Top Ansi B16 9 Fittings

3/4 Inch Tee Fitting Compression Tee Fittings for 3/4 Inch Tubing System (2 pcs)

  • 【Lead Free Material】PPSU is a durable plastic poly material, lead free and non-toxic. So PPSU is more eco-friendly than brass. These pex expansion fittings meet the standard of potable water grade. When the water flows through the poly pex fittings, it will not be polluted..
  • 【Fully Equipped】Qty: 1/2 inch pex expansion elbows 10pcs + 1/2 inch pex expansion Tees 10pcs + 1/2 inch pex expansion couplings 10pcs + 1/2 inch pex expansion rings 70pcs | Connection pipe type: Pex A pipe only | Max temperature: 200F | Max operating pressure: 160psi.
  • 【Professional Standards】Pex Expansion A Fittings are of high quality. All poly pex a fittings are manufactured according to ASTM F-1960, CSA B137.5 and qualified cUPC certification. Listed to NSF NSF/ANSI 61..
  • 【Easy to Install】Use expansion tools and expansion rings to connect the expansion fittings to the PEX A pipe. The protruding stop part on the expansion pex fitting makes it clear whether it has been installed in place. NOTE: Expansion tool is not included in the package..
  • 【Wide Usage】Plastic poly pex expansion fittings can be widely used in heating circulation system and domestic water. Due to its good corrosion resistance and heat resistance, it can have excellent performance even in a chemica....
Check Stock

Brass Pipe Fitting Coupling-1/2 x 1/2 NPT Female Chrome Plated Finish Brass Pipe Fitting Coupler with 1 Roll Copper Joint Thread Sealing Tape for Home Plumbing Pipes 1pcs-Chrome Plated

  • 【MATERIAL】Our brass pipe fitting coupling is made of premium solid brass with chrome plated finish.chrome plated brass for corrosion resistance,....
  • 【APPLICATION】Our brass pipe fitting coupling can apply to water, oil and fuel, LP and natural gas, and be used to connect various pipes as well as....
  • 【STANDARD】Our brass pipe fitting coupling meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance..
  • 【FUNCTION】1/2" female x 1/2" female NPT threads equal diameter hex nipple for connecting two female threaded pipes with same diameters. Or....
  • 【SERVICE】Our QC department do 100% quality inspection on the brass pipe fitting coupling before delivery. We will do 100% refund if brass pipe....
Check Stock

John Guest - PI1216S Acetal Copolymer Tube Fitting Bulkhead Union 1/2 Tube OD Pack of 5

  • Reducing branch tee for connecting three pipes or fittings with different diameters in a main/branch configuration.
  • Accepts nylon and polyurethane tube fittings.
  • Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength.
  • Meets NSF/ANSI standards 14, 51, and 61 for quality assurance.
Check Stock

Class A Customs | RV Fresh and Gray Water Tank | Combo Pack (20 Gallon & 25 Gallon) | RV Water Holding Tanks

  • NSF Certified MATERIALS used for manufacturing process — ALL PARTS of tank made with NSF International NSF/ANSI Std 61 approved Medium Density Polyethylene (MDPE) Resin with UV-8 stabilization — The tank and fittings are both made out of this material..
  • These 20 and 25 gallon tanks each have two 1/2″ female NPT fittings (fitting will be closed, to use remove inner membrane with razor knife) and two 1 1/2″ female NPT fittings (fitting is not closed, this fitting is completely open).
  • 20 Gallon Tank measurements – 32 1/2″ x 11 3/4″ x 11 3/4″ (+/-.25″).
  • 25 Gallon Tank measurements – 33 1/2″ x 17″ x 10″ (+/- .25″).
  • Combo Pack of RV Fresh & Gray Water Tanks, 20 Gallon & 25 Gallon.
Check Stock

Emoshayoga Coffee Filter Basket Durable Filter Basket Strainer Stainless Steel Filter Basket Coffee for Pressure Coffee Machine

  • PVC for corrosion resistance and less weight than fittings made from metals.
  • Basket strainer pipe fitting for adding filtration to a pipe line.
  • Socket weld connection option to allow a smooth bore and better fluid flow, and a female threaded option for connecting to male threaded pipe fittings.
  • Meets NSF/ANSI 61 standards for potable water use.
Check Stock

Class A Customs | RV Fresh and Gray Water Tank | Combo Pack (40 Gallon & 55 Gallon) | RV Water Holding Tanks

  • Combo Pack of RV Fresh & Gray Water Tanks, 40 Gallon & 55 Gallon.
  • NSF Certified MATERIALS used for manufacturing process -- ALL PARTS of tank made with NSF International NSF/ANSI Std 61 approved Medium Density Polyethylene (MDPE) Resin with UV-8 stabilization -- The tank and fittings are both made out of this material..
  • These 40 gallon and 55 gallon tanks each have two 1 1/2" female NPT fittings (fitting will be closed, to use remove inner membrane with razor knife) and two 1/2" female NPT fittings (fitting is not closed, this fitting is completely open).
  • 40 Gallon Tank Measurements - 39 1/2" x 18" x 13" (+/- .25").
  • 55 Gallon Tank Measurements - 37 1/2" x 19 1/2" x 17 1/2" (+/- .25").
Check Stock

Lamerto OBD2 Budget D & B-series Tucked Engine Harness for Ci-vic Integra B16 B18 D16

  • Lamerto Engine Harness CNCH-OBD2-1 Replacement for Hon-da Ci-vic / Inte-gra B16 B18 D16.
  • Will fit for following models: Hon-da Ci-vic Inte-gra B16 B18 D16.
  • Please carefully check the OEM part number and illustrations to make sure it is compatible with your car..
Check Stock

Mr Shave B-Series B16 B17 B18 VTEC Low-Profile Slim Valve Cover Hardware Washer Bolt Color Black

  • For Acura and for Honda B-Series Vtec Low Profile Aluminum Valve Cover Washer.
  • Complement your Low-Profile Valve Cover Hardware with Lower Control Arm Dress-Up Washers. For Vtec Engines only..
  • Fit B-Series - B16A2 / B16A3 / B17A1 / B18C1 / B18C5.
  • High performance, meets or exceeds OEM standards, 100% tested before shipping.
  • Compatible for OEM Valve Covers As Well As OEM And Most Aftermarket Spark Plug Wire Covers.
Check Stock

Dewhel B-SERIES B16 B17 B18 VTEC LOW-PROFILE SLIM VALVE COVER HARDWARE WASHER BOLT Color Black

  • Compatible with Acura / Honda B-Series Vtec Low Profile Aluminum Valve Cover Washer.
  • Complement your Low-Profile Valve Cover Hardware with Lower Control Arm Dress-Up Washers. For Vtec Engines only..
  • Fit B-Series - B16A2 / B16A3 / B17A1 / B18C1 / B18C5.
  • Made By OEM Approved and ISO Certified Manufacturers With Materials That Meets Or Exceeds Strict OEM Requirements.
  • Compatible With OEM Valve Covers As Well As OEM And Most Aftermarket Spark Plug Wire Covers.
Check Stock

TASAN RACING B-Series B16 B17 B18 VTEC Low-Profile Slim Valve Cover Hardware Washer Bolt Blue

  • Material Type:Made of high quality materials.
  • Fitment:Fit for B-Series - B16A2 / B16A3 / B17A1 / B18C1 / B18C5.
  • Complement your Low-Profile Valve Cover Hardware with Lower Control Arm Dress-Up Washers. For Vtec Engines only..
  • Compatible With OEM Valve Covers As Well As OEM And Most Aftermarket Spark Plug Wire Covers..
  • Packing Include:4 x 67mm Mounting Bolts, 4 x 26mm Mounting Bolts, 4 x 22mm Mounting Bolts, 4 x 11mm Mounting Bolts,12 x Aluminum Washers, 8 x O-Ring Gaskets..
Check Stock

Elkay Everyday LK3001CR Deck Mount Kitchen Faucet with Remote Lever Handle and Side Spray, Chrome

  • LEAD-FREE COMPLIANT: Certified to NSF/ANSI 61 and 372 to meet all federal and state regulations for low or no-lead products..
  • LOW FLOW: Includes water-saving features..
  • INCLUDES TWO AERATORS: Comes installed with 1.5 GPM water-saving aerator.
  • optional 2.2 GPM aerator insert included..
  • REMOVABLE CARTRIDGE: Allows for easy repair and replacement of cartridge..
  • QUICK CONNECT SIDE SPRAY FITTINGS: Easier installation fittings that snap together in seconds.
  • FULLY ROTATING SPOUT: Spout rotates a full 360 degrees.
  • perfect for use in kitchen islands and bar/prep sinks..
Check Stock

Rev9(HP-MF-B16-TM3-11G-44) Turbo Manifold Stainless Steel T304 11 Gauge Pipe, Compatible with Honda B16 B18 Engine Motor

  • Product Details Honda Civic / Acura Integra B16 B18 (DOHC VTEC MOTOR).
  • Equal length top mount stainless steel T3 turbo manifold.
  • "- 321 stainless steel - Raw finishing / non polished - Equal length runners for maximum flow - 2.1 mm wall thickness ( will not crack like the cheap ones out there ) - Life time warranty - 44 v-band external wastegate flange - T3 flange - Fits T3 and T3/T4 hybrid turbos - Fits all B16 B18 ( Honda Civic / Acura Integra B series VTEC DOHC ).
Check Stock