Top Application Motor

Makita GD0800C 1/4\ SJS™ Die Grinder, Teal

  • Powerful 6. 6 AMP motor delivers 7, 000-28, 000 RPM for faster material removal.
  • SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop.
  • Variable speed control dial enables user to match the speed to the application.
  • Constant speed control automatically applies additional power to the motor to maintain speed under load.
  • Soft start suppresses start-up reaction for smooth start-ups and longer gear life.
  • Electronic current limiter helps protect the motor from overload.
  • Directional air-flow vents channel the tool's air output away from the user's face.
  • Labyrinth construction prevents debris from penetrating the motor, bearings and gears for longer tool life.
  • Zig-zag varnish protects the armature coil from dust and debris for longer motor life.
Check Stock

Makita XDT13Z 18V LXT Lithium-Ion Brushless Cordless Impact Driver Tool Only,

  • BL Brushless motor delivers 1,500 inch pounds Of max torque.
  • Variable speed (0 to 3,400 RPM & 0 to 3,600 IPM) for a wide range of fastening applications.
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50 percent longer run time per charge.
  • The electronically controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
Check Stock

Limoss 451615 Model MD142-30-L1-150-228 Power Recliner Lift Chairs Motor Actuator Replacement

  • OEM Recliner Motor Actuator Replacement Model Limoss 451615 Model MD142-30-L1-150-228 made by Limoss.
  • Application in electric sofa, massage chair and etc, Check Label and also troubleshoot the switch/remote or power supply before ordering a motor.
  • 2 Pin Flat Round Power Transformer Connection.
  • Motor replacement is DC motor, small mounting dimensions,easy to install.
Check Stock

Makita 9566CV 6\ SJS™ High-Power Cut-Off/Angle Grinder

  • Powerful 13.0 AMP motor delivers more output and variable (4,000 - 10,000) RPM.
  • SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop.
  • Variable speed control dial enables user to match the speed to the application.
  • Makita 9566CV 6" SJS High-Power Cut-Off/Angle Grinder.
Check Stock

Electric Scooter Adult, 5 Inch 24V 180W Motor, Brushless Motor, Low Noise, with Hall Sensor, Electric Scooter Motor Replacement Parts

  • 1. HIGH SPEED MOTOR: Powerful Brushless DC Motor Kits 2500W 60V, Rated Speed No-load 4400rpm, Max can be 5800rpm, Motor Rated current 45A..
  • 2. DIY KITS, Electric Go kart Motor, small size, high speed, BLDC mid-drive motor with T8F sprocket, scooter motor with mounting bracket is easier to install and carry, with air cooling holes..
  • 3. DC motor kit reverse design, BLDC kart motor can run clockwise or counterclockwise through motor reverse line or handlebar reverse switch, and has a 3-speed function, low speed 50%, medium speed 70-80%, The high-speed speed is 100% efficient, but do not let the motor run in reverse for a long time, which is not safe for the motor life..
  • 4. 24 Mosfet 45A brushless motor controller. This speed controller uses high-quality materials. This controller has Hall, 3-speed, reverse, throttle, charging, electronic brake, power lock, light functions, etc..
  • 5. List and application of electric scooter motor kits, BLDC motor, speed controller, handlebar throttle, pedal throttle, power lock key, T8F tooth plate ring, T8F chain, 3-speed switch. Suitable for electric scooters, electric bicycles, mini motorcycles, off-road vehicles, electric karts, bicycles, four-wheel drive vehicles, other DIY projects, etc..
Check Stock

CHANCS TYC-50 Synchronous Motor 12V AC 5-6RPM CW/CCW 4W Gear Motor Fan Motor

  • This is a TYC-50 AC 12V 5-6RPM synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
  • 【Specification:】 Product Name : Synchronous Motor； Model : TYC-50； Shaft Diameter: 7mm ； Shaft Length: 16mm； Direction :....
  • 【Application:】 Widely used in hand-made, school project, electric fan shake heads, heaters, Christmas tree, prayer cylinders, air conditioners,....
  • 【About custom:】Motor shaft, line length, speed, voltage can be designed according to customer requirements. If you need other models of motor, you....
  • 【Attention:】 The applicable voltage of this motor is AC 12V, using DC power supply, the motor does not work.
Check Stock

Makita XTR01Z 18V LXT Lithium-Ion Brushless Cordless Compact Router

  • Makita built Brushless motor delivers faster and more accurate cuts in a variety of materials.
  • The electronically controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Variable speed control dial (10,000 to 30,000 RPM) to match the speed to the application.
  • Electronic speed control maintains constant speed under load.
  • On/off button with separate lock button helps prevent accidental startup of the tool for user and work piece protection.
Check Stock

Makita XT267T 18V LXT Lithium-Ion Brushless Cordless 2-Pc Combo Kit 5.0Ah ,

  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
  • The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Variable 2-speed 1/2" hammer Driver-Drill (0-550 & 0-2,100 RPM) with BL motor delivers 1,090 in.Lbs. Of max torque.
  • Variable speed impact driver (0-3,400 RPM & 0-3,600 IPM) with BL motor delivers 1,500 in.Lbs. Of max torque.
Check Stock

LDEXIN 5pcs 1/4 HP AC220V-50/60Hz Round Shell Fridge Component Overload Thermal Protector Relay Starter for Refrigerator

  • ✨【Overheat Guard】This starter is an overload thermal protector for 1/4HP refrigerator.Can replace the old damaged one starter..
  • ✨【Easily Use】Is easy to install, low profile and light weight, highly reliable performanc.Idea for compressor of air-condition or other electric protection appliance..
  • ✨【Motor Protector】Designed to prevent dangerous overheating that can cause motor failure.Ideal spare parts for refrigerator..
  • ✨【Application】The thermal protection is present to turn the motor off when excessive heat is generated within the motor circuitry, halting the temperature climb before it can burn up the motor..
  • ✨【Note】This overheating generally occurs when the motor is overloaded, when a bearing seizes up, when something locks the motor shaft and prevents it from turning, or when the motor simply fails to start properly. A failure to start may be caused by faulty start windings in the motor..
Check Stock

TYC 700108 Cadillac Replacement Blower Assembly

  • OE-comparable assembly complete with motor and fan (wheel) to save installation time and cost.
  • Superior materials and sub-components provide maximum strength and durability.
  • The fan (wheel) is pre-balanced with the motor to ensure perfect fitment and performance.
  • New (not refurbished), application-specific motor ensures maximum thermal efficiency.
  • OE-comparable wiring harness, no 'pigtail' connector.
Check Stock

TYC 700089 Chevrolet/Cadillac Replacement Blower Assembly

  • OE-comparable assembly complete with motor and fan (wheel) to save installation time and cost.
  • Superior materials and sub-components provide maximum strength and durability.
  • The fan (wheel) is pre-balanced with the motor to ensure perfect fitment and performance.
  • New (not refurbished), application-specific motor ensures maximum thermal efficiency.
  • OE-comparable wiring harness, no 'pigtail' connector.
Check Stock

Makita XT269T 18V LXT Lithium-Ion Brushless Cordless 2-Pc Combo Kit 5.0Ah

  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
  • The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Variable 2-speed 1/2" Hammer Driver-Drill (0-500 & 0-2, 000 RPM) with BL Brushless motor delivers 530 in pounds. Of max torque.
  • Variable speed impact driver (0-3, 400 RPM & 0-3, 600 IPM) with BL Brushless motor delivers 1, 500 pounds of max torque.
Check Stock