Top Ansi Hexagon Flange Bolt

(5 Sets) 3/8-16x3\ Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 3/8" | Length: 3" | Thread Type: 16 tpi Coarse Thread (Standard).
  • Package includes ten each of bolts, hex nuts , Flat & Lock washers.
Check Stock

(5 Sets) 5/16-18x5\ Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 5/16" | Length: 5" | Thread Type: 18 tpi Coarse Thread (Standard).
  • Package includes ten each of bolts, hex nuts , Flat & Lock washers.
Check Stock

(10 Sets) 1/4-20x2\ Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 3/8" | Length: 4" | Thread Type: 16 tpi Coarse Thread (Standard).
  • Package includes four each of bolts, hex nuts , Flat & Lock washers.
Check Stock

(10 Sets) 1/4-20x3' Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 1/4" | Length: 3" | Thread Type: 20 tpi Coarse Thread (Standard).
  • Package includes ten each of bolts, hex nuts , Flat & Lock washers.
Check Stock

(10 Sets) 1/4-20x1-1/2" Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 1/4" | Length: 1-1/2" | Thread Type: 20 tpi Coarse Thread (Standard).
  • Package includes ten each of bolts, hex nuts , Flat & Lock washers.
Check Stock

[2-Pack] SBTRD204-12 - 3/4\ Bore 3-Bolt Mounted Flange Block Unit, Bearing SB204-12G, Cast Iron Housing TRD204, Bolt Size M8 (0.3125 inches)

  • ✔️ [Parts] - 3-Bolt Mounted Flange Block Unit.
  • ✔️ [Insert Bearing] - Bearing Number SB204-12G, Inner Diameter 3/4".
  • ✔️ [Housing] - Cast Iron Housing TRD204.
  • ✔️ [Quantity in Package] - 2 Pieces of 3-Bolt Mounted Flange Block Unit.
Check Stock

Prime-Line 9086656 Finished Hex Nuts, Grade 5, 7/16 inch-20, Grade 5 Zinc Plated Steel, (25-pack)

  • Product name: Flange nuts (fine teeth), used for thin flange nuts. The thin nuts have good retreatability, are suitable for anti-vibration, the gap is easy to adjust, and is suitable for places where the gap or torque needs to be adjusted..
  • for detailed dimensions, please refer to the drawing..
  • Package content: 12 x flange nuts M8x1.0 (fine teeth) "Product guarantee: It is definitely what you bought. If there are any problems with this product, please contact me and give you a 100% satisfactory answer! 》.
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Exhaust Flange, 2inch Universal Flat Oval Split Exhaust Flange Connection Repair Kit Low Carbon Steel Exhaust Downpipe Flange Replacement Accessory

  • Function: This 2-inch flat elliptical exhaust flange provides an effective fixing solution for the exhaust system, removing the intercooler system and turbine parts, such as charging pipes, intake pipes, diesel engines, turbochargers Compressor and heavy-duty exhaust system, etc..
  • Practical Exhaust Flange Repair Kit: The diameter of the center hole of this product is about 2 inches, and the oval bolt hole is about 2 inches. It has the characteristics of fine workmanship, high precision, high sensitivity, practicality and reliability..
  • Great Quality Low Carbon Steel Material: Our exhaust flange is made of high-quality low-carbon steel, which can ensure high hardness, rust resistance, effectively provide services while ensuring long-term use, and has good practicability..
  • High Precision: Our exhaust flanges are produced in strict accordance with the process, and each part is precision processed to achieve precise tolerances to achieve trouble-free performance. Old or damaged adapters can be replaced directly. Please rest assured to buy..
  • Easy Installation: This exhaust flange can be used without welding or cutting the exhaust pipe, just connect it to the flared pipe, and then bolt it to the existing flange you need to connect That's it, the installation st....
Check Stock

EVIL ENERGY 3.0 Inch V Band Clamp for Flange Kit Stainless Steel

  • [Size] Fit for EVIL ENERGY 3.0inch Flange..
  • [Advantage] V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even pressure at the flange..
  • [Application] Widely used in exhaust system, turbocharger, downpipe, muffler etc..
Check Stock