Top Asus B35itx

anidees AI Crystal Cube AR V3 Dual Chamber Tempered Glass EATX/ATX PC Gaming Computer Case, Water-Cooling Ready, Steel Structure, w/ 5 RGB PWM Fans / 2 LED Strips - Black AI-CL-Cube-AR3

• Cube ATX PC Case with Dual Chamber design for better airflow and cable management..
• 5mm Tempered Glass side and front panel , 70% transmittance to show off the system on the side panel , USB2.0x 2, USB3.0x2.
• Motherboard Support E-AT, ATX, m-ATX, mini-ITX , Support Vertical Graphic card. Removable Dust filters in the front, top and bottom included.
• Radiator Support 240/280 mm in the top and front side. Graphic Card Length Max Support 330 mm /13 inches , CPU Cooler Max height 168mm / 6.6 inches.
• Easy to use : the fan hub allow you to control the fan speed and LED mode by remote control or connect to the motherboard, control the fan speed by PWM and light by ASUS Aura Sync (ARGB) , MSI Mystic Light Sync (J-Rainbow) and GIGABYTE RGB Fusion / Fusion 2.0 (5V addressable 3pins header on motherboard)..

DC 12V 150 watt Pico PSU ATX High Mini-ITX Power Supply with Adapter Board ATX Switch PSU Car Auto for Computer Mainboard and car/Motorcycle

• 150 watt Pico PSU ATX High Mini-ITX Power Supply with adapter board.
• The mini-itx power supply Short-circuit protection: output shut down when short-circuit,.
• Pico power supply input connector: 2.5mm inner diameters, 5.5mm outer diameter.
• The atx power supply with 24 pin ATX connector, Plugs directly into the ATX connector,pico psu with adapter.
• Perfect DC PSU for mini ITX Motherboards.

DIY ITX MATX ATX Computer Open Air Case, Aluminum Open Frame Computer Case, PC Test Bench Vertical Motherboard Chassis DIY Kit(Blue Black)

• Excellent Heat Dissipation: The open chassis design is completely exposed for heat dissipation, freeing up the internal space of the chassis..
• Open Frame Computer Case: The split hardware structure is adopted, and the open structure provides you with a large internal installation space..
• DIY ITX MATX ATX Computer Case: Bare block frame, easy to disassemble, easy to assemble, stackable, fully experience the fun of DIY..
• ATX/M-ATX/ITX Motherboard Case: Support ATX, M ATX, ITX motherboard, power supply supports ATX ordinary large power supply, support expansion of 1 x 3.5, 1 x 2.5 inch hard disk storage, support 7 PCI expansion slots..
• Aluminum PC Open Air Case: Made of aluminum, it is strong, durable, stable in use and has a long service life..

Aluminum Mini ITX Case with PCI Riser JOYJOM Mini PC Case SFF Small Form Factor PC Case TX Computer Gaming Case Supports GPU Graphics Card Black

• 【Ultra Mini ITX Case with PCI 3.0 Riser】The Case is only 4.3L capacity, the size is 18.4x10.4x22.3 cm (7.3x4.1x8.8 inch), PCI 3.0 Riser Cable is 18.5cm.
• 【Compatibility Accessories】Support Standard ITX Motherboard(17x17cm), FLEX-Small 1U Power Supply (15*4*8cm), Graphics Card (17*10*4cm), Hard Disk(2x2.5inch SSD, thickness less than 9mm), CPU Cooler(Less than 36mm).
• 【High-quality Material】The Body of Case is made of 2.0mm Aluminum Alloy, which has good heatsink performance anf beautiful appearance.
• 【Packing Include】1* Mini ITX Case, 1*PCI 3.0 Riser and some Screws ONLY.

ASROCK AMD X470 Chip Set Mini – ITX Motherboard Fatal1ty X470 Gaming – ITX/AC

S300 - Mini-ITX PC Gaming Case - Front I/O USB 3.0 Type - C Port - SFX Power Supply 100-130mm -Cable Management System - luminum Mini-ITX Motherboard Small Portable PC Case PCIe 3.0 16X Riser Cable

• Size: 12.2 x 5.3 x 7.6 in, 8.1L Portable Handheld Minni Itx Case..
• New features: Front I/O USB3.0 Type-C Port and using pure aluminum wire drawing material, small leather handle on the top..
• MESH Panels: Three-sided MESH panels, Effectively improve the performance of hot and cold air exchange..
• Support SFX power supply: Support 100-130mm SFX/SFX-L power supply,the height limit of CPU fan is 60mm..
• ITX motherboard: 170*170mm specification standard ITX motherboard..

IN-WIN 150W Mini-ITX Slim Case Black BQ656T.AD150TB3

• Chassis: Mini-ITX s.F.F slim chassis (Ultra small form Factor).
• Power supply: 150W internal PSU (ip-ad150a7-2).

Inwin Development BP655FH300TB3 Haswell MiniITX Chassis BP655 Cases BP655.FH300TB3, Black

• Design that delivers high availability, scalability, and for maximum flexibility and price/performance.

HYTE Revolt 3 Small Form Factor Premium ITX Computer Gaming Case Only Black

• The HYTE Revolt 3 ITX Case is a small form factor case with user friendly design, high degree of compatibility and carrying handle for portability at....
• Compatible with any standard layout ITX form factor motherboard.
• Easily removable external panels on all sides of the case give users 360-degree accessibility to components and wiring.
• Features 2x USB 3.2 Gen 1 Type-A ports, a headset combo jack, and USB 3.2 Gen 2 Type-C port..

Thermaltake Level 20 RS Motherboard Sync ARGB ATX Mid Tower Gaming Computer Case with 2 200mm ARGB 5V Motherboard Sync RGB Fans + 140mm Black Rear Fan Pre-Installed CA-1P8-00M1WN-00

• [LIGHT UP THE SYSTEM] - 2 Pre-installed 200mm 5V Motherboard Sync ARGB fans + ARGB light bar at front panel (Sync with Asus Gigabyte MSI ASRock Biostar that has 5V addressable RGB header).
• [BUILT-IN DUAL MODE 5V ARGB SWITCH BOARD] - Control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard RBG software.
• [27 LED MODES via I/O PORT] - Wave mode/ Flow mode/ RGB lighting (single color)/ Radar mode (Red yellow green Cyan blue White Purple)/ Breath mode (8 Colors)/ Full Lighted mode/ Single Color mode (7 Colors)/ Light Off.
• [PATENTED ROTATIONAL PCI-E 8 SLOTS DESIGN] - With patented rotational PCI-E slots you can choose the way you want to display graphic cards vertically or horizontally.
• [WINDOW PSU COVER] – Special ventilated design enhances airflow and hides unsightly cables.
• [2+2+1 DRIVE BAY] - 2 5"/3 5" x 2 with HDD Rack + 2 5" x 2 with HDD Bracket + 2 5"/3 5" x 1 behind MB Tray.
• Supports Mini ITX Micro ATX ATX Motherboard.
• I/O Port - USB 3 0 x 2 USB 2 0 x 2 HD Audio x 1 RGB Switch x 1.
• OUTSTANDING EXPANSION - Max CPU Cooler Height 172mm / Max VGA Length 282mm (With Reservoir) 400mm (Without Reservoir) / Max PSU Length 220mm.
• DIMENSION - 21 8" x 9 5" x 20 6" 27 lbs 3 Year.

Thermaltake View 51 Motherboard Sync ARGB E-ATX Full Tower Gaming Computer Case with 2 200mm ARGB 5V Motherboard Sync RGB Fans + 140mm Black Rear Fan Pre-Installed CA-1Q6-00M1WN-00

• [LIGHT UP THE SYSTEM] - 2 Pre-installed 200mm 5V Motherboard Sync ARGB fans plus ARGB light bar at front panel (Sync with Asus Gigabyte MSI ASRock Biostar that has 5V addressable RGB header).
• [BUILT-IN DUAL MODE 5V ARGB SWITCH BOARD] - Control light via the I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard RBG software.
• [27 LED MODES via I/O PORT] - Wave mode/ Flow mode/ RGB lighting (single color) / Radar mode (Red, yellow green Cyan blue White Purple) / Breath mode (8 Colors) / Full Lighted mode/ Single Color mode (7 Colors) / Light Off.
• [PATENTED ROTATIONAL PCI-E 8 SLOTS DESIGN] - With patented rotational PCI-E slots you can choose the way you want to display graphic cards vertically or horizontally.
• [SMART SPACE] – Sophisticated space design at the right side of the case provides a neat area for PSU placement and cable management.
• [2 plus 2 DRIVE BAY] - 2 5"/3 5" x 2 with HDD Cage plus 2 5" x 2 with HDD Bracket.
• Supports Mini ITX Micro ATX ATX E-ATX (up to 10 5") Motherboard.
• I/O Port - Type C x 1 USB 3 0 x 2 USB 2 0 x 2 HD Audio x 1 RGB Switch x 1.
• OUTSTANDING EXPANSION - Max CPU Cooler Height 175mm / Max VGA Length 300mm (With Reservoir) 440mm (Without Reservoir) / Max PSU Length 200mm.
• DIMENSION - 21 65" x 12 4" x 20 67" 32 96 l....

Thermaltake View 51 Snow Motherboard Sync ARGB E-ATX Full Tower Gaming Computer Case with 2 200mm ARGB 5V Motherboard Sync RGB Fans + 140mm Black Rear Fan Pre-Installed CA-1Q6-00M6WN-00, White

• [LIGHT UP THE SYSTEM] - 2 Pre-installed 200mm 5V Motherboard Sync ARGB fans plus ARGB light bar at front panel (Sync with Asus Gigabyte MSI ASRock Biostar that has 5V addressable RGB header).
• [BUILT-IN DUAL MODE 5V ARGB SWITCH BOARD] - Control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard RBG software.
• [27 LED MODES via I/O PORT] - Wave mode/ Flow mode/ RGB lighting (single color)/ Radar mode (Red yellow green Cyan blue White Purple)/ Breath mode (8 Colors)/ Full Lighted mode/ Single Color mode (7 Colors)/ Light Off.
• [PATENTED ROTATIONAL PCI-E 8 SLOTS DESIGN] - With patented rotational PCI-E slots you can choose the way you want to display graphic cards vertically or horizontally.
• [SMART SPACE] – Sophisticated space design at the right side of the case provides a neat area for PSU placement and cable management.
• [2 plus 2 DRIVE BAY] - 2 5"/3 5" x 2 with HDD Cage plus 2 5" x 2 with HDD Bracket.
• Supports Mini ITX Micro ATX ATX E-ATX (up to 10 5") Motherboard.
• I/O Port - Type C x 1 USB 3 0 x 2 USB 2 0 x 2 HD Audio x 1 RGB Switch x 1.
• OUTSTANDING EXPANSION - Max CPU Cooler Height 175mm / Max VGA Length 300mm (With Reservoir) 440mm (Without Reservoir) / Max PSU Length 200mm.
• DIMENSION - 21 65" x 12 4" x 20 67" 32 96 lbs 3 Year....