Top Ansi Precision Machined Part

Evike ARES Licensed Remington MSR Bolt Action Spring Powered Airsoft Sniper Rifle Model MSR-338 / Tan

  • ◙ This is not a listing for an individual Airsoft part. No parts are designed for real weapons. Batteries, scopes, and other accessories NOT....
  • Bolt action single shot spring powered rifle.
  • Precision CNC machined aluminum receiver.
  • Precision CNC machined handguard and stock.
  • 545mm Picatinny flat top rail for optics.
Check Stock

Greenlee 0453-17C Screw Holding Screwdriver, Phillips Tip #1

  • Precision-machined tip provides accurate fit and torque without slippage.
  • Tip-Ident quickly identifies the screwdriver type and tip orientation.
  • Cushion-Grip handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance.
  • Internal flanges inside handle provide solid, twist-resistant blade anchor.
  • Meets or exceeds applicable ASME / ANSI specifications.
Check Stock

DEWALT DCP580B 20V MAX Brushless Planer (Tool Only)

  • Brushless motor of the electric hand planner provides power and runtime.
  • The hand planer featuring 30,000 cuts per minute achieves a fast removal rate.
  • Calibrated depth adjustment knob to 1/256-inch (0.01 mm. approximately).
  • Precision-machined front and back aluminum shoes ensure parallelism of cut.
  • Kickstand allows user to rest the planer on work surface without gouging the material.
  • Precision machined groove in front shoe allows for edge chamfering.
  • Poly-V drive belt provides increased belt durability.
  • Ergonomically designed handle provides greater comfort and less user fatigue.
  • Replacement blades DW6654 Part Number: N447366.
Check Stock

Stanley 2-65-014 PZ Screwdriver-Set\Cushion Grip\ (10 Piece), Multicolor

  • Precision-machined tip provides accurate fit and torque without slippage.
  • Tip-Ident quickly identifies the screwdriver type and tip orientation.
  • Cushion-Grip handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance.
  • Internal flanges inside handle provide solid, twist-resistant blade anchor.
  • Meets or exceeds applicable ASME / ANSI specifications.
Check Stock

JDMON Compatible with Ignition Distributor Chevy GMC C1500 K1500 Pickup Isuzu Oldsmobile 4.3L V6 Vortec 1996-2007 Replace 12598210 1103976 1104078 93441559

  • Compatible with 4.3L V6 engines. Chevy ＆GMC：1996-2005 Astro，Blazer，express 2500，Jimmy，Safari，Savana 2500.1996-1998 C1500，K1500....
  • Replace Part Number：1103976, 1104078, 12598210, 93441559, 8011040570，DST1639，12570426，1104050，8011040500，1104057，GM01，GM02，841639....
  • Includes：The complete assembly of the ignition distributor including the ignition module, cap and rotor eliminates the need to use old parts or....
  • Precision Process：Precision machined bodies assure correct fit and accurate mount locations.Precision machined ground shafts assure high speed....
  • 100% Tested：All electronic module components of this ignition distributor are 100% computer tested to ensure full functionality..
Check Stock

Klein Tools 605-8 1/4-Inch Cabinet Tip Screwdriver, Heavy Duty, with 8-Inch Shank

  • Cushion-Grip handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance.
  • Internal flanges inside handle provide solid, twist-resistant blade anchor.
  • Meets or exceeds applicable ASME / ANSI specifications.
  • Tip-Ident quickly identifies the screwdriver type and tip orientation.
Check Stock

Bumlon Bike Multifunction Tools

  • 【Front sight adjust tool】 Front sight adjust tool has dual ends to work with both 4 and 5 prong front sights ( A1 / A2 Style ) very well, which made solid steel construction. Makes adjusting front sight post quick and easy..
  • 【Double ended adjust tool】 Double ended adjust elevation ( 4 prong/5 prong ) front post adjusting tool for adjustment of 5-Prong A1 or 4-Prong front sights..
  • 【Steel part】One-piece precision machining steel part.Front sight adjustment tool to push down and adjust the front post faster and easier to adjust the sight..
  • 【Patterned surface 】Easy to hold due to the patterned textured grip surface,precision machined steel part and friendly use..
  • 【Precise adjustment】 Easy precision elevation adjustments for standard 4-Prong and 5-Prong front posts enhancing shooting accuracy.Note: since the product is mass-produced, there will be a little flaw on the surface and inside of the product. If you are more concerned about this, please buy carefully.In addition, the size of the product has been marked on the picture. Please pay attention to the size when ordering to avoid inappropriate size after purchase..
Check Stock

Klein Tools 665 #1 Square Recess Screwdriver with 8-Inch Round Shank and Cushion Grip Handle

  • Screwdriver works on most combination head receptacle, switch and panel screws.
  • Tip-Ident color coded handle end quickly identifies the screwdriver type and tip orientation.
  • Special heat-treated, chrome plated shaft for corrosion resistance and Cushion-Grip handle for greater torque and comfort.
  • Internal flanges inside handle provide solid, twist-resistant blade anchor.
  • Meets or exceeds applicable ASME / ANSI specifications.
Check Stock

GETUHAND Flexhead Adjustable Wrench 8\

  • ADJUSTABLE wrench fits Approx 1"/25mm Jaw opening with precision machined Jaws and knurled adjustment worm. accepts a wide range of fastener sizes，perfect for home appliance maintenance and repairing..
  • RATCHETING flexhead wrench features a particular ratcheting design so you can tighten the screws continuously. The ratchet function can be switched off by switch.
  • FLEX wrench allows the head to rotate up to 180° to access hard-to-reach fasteners.
  • PREMIUM QUALITY: Forged chrome vanadium steel is strong and durable. Meets ANSI specifications.
  • COMMON APPLICATIONS: This cool gadgets can be used in automobile industry, home maintenance, manufacturing, construction and other industries, also favored by home decoration DIY design enthusiasts.Stored in a paper box,a perfect gift for Christmas, Birthdays,Fathers day and other Holidays for any handyman, dad, boyfriend, brother, men, or women.
Check Stock

Klein Tools 603-4 Screwdriver, #2 Phillips Tip with Cushion Grip Handle, Precision Machined Electrician Screwdriver, 4-Inch

  • Precision machined Phillips tip provides a more consistent geometric symmetry than conventional Phillips screwdrivers to accurately fit and torque without slippage.
  • Tip-Ident quickly identifies the screwdriver type and tip orientation and Cushion-Grip handle for greater torque and comfort.
  • Premium chrome-plated for smooth feel and corrosion resistance.
  • Internal flanges inside handle provide solid, twist-resistant blade anchor.
  • Meets or exceeds applicable ASME / ANSI specifications.
Check Stock

Hauska AR A1 A2 Dual Front Post Sight Gunsmithing Adjustment Tool Dual End Sight Adjustment Tool 4-/5-Prong Style for AR A1 A2 Style

  • This tool has dual ends to work with both 4 and 5 prong front sights ( A1 / A2 Style ) Very well made solid Steel..
  • Adjust Elevation of either 4-Prong or 5-Prong A1/A2 Front Sight and Post.One Piece Precision Machined Steel Part..
  • Optimal Length and Slimmer Ergonomic Design for Ease of Use One Piece Precision Machined Steel..
  • This is Front Sight Adjust tool for AR 4 / 15 rifles and like Style sights..
  • Patterned Surface for Easy Grip.Optimal Length and Slimmer Ergonomic Design for Ease of Use..
Check Stock

EKLIND 92400 PSD Hex (allen) Precision Screwdriver - 8pc set Metric MM sizes 0.7-4

  • MADE IN AMERICA- High quality, Industrial Grade Professional Tools made in the U.S.A..
  • Contains MM Sizes: 0.7, 0.9, 1.3, 1.5, 2, 2.5, 3, & 4.
  • EKLIND hex keys (allen wrenches) are used to drive internal hexagon socket (allen head) fasteners.
  • OPTIMUM STRENGTH- These EKLIND tools are made with EKLIND Alloy Steel that is heat treated, quenched and tempered for optimum strength, torque and ductility for safety and coated with a rust resistant finish.
  • EKLIND PSD- Precision Screwdrivers have precision machined tips, larger handles with a soft overmold for comfort and ergonomics and a large spinner cap for precise control with the size molded into the cap.
  • IDENTIFY YOUR TOOLS- Metric sizes are color coded in blue so you can reach for the correct tool quickly.
  • MEETS OR EXCEEDS ALL APPLICABLE STANDARDS- EKLIND tools meet or go beyond the standard regulations set forth in ANSI, ASME, RoHS, REACH, CA Prop 65 and Dodd-Frank Conflict Minerals Legislation.
Check Stock