Top Arduino Cellular Shield

Screw Terminal Block Breakout Shield Module for Arduino UNO R3

  • Terminal Block Breakout Shield Module - for Arduino UNO R3. the item has been soldered and assembled..
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
  • Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment..
  • With power on LED indicating. red reset button on the side. with a ICSP adapter connect header. FR-4 fiber glass PCB, dual copper layers..
  • NOTE: the item not include Arduino Uno module..
Check Stock

Arduino MKR CAN Shield [ASX00005]

  • Connect an MKR board to a Controller Area Network (CAN) Bus and read/write to/from other devices in the network..
  • Program your Arduino MKR boards to become CAN peripherals and controllers..
  • Possible applications: Smart dashboards to existing vehicles, autonomous cars, drones, and industrial machinery..
  • Use the MKR CAN shield to connect to several types of industrial grade sensors, motors and displays..
  • Works for any of the Arduino MKR boards, and can be stacked on top of other MKR Shields!.
Check Stock

SunFounder Mega 2560 R3 ATmega2560-16AU Board Bundled with R3 Board and Ethernet Shield W5100 for Arduino

  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
  • This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory.R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • With this Ethernet Shield, for Arduino board can be used to connect to internet. Can be used as server or client. Directly plug puzzle board, no soldering required. It is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be ....
Check Stock

SunFounder Ethernet Shield W5100 Compatible with Arduino UNO R3 Mega 2560 1280 A057

  • With this Ethernet Shield, Compatible with Arduino board can be used to connect to internet..
  • Directly plug puzzle board, no soldering required..
  • It is directly compatible with Arduino official Ethernet Library..
  • It adds a micro-SD card slot, which can be used to store files for serving over the network..
Check Stock

Arduino MKR ETH Shield [ASX00006]

  • Expansion shield to bring your Arduino board online with simple-yet-reliable communication libraries, supporting TCP and UDP protocols over an Ethernet cable..
  • Rich collection of examples: browse the Internet, make a tiny web server, and send data to a cloud with little coding effort..
  • Use its micro-SD card slot to store sensor information, serve files to 8 simultaneously connected devices, or log traffic..
  • Stackable : other shields can be stacked on top of it adding new functionalities to your projects..
  • No extra power needed, gets it from your Arduino board. It is true plug and play!.
Check Stock

FTCBlock Protoshield V3 Prototype Expansion mega Shield Bread Board for Arduino Mega2560/1280 UNO

  • Latest uno proto shield prototype expansion board with 170 ties mini breadboard..
  • 170 ties mini breadboard based for arduino,compatible with UNO R3..
  • Components can be soldered directly on the board, or through the mini breadboard above..
  • Used in conjunction with the Duemilanove ProtoShield prototype expansion board, the circuit is used to build a prototype.
  • Full Compatible with Arduino Mega ATmega1280 / MEGA2560..
Check Stock

REXQualis 6PCS Small Breadborad 400 Point Solderless Breadboards for Proto Shield Distribution Connecting Blocks

  • 400 Points Breadboard with 2 Positive & Negative Power Lines on both ends..
  • White ABS Plastic Body with Black Printed Legend. Color Legend on Distribution Strips..
  • With Self-Adhesive Tape on the Back, Easy to Stick on the Arduino Prototype Shield..
  • Inter Connect Any Components with 20-29 Awg (0.3-0.8mm) Wire..
  • Good for Arduino Breadboard Jumper Wires kit Project and other Electrical DIY kits..
Check Stock

KEYESTUDIO MEGA Prototype Shield V3 Board for Arduino Mega, with 170 Points Breadboard Solderable, Easy to Use, Great for Prototyping Circuit Building Projects

  • Keyestudio MEGA ProtoShield makes it easy to design circuits and solder electronics. All the pads are tinned and easy to solder to..
  • The extra GPIO pin header on the right side is left empty making easier to install one according to the user's preference..
  • Be able to attach a Mini breadboard to make various circuit experiments. You can weld elements on the shield's prototyping area or connect circuits with tiny breadboard..
  • Better than most Arduino proto shields. It would be the best choice for you to use with Arduino MEGA controllers for either solder projects or prototyping..
  • MEGA Protoshield V3 for Arduino with mini breadboard are in good quality and well packed. Nice yellow on black color scheme..
Check Stock

4PCS Breadboards Kit Include 2PCS 830 Point 2PCS 400 Point Solderless Breadboards for Proto Shield Distribution Connecting Blocks

  • 400 point and 830 point breadboards are available to meet your various experimental needs..
  • White ABS Plastic Body with Black Printed Legend. Color Legend on Distribution Strips..
  • With Self-Adhesive Tape on the Back, Easy to Stick on the Arduino Prototype Shield..
  • Inter Connect Any Components with 20-29 Awg (0.3-0.8mm) Wire..
  • Good for Arduino Breadboard Jumper Wires kit Project and other Electrical DIY kits..
Check Stock

Ferwooh Nextion 3.5'' Display NX4832T035 Resistive Touch Screen HMI TFT Smart Module LCD for Arduino Raspberry Pi ESP8266

  • The 3.2 tft lcd expansion board is compatible with arduino mega 2560.
  • With tft lcd shield, you can use 3.2 touch screen with mega more conveniently.
  • This 3.2" lcd shield is NOT compatible with all 3.2" tft lcd. Please chheck it carefully..
  • You can buy 3.2" tft lcd for the shield by "Visit the DIYmalls Store".
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
Check Stock

Breadboard Solderless Prototype PCB Board ALLUS BB-009 (3pcs) 400 Pin with 4 Power Rails and Double Sided Tape for Raspberry Pi and Arduino

  • Solderless breadboard is convenient for the prototypes and circuit design experiment and other DIY projects. Perfect for Arduino, Raspberry Pi, and other programming boards.
  • Easy to use: the breadboard is made of ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling.
  • Self-adhesive back tape makes it easy to stick on a platform, like the Arduino prototype shield.
  • With tight plug-in contacts, the components will sit well after assembly and nothing will wobble..
  • The jumper wires are easy to insert into the breadboard..
Check Stock

Semi-Enclosed Enclosure Kit for Raspberry Pi BeagleBone Arduino UNO Mega

  • This is a multi-purpose semi-enclosed enclosure kit, Supports Raspberry Pi 1 Model A+ / Pi 1 Model B+ / Pi 2 Model B / Pi 3 Model B / Pi 3 Model B+ /....
  • It can be assembled very flexibly as a semi-closed enclosure, or as a two-layer bracket, or if you buy multiple sets, it can be used as a Raspberry Pi....
  • The space between the lower cover and the upper cover is 40mm, support Raspberry Pi direct stack HAT module, or Arduino stack SHIELD module, or....
  • The material of the lower cover and upper cover is 1.5mm thick aluminum plate, which is very strong, spacer/standoff and screws are nylon material..
  • Packing list: 2x covers, 8x M4x40mm standoffs, 4x M4x10mm spacers, 4x M4x8mm screws, 16x M2.5x6mm screws, 8x M2.5x10mm spacers (for Arduino MKR module....
Check Stock