Top Anti Wear Hydraulic Fluid

Maxima Racing USA 80-86916 DOT 4 Brake Fluid

  • Non-silicone based, long life and 100% synthetic, DOT 5.1 BRAKE FLUID conforms to the highest standards in brake fluid performance..
  • DOT 5.1 is specially designed for Anti-Locking Brake Systems (ABS)..
  • With a high dry boiling point of 270C and a high wet boiling point of 185C, DOT 5.1 delivers the best brake performance..
  • 100% synthetic, polyglycol-based. Specially designed for anti-locking brake system (ABS)..
  • Compatible with All types of hydraulic actuated brakes and clutch systems (not to be used with silicon and mineral-based brake fluids)..
Check Stock

Motul 105776 Set of 4 Dexron III Automatic Transmission Fluid 1-Liter Bottles

  • For use in all systems where DEXRON or MERCON standard is required. // For automatic gearboxes/torque converters/power steering systems/boat reversing gears/hydrostatic transmissions/hydraulic or mechanical systems that require DEXRON or MERCON standards..
  • MOTUL DEXRON III can be used (and mixed) for applications where DEXRON/B DEXRON/DEXRON II D/DEXRON IIE/DEXRON III is required..
  • Technosynthese ATF features more fluid at low temperature than Dexron IIE oils, which allows easier gear change in cold weather..
  • Higher oxidation resistance than Dexron IIE standard. // Oil film stability under high temperature. // Anti-wear, Anti-corrosion, Anti-foam..
  • Color: Red. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/33.4 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/7.2 mm²/s. // Viscosity Index: ASTM D2270. // Flash Point: ASTM D92/204°C/399°F. // Pour Point: ASTM D97/-48°C/-54°F..
Check Stock

Chief Directional Control Valves 1 Spool 4 Way 4 Position - Hydraulic Directional Control Valve with Spring Center - 25 GPM, 1/2\ NPT Work Port, 3/4\ NPT Outlet Port, 3000 PSI, 16 lb, 220572

  • SPECIFICATIONS: The Chief P40 manual Directional Control Valve for hydraulic systems has a 4 way, 3 pos tandem center with 10 GPM, maximum working pressure of 3625 PSI, temperature of 176°F, standard SAE 8/10 inlet/outlet ports. It weighs 9.4 lb..
  • FAST ACTING: Our 4 way hydraulic control valve has 4 ports that facilitate super fast extension and retraction of double-acting hydraulic cylinders, producing sufficient pressure required in a wide range of applications..
  • PRECISE: This directional control valve hydraulic has a two spool construction equipped with lands and undercuts. The precision machined construction allows the spools to open and close fluid flow paths effortlessly with high accuracy every time..
  • EFFICIENT: Our 3 pos, hydraulic directional control valve allows the hydraulic fluid back into the tank without forcing it over the relief valve, reducing heat generation and a buildup of backup pressure..
  • MULTIPURPOSE: The P40 hydraulic valves are extremely versatile and can perform several functions in their central position - they can easily unload hydraulic pumps, stop, allow, or change the direction of fluid flow in hydraulic circuits. Power beyond and closed center plugs may be added and are sold separately..
Check Stock

Amalie 160-62836-56 Ford Type F ATF Trans

  • Motorcraft MERCON V is a premium-quality automatic transmission fluid.
  • recommended by Ford Motor Company for use in Ford, Lincoln and Mercury vehicles that require either MERCON V or MERCON type fluid.
  • Do not use in applications where MERCON SP, MERCON LV, continuously variable chain type transmission fluid, Motorcraft premium automatic transmission fluid, FNR5 automatic transmission fluid or Type-F automatic transmission fluid is recommended.
  • Do not use in transfer cases where MERCON ATF was previously recommended.
  • Motorcraft MERCON V is suitable for use as a hydraulic oil in a wide variety of industrial applications that call for an ISO 46 or SAE 20W viscosity grade hydraulic oil.
Check Stock

Motorcraft Mercon SP XT-6-QSP transmission fluid case 12 quarts

  • Motorcraft MERCON V is a premium-quality automatic transmission fluid.
  • recommended by Ford Motor Company for use in Ford, Lincoln and Mercury vehicles that require either MERCON V or MERCON type fluid.
  • Do not use in applications where MERCON SP, MERCON LV, continuously variable chain type transmission fluid, Motorcraft premium automatic transmission fluid, FNR5 automatic transmission fluid or Type-F automatic transmission fluid is recommended.
  • Do not use in transfer cases where MERCON ATF was previously recommended.
  • Motorcraft MERCON V is suitable for use as a hydraulic oil in a wide variety of industrial applications that call for an ISO 46 or SAE 20W viscosity grade hydraulic oil.
Check Stock

Genuine Honda Fluid 08200-9008 ATF-DW1 Automatic Transmission Fluid - 1 Quart

  • Motorcraft MERCON V is a premium-quality automatic transmission fluid.
  • recommended by Ford Motor Company for use in Ford, Lincoln and Mercury vehicles that require either MERCON V or MERCON type fluid.
  • Do not use in applications where MERCON SP, MERCON LV, continuously variable chain type transmission fluid, Motorcraft premium automatic transmission fluid, FNR5 automatic transmission fluid or Type-F automatic transmission fluid is recommended.
  • Do not use in transfer cases where MERCON ATF was previously recommended.
  • Motorcraft MERCON V is suitable for use as a hydraulic oil in a wide variety of industrial applications that call for an ISO 46 or SAE 20W viscosity grade hydraulic oil.
Check Stock

Prolong Super Lubricants PSL10020 Anti-Friction Metal Treatment, 1 Gallon

  • Works with all brands of synthetic and petroleum-based oils. Including full synthetic, semi- synthetic, conventional, and mineral. Gas or Diesel engines..
  • Recommended to be used in all automobile, truck, lawn, marine, agriculture and heavy-duty equipment..
  • Increases horsepower, lowers operating temperatures and reduces engine noise and vibration in all engines..
  • USAGE: Use 2 ounces per quart of oil in crankcases, 3 ounces for heavy duty and towing applications. Transmissions (Automatic or Manual) Use 1 ounce per quart of transmission fluid. Differentials use 1 ounce per quart of differential fluid. Power steering systems use 1 ounce per quart of fluid. Hydraulic fluid 1 ounce per 2.5 gallons of hydraulic fluid. Motorcycles 1 ounce per quart of fluid max. Lasts multiple fluid changes but maybe used more frequently for best results..
Check Stock

Genuine Mazda Fluid (0000-77-120E-05) MERCON-V Automatic Transmission Fluid – 1 Quart

  • Motorcraft MERCON V is a premium-quality automatic transmission fluid.
  • recommended by Ford Motor Company for use in Ford, Lincoln and Mercury vehicles that require either MERCON V or MERCON type fluid.
  • Do not use in applications where MERCON SP, MERCON LV, continuously variable chain type transmission fluid, Motorcraft premium automatic transmission fluid, FNR5 automatic transmission fluid or Type-F automatic transmission fluid is recommended.
  • Do not use in transfer cases where MERCON ATF was previously recommended.
  • Motorcraft MERCON V is suitable for use as a hydraulic oil in a wide variety of industrial applications that call for an ISO 46 or SAE 20W viscosity grade hydraulic oil.
Check Stock

Enerpac ZU4408PB Universal Electric Pump with VM43M Jog Valve Basic 115V and 8 L Usable Oil Capacity

  • Electric hydraulic pump with 115V motor for powering a double-acting hydraulic cylinder or tool.
  • Four-way, three-position valve to control direction of hydraulic fluid in double-acting system.
  • Flow rate of 60 cu. in. per minute at maximum operating pressure of 10,000 psi.
Check Stock

NorTrac Steel Hydraulic Fluid Reservoir - 3-Gal. Capacity

  • Sight level fluid gauge with thermometer allows you to monitor fluid levels and temperature of hydraulic fluid.
  • Magnetic drain plug and threaded breather cap with 40 micron filter help to prevent oil contamination, which can lengthen the life of your hydraulic equipment.
  • Sturdy welded-on 2in. o.c. mounting brackets with 4-bolt mount.
  • Can be used with compatible suction strainer Item# 778644 (sold separately).
Check Stock

NorTrac Steel Hydraulic Fluid Reservoir - 5-Gal. Capacity

  • Sight level fluid gauge with thermometer allows you to monitor fluid level and temperature of hydraulic fluid.
  • Magnetic drain plug and threaded breather cap with 40 micron filter help to prevent oil contamination, which can lengthen the life of your hydraulic equipment.
  • Sturdy welded-on 2in. o.c. mounting brackets with 4-bolt mount.
  • Can be used with compatible suction strainer Item# 778644 (sold separately).
Check Stock

Motorkote MK-HL32-06 Heavy Duty Hyper Lubricant Engine Treatment, 32-Ounce, Single, Black

  • Works with all brands of synthetic and petroleum-based oils. Including full synthetic, semi- synthetic, conventional, and mineral. Gas or Diesel engines..
  • Recommended to be used in all automobile, truck, lawn, marine, agriculture and heavy-duty equipment..
  • Increases horsepower, lowers operating temperatures and reduces engine noise and vibration in all engines..
  • USAGE: Use 2 ounces per quart of oil in crankcases, 3 ounces for heavy duty and towing applications. Transmissions (Automatic or Manual) Use 1 ounce per quart of transmission fluid. Differentials use 1 ounce per quart of differential fluid. Power steering systems use 1 ounce per quart of fluid. Hydraulic fluid 1 ounce per 2.5 gallons of hydraulic fluid. Motorcycles 1 ounce per quart of fluid max. Lasts multiple fluid changes but maybe used more frequently for best results..
Check Stock