakage! 1. Install the valve angle extension on the valve core, and be sure to tighten the thread of the rotating part so that there is no air leakage. 2. When you are adjusting the angle, you rotate the valve extension. After the angle adjustment is over, you must tighten the rotating thread to the maximum. 3. The threaded head on the valve extenders is screwed on the existing valve stem, and the included end cap replaces the existin....
Check Stock

A-Team Performance - Angle Plug Aluminum Cylinder Heads 64cc Chamber 205cc Intake Ports 2.020 Intake Valve 1.600 Exhaust Valve - Compatible with SBC 283 302 305 327 350 383 and 400 to 1986 Set of 2

  • Angle Plug Aluminum Cylinder Heads 64cc Chamber 205cc Intake Ports 2.020 Intake Valve 1.600 Exhaust Valve.
  • Compatible with SBC 283 302 305 327 350 383 and 400 to 1986 Set of 2.
  • These Bare Aluminum SBC heads have a 205cc Runner with 64cc combustion chambers with heart-shaped chambers..
  • Intake Valve Diameter: 2.020″ (up to 2.050 with machining, we do not offer this service).
  • Head also features a deck thickness of .625. Spring seats are cut to 1.550 diameters.
Check Stock

RO6G Replacement Seats and Springs for Delta Faucet RP4993-10Pk

  • Rich in quantity: you will get 10 pieces RP4993 replacement seats, 10 pieces springs, 20 pieces O rings in 2 sizes, all these applicable for the replacement of RP4993, enough quantity can meet your daily usage and replacement.
  • Reliable and quality: featuring rubber and stainless steel, these RP4993 seats and springs are sturdy and strong, no rust, not easy to break and wear, can serve you for a long time.
  • Repair faucet leakage: these faucet stem replacement parts can repair faucet leakage caused by valve stem or spring and valve seat failure.
  • Adequate accessories can meet your multiple needs and improve your quality of life.
  • Easy installation: simple to use and install, firstly close the water valve, then remove the valve stem of the faucet, replace the valve seat, spring or rubber ring, then install the valve stem, and finally tighten the faucet.
  • Multiple occasions: this faucet stem O ring can be widely applied in kitchens, bathrooms, toilets, bathtubs, shopping malls and so on, can repair diverse kinds of single-handle faucets.
Check Stock

Mallofusa 5 Gallon Air Tire Bead Seater Blaster Tool Seating Tire Inflator Car Truck ATV Tank Heavy Duty US Stock

  • QUICK/ EASY: quickly inflates tire sidewall to seat the bead onto wheel rim for all tires up to 24.5inchs, including regular vehicles, trucks,....
  • DURABILITY: heavy duty all steel construction tank with powder coating finish.
  • EASY TO READ GAUGE: accurately fill the tank from standard shop compressor at recommended operating pressure of 87-120 PSI with the included....
  • AUTOMATIC SAFETY VALVE: safety valve automatically pops off and releases air beyond operating pressure for added security.
  • LONG REACH: metal barrel with a specially designed lip delivers a quick air blast between tire and rim at perfect angle and position to get the job....
Check Stock

Eastman Quarter-Turn Brass Angle Stop Valve, 1/2 inch FIP x 3/8 inch OD Comp, Chrome, 10733LF

  • ✅DESIGN- Forged brass construction which provides strength and durability eliminating leaks. The chrome-plated finish gives it a modern look..
  • ✅QUALITY- The Teflon seats of the valve resist corrosion and provide a watertight seal. Chrome-plated finish resists corrosion..
  • ✅EASY TO USE- Brass ball mechanism provides ease of operation. It has a removable oval handle which provides easy grip..
  • ✅FUNCTIONALITY-With 1/4 turn, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home..
  • ✅MEASUREMENT- Professional Series Quarter-Turn Angle Stop Valve has a 1/2-inch Iron Pipe Inlet (FIP) x 3/8-inch OD Compression Outlet..
Check Stock

Levemolo 1 Set Racing Gaming Chair Gaming Chair Adjustable Armrest 180 Degree Seat Angle Adjustment Racing Chair Angel Adjuster Regulator Accessories Racing Chair Angel Adjuster Makeup

  • Racing Seat Angle Adjuster: Multi-Angle Adjuster Adjustable Mounting Practical Replacement for Office Chair Gaming Seat：The rear angle adjuster is made of material, which is durable and practical..
  • Seat Back Angle Adjuster: Multi-Angle Adjuster Adjustable Mounting Practical Replacement for Office Chair Gaming Seat：Lightweight, reliable, and product. Improves mobility and stability..
  • Seat Angle Adjustment: COMPUTER CHAIR ANGLE ADJUSTER New adjustable front control arm make operation more convenient..
  • Racing Seat Angle Adjuster: GAMING CHAIR REPLACEMENT PARTS Seat Back Angle Adjuster Swivel Chair Accessories 180 Degree Adjustable for Racing chair.
  • Seat Angle Adjustment: Multi-Angle Adjuster Adjustable Mounting Practical Replacement for Office Chair Gaming Seat：Adjustable handle front control arm makes operation more convenient..
Check Stock

Bidet T Adapter with Shut off Valve,Metal T Valve for Bidet 7/8” X 7/8” X 1/2”or 3/8”,Tee Connector Bidet Attachment for Toilet

  • T-valve adapter is made of high-quality solid brass and the surface is chrome-plated, which is beautiful and durable, and can be used for a long time..
  • Brass Shut-off T-adapter for bidet is designed to be controlled by a single lever, and the switch can be completed by rotating a 90-degree angle, and the water pressure and switch can be easily controlled.
  • The thread of the bidet shut off valve is 7/8"X7/8"X1/2".the 7/8" male thread is used to connect the water supply hose, the 7/8 " female thread is used to connect to the toilet tank, and the 1/2" thread is used to connect the handheld Spray hose, or connection 1/2" X 3/8" adapter for 3/8” bidet toilet seat attachment connection..
  • Note: The T-valve is only suitable for toilets and cannot be connected to showers or faucets.
  • Used to turn off the water flow when not in use and adjust the water flow to your needs. turning off the switch will not affect the water flow of the toilet tank. The valve only controls the water flow of the hand-held sprayer..
Check Stock

YUHX Lead Free Brass Angle Stop Add-A-Tee Valve, Bidet 3/8 x 3/8 x 3/8 Inch Compression or 1/2 T Adapter for One-Piece Skirted Toilet , 3/8' Compression Outlet Easy Connect 3 Way Diverter

  • 1 ★【 Connect Multiple Items 】 Used for adding an outlet on existing 3/8 compression angle stop valve to supply water for faucet , dishwasher , glass rinser , bidets et.
  • Suitable for both cold and hot water systems.
  • 2 ★【 Heath and environment friendly material 】Lead free brass , chrome-plated tee valve for both potable and non-potable water . For adding an outlet on a angle stop valve for a bidet , water filtration system, dishwasher, second faucet, etc.Used for adding an outlet , Install on angle stop valve.
  • 3 ★【 Ideal 3/8 water line splitter 】1/4 turn tee stop valve,so you can freely control on-off of the branch waterway and adjust water flow size to suit your needs.
  • 4 ★【Outstanding performance】Built-in rubber ring for better sealing . It's the perfect alternative for people who have a one piece toilet where access to the 7/8 water tank valve is not possible or too cramped to reach.
  • This T-Adapter can be installed on a 3/8" OD compression threaded water supply to divert to your bidet and toilet fill valve.
  • 5 ★【 T-valve size 】3/8" OD female compression x 3/8" OD compression x 3/8" OD compression or 1/2 thread ,the 3/8 t adapter has 3 outlets , which can be used as one water inlet , two water outlets.
Check Stock

Furgle Gaming Chair Racing Style High-Back Ergonomic Chair Load Bearing 400LBS Roulette Foldable with 3D Adjustable Armrests Office Computer Chair Rocking Mode Classic Black

  • 【Racing Style】ACE series gaming chairs have the appearance of racing seats and the wrapping feeling of massage seats. Based on the four....
  • 【Load bearing 400LBS】Computer chair equipped with 4-stage hydraulic piston and 5-star foldable base, with sensitive control valve, bringing you....
  • 【High quality build】The whole chair is made of breathable and wear-resistant leather and resiliency latex with a strong sense of wrapping. In....
  • 【Size data】Backrest size: 33"x 19"(L x W), seat size: 23"x 21"(L x W).
  • Backrest with lockable reclining angle 90-160° adjustable.
  • 【Worry-Free Purchase】A detailed instruction will be sent to you along with all accessories so that you can assemble the chair easily. Provides you....
Check Stock

OEMTOOLS 24449 5 Gallon Tire Bead Seater Seat Beads for Automotive and Off Road Tires Max 150 PSI Compatible with Standard Shop Air Compressors

  • THE LIP SEALER: Get it sealed right on the first try.
  • The lip on the barrel guides the tire blast tank to the perfect 40 degree angle for easy tire....
  • FOR TIRES BIG AND SMALL: This tire blaster seats tires as small as 4 inches and as large as 24-1/2 inches.
  • Get things rolling again for cars, trucks,....
  • DON'T TIRE YOURSELF OUT: This bead blaster is faster, easier, and safer than other ways to seat tires that use straps or fire.
  • PERFORMANCE UNDER PRESSURE: Fill this tire bead setter up to a maximum of 150 PSI with a standard shop air compressor.
  • PORTABLE POWER: Connect a dual chuck to the ball valve to turn this bead seating tool into a portable tire inflator.
Check Stock

DNA Motoring CYLH-MIT-4D56-ASSE 4D56/4D56T Engine OE Style Aluminum Complete Cylinder Head

  • This listing is for a pair of Brand New Dodge 5.2 / 5.9 MAGNUM cylinder heads.
  • Highest grade of material used in manufacturing.
  • Thicker decks for greater strength & superior port finish for increased flow.
  • Improved flow design to resist cracking & redesigned water flow.
  • CNC machined guides and seats with a 3 angle valve finish.
Check Stock

Febco 3/4 in Bronze Double Check Valve Assembly-3/4 850

  • This 3/4 in. double check valve assembly is designed to prevent the backflow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure in accordance with national plumbing codes and water authority requirements..
  • Its compact modular design facilitates easy maintenance with a single access cover for in-line repairs..
  • The FEBCO Series 850 Double Check Valve Assemblies are designed for non-health hazard applications..
  • This assembly consists of a bronze body construction, NPT end connections, quarter turn ball valve shutoffs, top mounted test cocks, 2 in-line independent positive seating check modules, captured springs, and replaceable check discs and seats..
  • Bronze body for durability, Modular compact design, Replaceable seats and seat discs, Top entry.
Check Stock