Top Ansi Fitting Fastener

TEKTON 1/2 Inch Drive x 34 mm 6-Point Impact Socket | SID22134

  • Size is marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
  • 6-point socket opening provides an exact fit for hex fasteners.
  • Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
  • Meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.
Check Stock

Sunex 9707MA Jumbo Metric Combination Wrench Set, 7Piece (Includes Roll-Case) CRV

  • RADIUS CORNERS: Grip the flat sides of the fastener head instead of the corner to prevent round-off..
  • RAISED PANEL DESIGN: Reduces the weight of the tool while maintaining overall strength..
  • CHROME PLATING: For strength and the prevention of rust, corrosion and deformation..
  • EASY IDENTIFICATION: Sizes stamped on both sides for fast and easy identification..
  • ANSI STANDARDS: Heat treated and tempered to meet or exceed ANSI Standards for strength..
Check Stock

TEKTON 1/2 Inch Drive x 34 mm Deep 6-Point Impact Socket | SID23134

  • Size is marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
  • 6-point socket opening provides an exact fit for hex fasteners.
  • Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
  • Meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.
Check Stock

TEKTON 1/2 Inch Drive x 19 mm Deep 12-Point Impact Socket | SID23319

  • Size is marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
  • 12-point socket opening provides an exact fit for 12-point fasteners.
  • Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
  • Meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.
Check Stock

RIMKOLO 107-Piece Bit Socket Set,1/4

  • DURABLE S2 Material: The bit socket is made of S2 alloy steel, which is strong and has good toughness, not easy to break.The chamfering design of the head increases the contact area, not easy to wear,more durable..
  • HEAT TREATMENT CR-V: The socket base is made of chrome vanadium steel with stronger hardness after heat treated and provides higher torque.The surface is mirror chrome plated,and the E-Torx Sockets with manganese phosphate coating are more anti-corrosive and anti-rust than Black oxide coating, extending the service life..
  • CHAMFERING DESIGN: Each bits head has a unique chamfering design, which makes it easier to insert the bit head into the fastener. And increase the contact area with the fastener, reduce wear, protect the fastener.Complies with ANSI standards..
  • COMPLETE ACCESSORIES: 107PCS high quality bit socket set,including 1/4", 3/8" and 1/2"drive Torx / extra long Torx / tamper proof Torx/hex / ball end hex SAE & metric bit set. Complete accessories to meet your needs..
  • EASY TO IDENTIFYWith a storage toolbox, easy to carry. Specifications are clearly printed on the tool box and socket, which is convenient for identification and sorting, saving you time..
Check Stock

MIXPOWER 1/2-Inch Drive Deep Impact Socket, 21mm, CR-V, Metric, 6 Point, Deep

  • 【Premium CR-V Steel】Made from drop forged and heat treated chrome vanadium steel (50BV30).
  • 【Durable】Corrosion-resistant black electroplate finish, providing the durability for a hard use..
  • 【High-torque】Radius corner design, 6-point opening reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners..
  • 【Laser Marking 】High-contrast size marking is permanently laser etched and hard stamped size markings, double marked..
  • 【Service Guarantee】All MIXPOWER Tools meet or exceed ANSI performance standards. It comes with 1 year quality guarantee..
Check Stock

Sunex 2645, 1/2 Inch Drive Impact Socket Set, 26-Piece, Metric, 10mm-36mm, Cr-Mo Alloy Steel, Radius Corner Design, Heavy Duty Storage Case

  • LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry's leading warranty program and exchange warranted products directly with Sunex..
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools..
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners..
  • CHAMFERED OPENING: Quickly aligns fastener to socket..
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification..HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage..MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability..26 PIECE SET.METRIC: 10mm to 36mm.
Check Stock

Sunex 9914A 14 Piece Angle Head SAE Wrench Set (FULL POLISH) CRV

  • V-GROOVE DESIGN: Aligns better with the fastener to create an anti-slip grip and prevent round off..
  • ANGLED HEADS: 15 and 60 degree angled heads provide greater access into tight work areas to complete the job easily..
  • CHROME PLATING: For strength and the prevention of rust, corrosion and deformation..
  • ANSI STANDARDS: Heat treated and tempered to meet or exceed ANSI Standards for strength..
  • EASY IDENTIFICATION: Sizes stamped on both sides for fast and easy identification..
  • DURABLE CANVAS POUCH: Included for easy storage and transportation..
  • STRENGTH & DURABILITY: Upgraded steel from High Carbon to Chrome Vanadium for more strength and durability..
Check Stock

Sunex 3325, 3/8 Inch Drive Master Impact Socket Set, 25-Piece, SAE, 5/16'-1”, Standard/Deep, Cr-Mo Steel, Radius Corner Design, Heavy Duty Storage Case, Includes Universal Joint

  • -CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools..
  • -RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners..
  • -CHAMFERED OPENING: Quickly aligns fastener to socket..
  • -DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification..
  • -HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage..
  • -MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability..
  • -UNIVERSAL JOINT: Adapts any socket for use in swivel applications..
Check Stock

Sunex Tools 9707 Jumbo Fractional Combination Wrench Set, 7Piece (Includes Roll-Case), SAE Jumbo Combination Wrench Set

  • RADIUS CORNERS: Grip the flat sides of the fastener head instead of the corner to prevent round-off..
  • RAISED PANEL DESIGN: Reduces the weight of the tool while maintaining overall strength..
  • CHROME PLATING: For strength and the prevention of rust, corrosion and deformation..
  • EASY IDENTIFICATION: Sizes stamped on both sides for fast and easy identification..
  • ANSI STANDARDS: Heat treated and tempered to meet or exceed ANSI Standards for strength..
Check Stock

Sunex 2641, 1/2 Inch Drive Deep Impact Socket Set, 19-Piece, SAE, 3/8' - 1-1/2', Cr-Mo Alloy Steel, Radius Corner Design, Dual Size Markings, Heavy Duty Storage Case

  • DEEP: Access to parts that need to reach further into the socket, such as bolted joints and clamp bolts.
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • CHAMFERED OPENING: Quickly aligns fastener to socket.
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.
  • HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage.
  • MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability.
Check Stock

Sunex 1848, 1/4 Inch Drive Master Impact Socket Set, 48-Piece, SAE/Metric, 3/16 Inch - 9/16 Inch, 4mm - 15mm, Standard/Deep, Cr-Mo Alloy Steel, Radius Corner Design, Heavy Duty Storage Case

  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools..
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners..
  • CHAMFERED OPENING: Quickly aligns fastener to socket..
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification..
  • HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage..
  • MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability..
Check Stock