Top Astm A694 F46

Soundsulate Acoustical Ceiling Tile Sound Barrier, Foil Faced Mass Loaded Vinyl Soundproofing with 1″ Duct Liner Decoupler, 16″ X 30″

  • Combines 1lb/sf, 1/8″ thick foil-faced mass loaded vinyl with a 1″ thick Bonded Glass Fiber Blanket Decoupler..
  • Use as a ceiling tile noise barrier or anywhere that you would install fiberglass insulation and require sound control.
  • Significantly higher performance than 1 LB MLV. Excellent thermal and acoustical performance, STC rating of 29, R-Value: 4.1.
  • Fire Rating: Class 1 or A per ASTM E84, ASTM C1338-00, ASTM CM411-05, ASTM C665, ASTM C795, ASTM 1304 and UL723.
  • Sold in lots of ten 16″ x 30″ pieces.
Check Stock

Rexka 50pcs Front Shield Bumper Cover Rocker Molding Rivet Headliner Retainer for BMW 1 2 3 5 7 Series 51111908077 E30 E36 E46 E34 E39 E32 E38 E31 X3 X4 X5 X6 Z4

  • Other Names: Package Tray Rivet, Upper Quarter Trim Rivet, Vent Grille Rivet, Housing Cover Retainer, Hood Bumper Rivet, Side Duct Rivet, Air Duct Rivet, Front Cover Rivet, License Bracket Rivet, Housing Cover Rivet, Front Trim Rivet, Insulation Rivet, Lower Deflector Rivet, Upper Center Pillar Trim Rivet, Cover Rivet, Frame Molding Rivet, Stone Guard Rivet, Upper Bracket Rivet,Lower Cover Rivet, Face Bar Rivet, Lower Trim Panel Rivet, Expanding Rivet 889520.
  • Positions:Left Rear, Left Upper, Left Front, Left Lower, Right Rear, Right Upper, Right Front, Right Lower.
  • Replaces BMW: 51-11-1-908-077,51110029491, 51114404955 Series 1,3, 4,5, 6 & 7 ,X1,X2,X3, X4,X5,X6,Z4 1984 -.
  • Fits BMW E30 E31 E32 E34 E36 E38 E39 E46 E52 E53 E60 E61 E63 E64 E65 E66 E67 E70 E71 E72 E81 E82 E83 E84 E86 E87 E88 E89 E90 E91 E92 E93 F01 F02 F03 F04 F06 F07 F10 F11 F12 F13 F15 F16 F20 F21 F22 F23 F25 F26 F30 F31 F32 F33 F34 F36 F39 F45 F46 F48 F80 F82 F83 F87 F90 G01 G02 G05 G11 G12 G15 G20 G29 G30 G31 G32 I01 I12 I15.
  • Black Nylon,Head Diameter: 15mm Stem Length: 15mm Fits Into 6.3mm Hole.
Check Stock

Motul 105776 Set of 4 Dexron III Automatic Transmission Fluid 1-Liter Bottles

  • For use in all systems where DEXRON or MERCON standard is required. // For automatic gearboxes/torque converters/power steering systems/boat reversing gears/hydrostatic transmissions/hydraulic or mechanical systems that require DEXRON or MERCON standards..
  • MOTUL DEXRON III can be used (and mixed) for applications where DEXRON/B DEXRON/DEXRON II D/DEXRON IIE/DEXRON III is required..
  • Technosynthese ATF features more fluid at low temperature than Dexron IIE oils, which allows easier gear change in cold weather..
  • Higher oxidation resistance than Dexron IIE standard. // Oil film stability under high temperature. // Anti-wear, Anti-corrosion, Anti-foam..
  • Color: Red. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/33.4 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/7.2 mm²/s. // Viscosity Index: ASTM D2270. // Flash Point: ASTM D92/204°C/399°F. // Pour Point: ASTM D97/-48°C/-54°F..
Check Stock

New Balance Men s Slip-Resistant 412 V1 Alloy Toe Industrial Shoe Team Navy/Team Orange 11

  • Slip-resistant outsole tested according to ASTM F2913-18 to provide superior traction under various surface conditions.
  • Wide flanged alloy toe cap provides added protection for people who work in hazardous work environments. Meets ASTM F2412-18 & ASTM F2413-18 I/75 and....
  • Meets ASTM F2412-18 and ASTM F2413-18 Electrostatic Dissipative performance requirements that displace charges of electricity through a walking....
  • Upper features no-sew construction for a sleek fit and feel.
  • Adjustable lace closure for a customized fit.
Check Stock

New Balance mens 412 V1 Esd Industrial Shoe, Team Navy/Team Orange, 11.5 Wide US

  • Slip-resistant outsole tested according to ASTM F2913-18 to provide superior traction under various surface conditions.
  • Wide flanged alloy toe cap provides added protection for people who work in hazardous work environments. Meets ASTM F2412-18 & ASTM F2413-18 I/75 and C/75 impact and compression safety standards.
  • Meets ASTM F2412-18 and ASTM F2413-18 Electrostatic Dissipative performance requirements that displace charges of electricity through a walking surface thus reducing static electricity hazards.
  • Upper features no-sew construction for a sleek fit and feel.
  • Adjustable lace closure for a customized fit.
Check Stock

Two-Component Polyurethane Foam Kit 200 Board Feet

  • Theoretically yields 200 board feet or 200 square feet using a 1" layer (1 board foot = 12" x 12" x 1"), 16.6 cubic feet.
  • Portable, disposable, self-contained units, Fast set-up, Clear, color-coded hoses.
  • High closed cell content of cured foam makes it suitable as a general sealant to prevent air leakage in cold storage and other insulating applications.
  • No CFCs or urea formaldehyde, R-Value (ASTM C-518): 5.48 per inch, Density (ASTM D-1622): 1.75 +/- 0.2 pcf, K-Factor (ASTM C-518): 0.14 BTU/in/hr^-1/ft^-1/F^-1, Tensile Strength (ASTM D-1623): 30 psi, Closed Cell Content (ASTM D-2856): 90% minimum.
  • Up to 18 Month Shelf Life, Use All Contents Within 30 Days of Initial Dispensing. Kit includes: A & B cylinders, P2 applicator gun with 10 ft hoses, extra spray nozzles, assembly wrench, latex gloves, lubricant and trilingual illustrated instructions (English, Spanish, French).
Check Stock

1/2\ Od X 2 Ft. Straight Copper Tubing Type K Kh03002

  • Copper Tube Shape Straight, Hard, Application Water, Copper Tube Coating None, Temp. Range 100 Degrees F to 400 Degrees F.
  • Standards ASTM B280, ASTM B306, ASTM B819, ASTM B88.
  • Max. Pressure 1130 psi, Tube Length 2 ft, Copper Tube Type Type K.
  • Tube Size 3/8 in, Inside Dia. 0.375 in, Outside Dia. 1/2 in, Wall Thickness 0.049 in.
Check Stock

New Balance womens Composite Toe 589 V1 Industrial Shoe Gray/Pink 7 Wide US

  • Slip-resistant outsole properties are tested according to ASTM F2913-17 to provide superior traction under various surface conditions.
  • Meets ASTM F2413-17 I/75 and C/75 impact and compression safety standards.
  • Meets ASTM 2413-17 and ASTM 2892-11 electrical hazard standards to provide secondary underfoot protection against the hazards of stepping on live....
  • REVlite midsole delivers incredibly lightweight cushioning.
Check Stock

Thorogood 804-6191 Men's Deuce Series 8' Waterproof Side-Zip Composite Safety Toe Tactical Boot, Black - 11.5 XW

  • Removable SHOCK ZONE polyurethane footbed.
Check Stock

Nike Men's Air Zoom Pegasus 36 Running Shoe Phantom/Electric Green/Moon Particle/Ridgerock 12

  • Anti-Fatigue Technology: A comfort system designed with shock-absorbing, geometrical technology that returns energy back to the foot to deliver all-day support and comfort..
  • Alloy Safety Toe: Lightweight, asymmetrical-shaped toe cap. Meets US and Canadian safety standards including ASTM F2412-18a and ASTM F2413-18 I and C impact and compression safety standards and CAN/CSA-Z195-14 Grade 1..
  • Electrical Hazard Protection: Provides secondary underfoot protection against live electrical circuits, electrically energized conductors, parts or apparatus. Meets ASTM F2412-18a, ASTM F2413-18, ASTM F2892-18 and CAN/CSA-Z195-14 standards..
  • Polyurethane Outsole: Lightweight and rugged outsoles provide cushioning, plus slip, oil and abrasion resistance..
  • ReBOTL Material: Products with ReBOTL material contain at least 50% recycled PET (recycled polyethylene terephthalate, the stuff plastic bottles are made of) excepting trace materials..
Check Stock

KEEN Utility Men's Dover 6" Composite Toe Waterproof Work Boot, Magnet/Black, 15 Medium US

  • CARBON FIBER TOE: Asymmetrical, non-metallic carbon fiber toes are lighter than steel, warmer, comfortable and provide heavy-duty protection.
  • WATERPROOF LEATHER: Genuine leather construction with KEEN. DRY waterproof, breathable membrane.
  • Cleansport NXT Technology for natural odor protection.
  • COMFORT MIDSOLE: KEEN Luftcell dual-density PU midsole is injected with air for extra comfort and lightness.
  • TPU shank for extra support in the midfoot.
  • SECURE DESIGN: KONNECTFIT heel-capture system provides a locked-in fit.
  • 90-degree heel for stability while climbing ladders.
  • Oil- and slip-resistant non-marking rubber outsole.
  • SAFETY STANDARDS: Midsole meets ASTM D471-06 903 Chemical Resistance Standards.
  • Outsole meets ASTM F2913 SATRA and ASTM F1677-96 Mark II Non-slip Testing Standards.
  • Safety toe meets ASTM F2412 and F2413 EH Standards.
Check Stock

Timberland PRO Men's Powertrain Sport Alloy Safety Toe Electrical Hazard Athletic Work Shoe, Black Synthetic, 12

  • Anti-Fatigue Technology: A comfort system designed with shock-absorbing, geometrical technology that returns energy back to the foot to deliver all-day support and comfort..
  • Alloy Safety Toe: Lightweight, asymmetrical-shaped toe cap. Meets US and Canadian safety standards including ASTM F2412-18a and ASTM F2413-18 I and C impact and compression safety standards and CAN/CSA-Z195-14 Grade 1..
  • Electrical Hazard Protection: Provides secondary underfoot protection against live electrical circuits, electrically energized conductors, parts or apparatus. Meets ASTM F2412-18a, ASTM F2413-18, ASTM F2892-18 and CAN/CSA-Z195-14 standards..
  • Polyurethane Outsole: Lightweight and rugged outsoles provide cushioning, plus slip, oil and abrasion resistance..
  • ReBOTL Material: Products with ReBOTL material contain at least 50% recycled PET (recycled polyethylene terephthalate, the stuff plastic bottles are made of) excepting trace materials..
Check Stock