Top Arduino Connector

AITRIP 5 PCS Pro Micro ATmega32U4 5V/16MHz Module Board with 2 Row pin Header Compatible with arduino Leonardo Replace ATmega328 Pro Mini (5PCS)

  • On-Board Micro-USB connector for programming.
  • Pay attention to : 1.When you open the for Arduino IDE software, could you please go to the tool and choose the board "for Arduino Leonardo".
  • 2: The acceptable voltage range is 6 to 9 V..
Check Stock

Arduino Portenta H7 [ABX00042]

  • Two processors that can run tasks in parallel with both cores communicating with one another. Each core can execute Arduino, mbedOS, micropython, and TensorFlow Lite code..
  • Comes in the Arduino MKR form factor but includes two extra 80-pin high density connectors. Extend your Portenta H7 to physical interfaces like Ethernet connectors, CAN bus peripherals, extra GPIO pins, SD card, etc..
  • Onboard WiFi and Bluetooth connectivity up to 65 Mbps transfer rate (using an external antenna)..
  • Perfect for high-end industrial machinery, laboratory equipment, computer vision, PLCs, robotics controllers, or even dedicated stationary computers..
  • Main features: industrial temperature rates, 8MB SDRAM, 16MB NOR Flash, DisplayPort output, USBC connector, cryptochip for secure data transactions..
Check Stock

SunFounder R3 BoardBundled with Mega 2560 R3 ATmega2560-16AU Board for Arduin

  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory..
  • R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
  • This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
Check Stock

ELEGOO UNO R3 Board ATmega328P with USB Cable(Arduino-Compatible) for Arduino

  • Clear prints on the female header connector, more precise and easier to use the wire..
  • The ELEGOO UNO R3 BOARD now uses an 16U2 instead of the ATMega8U2 chip. Faster transfer rates and more memory..
  • Control using ATMEL ATMEGA+328P chip(the same with Arduino UNO R3).
  • 100% compatible with the Arduino IDE and RoHS Compliant.
  • We have always cared about the customer experience and improve the product function details..
Check Stock

DZS Elec 6pcs 15CM 9V Battery Snap Connector Clip Lead Wire Experimental Battery Snap Power Cable With 5.5x2.1mm DC Male Plug for Arduino Project or LED Light Bar

  • Type: 9V T Type Battery Snap Connector, to power anything that running with a 9V battery..
  • Standard 5.5x2.1mm DC Male Plug, conveniently connect to other power module or Arduino board..
  • Cable: Approx. 15cm (6 inch) length, red wire for positive, black wire for negative, easy to connect to other equipment..
  • Application: Can be used for power supply or other 9V battery equipment, supplying power sourcec for Arduino Project or LED Light Bar etc. portable, easy to use..
  • Package: 6pcs 9V T Type Battery Snap Connector with DC 5.5x2.1mm Male Plug (NO battery included).
Check Stock

SparkFun Qwiic Pro Micro - USB-C (ATmega32U4) - Compatible with Arduino development board 5V/16MHz microcontroller AP2112 3.3V Voltage Regulator Castellated PTH pin pads Reset button Maximum 6V input

  • Small Compatible with Arduino board. Includes Reset button, 9x 10-bit ADC pins. 12x Digital I/Os (5 are PWM capable).
  • Improved version of the SparkFun Pro Micro. ATmega32U4 running at 5V/16MHz Supported under Arduino IDE v1.0.1+.
  • On-Board USB-C connector for programming. AP2112 3.3V Voltage Regulator. PTH Pads w/ Castellated Edges.
  • Hardware Serial Connections. Includes UART (i.e. Rx and Tx), Qwiic Connector for I2C, and SPI. Has onboard Reset Button. Input maximum of 6V. Dimensions: 1.3in x 0.7in..
  • The AtMega32U4 can have the bootloader overwritten if not used properly. There is a way to fix the bootloader if needed and instructions are available online. USB drivers may be needed to be installed on a computer to communicate with the board..
Check Stock

4xAA Battery Pack Holder Case Box to DC Barrel Jack Connector Compatible with Arduino(Pack of 2)

  • The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector.
  • The connector compatible with Arduino (among a number of other products) allowing you to easily make your project battery powered.
Check Stock

Battery Case Holder with Lead Wire Bundle,6PCS 9 V Battery Clip Connector T-Type 9 Volt Battery Clip with 2.1 x 5.5 mm Male DC Power Plug for 9V Battery Connector for Arduino DIY

  • Pure Copper Cord: 24awg UL Pigtail Cables(black),Holder Type: T-type Terminal with Leather Shell,Super Tight Snap Head..
  • 9V battery clip connector T-type with 2.1 x 5.5 mm male dc power plug for arduino diy..
  • The 9v battery clip connector is made of solid plastic and metal, which is not easy to break and has good contact performance, without risk of electric leakage..
  • Each 2.4 x 1.2 x 0.7cm, 9V battery clip connectors with 2.1 x 5.5 mm male dc power plug (not including 9 V batteries)..
  • This 9 volt battery clip t-type with 2.1 x 5.5 mm male dc power plug is widely used in student experiment, LED strip lights, or arduino or other devices with a 9V battery..
Check Stock

LattePanda Alpha 864s (Win10 Pro Activated) | Tiny Ultimate Windows/Linux Device

  • The soul of a MacBook in a phone-size board, a powerful SBC with Intel m3-8100Y.
  • The first SBC compatible with any desktop OS.
  • Dual M.2 connector, NVMe, GPU support, unlimited performance potential.
  • Compatible with Arduino, support any sensors and actors. HDMI, DP, eDP connector, 4K display support..
  • SHIPPING LIST: LattePanda Alpha 864s (Win10 Pro activated) x1, Active cooling fan x1, 45w PD Power adapter x1..
Check Stock

Glarks 700Pcs 2.54mm 1/2/3/4/5/6/7/8 Plug Connector Housing and Male/Female Pin Connector with 10 Wire Rainbow Color Flat Ribbon IDC Wire Cable Compatible with Dupont Connector Assortment Kit

  • Product Type: High quality single and double row connector housing pin connector with flat ribbon wire cable assortment kit..
  • Material: Crimp pin connector is made of durable plastic and metal, tin plating, internal pure copper to increase the conductivity, the surface....
  • Package: This set include single row connector 1/2/3/4/5/6/7/8 total 170pcs and double row 2/3/4/5/6/7/8 connector total 70pcs, male / female pin....
  • Feature: This set of connector is easy to install, you can just put the crimps in the tool and press them, make the crimp the insulation are all the....
  • Widely Application: Compatible with Arduino and breadboard style pin connectors and sockets, like 3d printer boards, dupont connector..
Check Stock

Glarks 635Pcs Connector Housing Male/Female Pin Connector 40 Pin 2.54mm Pitch Pin Headers and 10 Wire Rainbow Color Flat Ribbon IDC Wire Cable Compatible with Dupont Connector Assortment Kit

  • 100% Brand new high quality connector, pin headers and IDC cable compatible with dupont connector kit..
  • Package Includes: Female / Male Housing Connector, 2.54mm pin connector, 40 Pin 2.54mm Pitch Single / Right Angle Row Pin Headers, Rainbow Color Flat....
  • Material: Crimp pin connector is made of durable plastic and metal, tin plating, internal pure copper to increase the conductivity, the surface....
  • Feature: This set of connector is easy to install, you can just put the crimps in the tool and press them, make the crimp the insulation are all the....
  • Widely Application: Compatible with Arduino and breadboard style pin connectors and sockets, like 3d printer boards..
Check Stock

10 Pack 9V Battery Clip Connector, T Type Faux Leather Long Cable Housing Connection

  • Proper design: these 9 Volt battery clip connectors are designed simply with bare ends, which is convenient to install to replace a broken battery connector on your electronic device without applying wire strippers.
  • Application: you can apply these connector clips for power supplies or other devices.
  • They also can serve for DIY battery holders with the same battery clip connectors, and great for LED strip lights or Arduino.
  • Good material: the battery connectors adopt sturdy plastic housing and metal material, which plays a useful protective role, and allows the item not to break easily.
  • Simple operation: compact size, ideal replacements for replacing your old or damaged ones..
  • Package: includes totally 10 pack 9 Volt battery clip connector buckles.
Check Stock