Top Assembly Shaft

Coleman Cooler Drain Plug for 50, 58 and 82 Qt Xtreme Coolers - 1.5" Shaft Length

  • Made by Coleman. Compatible with the 50, 58 and 82 Quart Coleman Xtreme Coolers..
  • The drain plug assembly consists of the following components: Cap, main shaft, and rubber gasket..
  • Shaft length: 1-1/2". Shaft diameter: 3/4"..
  • Double check your cooler's drain plug hole size and cooler wall thickness. This is not a universal drain plug for Coleman coolers, as there are other sizes available..
Check Stock

labwork Rear Axle Kit Brake Hub Disc Rotor T8F Chain Sproket Replacement for Go Kart Drift Trike Cart

  • This is a high class and durable live axle kit, perfect for DIY rebuild go kart quad, trikes or drift bikes.
  • Fits 6 inch wheels (rim) with 3 bolt pattern and 3 inch bolt to bolt space.
  • Shaft overall length: 740mm (29 1/8 inch), the thickest part of the shaft is 22mm.
  • For more size information, refer to the second image.
  • Package includes: (1) Axle Assembly, (1) Brake Master Cylinder Caliper Assembly, (1) Chain Sprocket, (1) Brake Disc, (2) Pillow Block.
Check Stock

TDPRO Rear Axle Shaft Kit with 6 Wheels Tires Rims Brake Assembly and Chain & Sprocket for Go Kart Quad Trike Drift Bikes

  • This is a high class and durable live axle kit has almost all the rear-end parts you need.
  • Perfect for DIY rebuild go kart quad, trikes or drift bikes.
  • Shaft overall length: 740mm (29 1/8 inch), the thickest part of the shaft is 22mm.
  • Tubeless wheel spec: 14 1/8" Tall & 5 1/4" wide, with 145/70-6 tire, 6" rim.
  • Package includes: (1) Axle Assembly, (2) Wheels (with tire, rim, tube), (1) T8F Chian, (1) Brake Master Cylinder Caliper Assembly, (1) Sprocket, (1)....
Check Stock

4 Wheel Trolley Assembly, Stable Welded Roller Trolley for 1-5/8' Wide and All 1-5/8' or Taller Strut Channel (4)

  • Heavy Duty Build: Our roller trolley assembly is made using highs strength solid steel that’s impact resistant and zinc galvanized to offer protection against rust and corrosion. It features a solid bearing steel pin shaft in the strut channel as well.
  • Secure And Stable Performance: The four bearing trolley assembly features a welded bearing and pin shaft to offer more stability for secure use. It uses deep groove ball bearings to make sure you can operate it smoothly without making any noise.
  • For Long Term Use: Each pack comes with 2 beam trolleys that offer just the right balance of quality, durability, and performance. They offer low noise operation as well as being galvanized to provide smooth opening/closing even in the long term.
  • Versatile And Multi-Purpose: Each 4 wheel trolley assembly offers 450 lbs weight support and is suitable for use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel. It has a Diameter Hole of 9/16" (14mm) and 1/4" (6mm) Thickness.
  • We Have Your Back: If you have any issues with the trolley assembly 4 wheel then just let us know and we will help you resolve them quickly to ensure you are completely satisfied. Please Note: It’s recommended that you use the strut channel horizontally.
Check Stock

The ROP Shop Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (1) Idler Hub with Lug Nuts, (1) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (2) Inner/Outer Bearings, (1) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (1) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

WPHMOTO Rear Axle Shaft Kit with 6 Tubeless Wheels Tires Rims Brake Assembly and Chain & Sprocket for Go Kart Quad Trike Drift Bikes

  • This is a high class and durable live axle kit has almost all the rear-end parts you need.
  • Perfect for DIY rebuild go kart quad, trikes or drift bikes.
  • Shaft overall length: 740mm (29 1/8 inch), the thickest part of the shaft is 22mm.
  • Tubeless wheel spec: 14 3/4" Tall & 5 1/2" wide, come with 145/70-6 tire, 6" rim.
  • Package includes: (1) Axle Assembly, (2) Wheels (with tire, rim), (1) T8F Chian, (1) Brake Master Cylinder Caliper Assembly, (1) Sprocket, (1) Brake....
Check Stock

Float Plan

  • Capacity: 4 Adults or 1200 lbs. Exterior: 10' x 5' Assembly time: 15 min..
  • Engine Capacity: 4 hp gas (15 (15" shaft minimum, 45 lbs. Max weight) or up to 74 lb. Thrust Electric (min 30" shaft, 45 lbs. Max weight).
  • Material: 1000 Denier 36 mil Floor: 1000 Denier Reinforced.
  • Speed Estimates: 5-6 mph w/Gas, 4-5 mph w/Electric.
  • Weight: 45 lbs (hull only), 78 lbs (w/ floorboards & motormount).
Check Stock

The Crew - PlayStation 4

  • Capacity: 4 Adults or 1200 lbs. Exterior: 10' x 5' Assembly time: 15 min..
  • Engine Capacity: 4 hp gas (15 (15" shaft minimum, 45 lbs. Max weight) or up to 74 lb. Thrust Electric (min 30" shaft, 45 lbs. Max weight).
  • Material: 1000 Denier 36 mil Floor: 1000 Denier Reinforced.
  • Speed Estimates: 5-6 mph w/Gas, 4-5 mph w/Electric.
  • Weight: 45 lbs (hull only), 78 lbs (w/ floorboards & motormount).
Check Stock

Summerwave Rotor PIN for Model SFX1000 X1000 Repair - Ceramic Shaft

  • Replacement Impeller Shaft Assembly for SFX1000, X1000 PUMP.
Check Stock

NEW OEM Produced for Electrolux Frigidaire Whirlpool 519306005 241577505 Refrigerator Inverter Control Board by OEM Mania Replacement Part - 1 YEAR WARRANTY

  • 【W10324647 Tub Seal】1PCS Washer Tub Seal Assembly W10324647. Tub seal assembly W10324647 prevents water from leaking around the drive shaft that goes through the bottom of the washer tub..
  • 【Tub Seal W10324647 Replace】 W10006371,1877231,W10324647,AP4567772,PS3407958,EAP3407958,AH3407958,EA3407958.
  • 【W10324647 Mode Reference】 MVWC415EW1,11020022010,11020022011,11020022012,11020022013,11020022014,7EWTW1300YM0,7EWTW1409YM0,7EWTW1515YW0,7EWTW1715YW0,7MKTWS300DW0,7MKTWS400DW0.
  • 【W10324647 Repair & Advice】 1.Removed top outer tub liner and agitator, next removed tub. 2.Removed drive belt and motor disconnected wire harness from motor, capacitor and pump. 3.Removed agitator gears, transmission assembly,old tub seal. 4.Cleaned area for seal. Applied gre ase to new seal. Insert new seal. Reverse above steps..
  • 【Repair Solution for Washing Machine Tub Seal】 Leaking water, not washing properly, unusual noises, shaking and moving,Tub leaked ruined bearing,Louder than normal in spin cycle,Leaking under tub next to shaft spline..
Check Stock

VEVOR PTO Shaft 1-3/8 PTO Drive Shaft 6 Spline Both Ends PTO Driveline Shaft Series 5 Tractor PTO Shaft 43 -57 Brush Hog PTO Shaft Black PTO Shaft w/Slip Clutch for Bush Hog/Finish Mower

  • Sturdy and Durable: This PTO shaft is a well-forged series5 driveline shaft with CE certification. It consists of a slip clutch, a solid 20CrMnTi....
  • 6 Spline Ends: Tractor end: 1-3/8" x 6 Spline.
  • implement end: 1-3/8" x 6 Spline. Our brush hog PTO shaft matches perfectly with the same size and type....
  • Adjustable Length: Compressed Length: 43".
  • Extended Overall Length: 57". The tiller PTO shaft is designed with a telescoping steel tube, a universal....
  • Easy Assembly ＆ Safer Use: As a high-efficient power transmission tool, our PTO extender shaft can be easily assembled for direct replacement. The....
  • Wide Application: The PTO (Power Take-Off) shaft transfers the power from the tractor to the PTO powered attachment. It is widely used on mowers,....
Check Stock

WPHMOTO Go Kart Rear Axle Assembly Complete Wheel Hub Kit & Tires With Rim & Brake Assembly & T8F Chain for Quad Trike Drift Bikes

  • This is a high class and durable live axle kit has almost all the rear-end parts you need.
  • Perfect for DIY rebuild go kart quad, trikes or drift bikes.
  • Shaft overall length: 740mm (29 1/8 inch), the thickest part of the shaft is 22mm.
  • Tubeless wheel spec: 14 1/8" Tall & 5 1/4" wide, with 145/70-6 tire, 6" rim.
  • Package includes: (1) Axle Assembly, (2) Wheels (with tire, rim, tube), (1) T8F Chian, (1) Brake Master Cylinder Caliper Assembly, (1) Sprocket, (1)....
Check Stock