Top At Poe Switch

Engenius - Switch - 8 Ports - Managed - Desktop (EGS5212FP)

  • 8 Gigabit PoE+ Ports, IEEE802.3at/af support.
  • 2 Gigabit uplink Ports and 2 SFP Slots for additional connectivity.
  • Internal power supply with 130 w PoE budget.
  • IGMP and MLD snooping provides advanced multicast filtering.
  • 2 Gigabit uplink ports and 2 SFP slots for additional connectivity.
  • Internal Power Supply with 130 W PoE Budget.
  • A full-featured Layer 2 PoE+ Switch (Qu's, IGMP/MLD Snooping, STP/RSTP/MSTP, Link Aggregation Control Protocol (LACP), SNMP v1/v2c/v3, and more).
  • Easy to manage and configure via a Web-based Graphical User Interface (GUI).
  • Up to 24 Gbps non-blocking switching capacity.
Check Stock

4 Port in-Wall Gigabit PoE Extender with IEEE 802.3bt Uplink - Power Over Ethernet Switch Wall Plate with Full Passthrough VLAN Computer Network IP Camera Feed Internet Office VoIP

  • 4 PoE+ ports on one network cable run. 60 Watt max PoE+ switch powers up to four IEEE 802.3af or two 802.3at IP phones, WiFi access points, or other low voltage devices over 600 feet from the PoE source..
  • An in-wall PoE passthrough switch opens up opportunities. Our 4 port PoE switch lets you add devices and capacity anywhere on your network, without the cost of adding extra lines and expensive infrastructure..
  • Wall mount PoE switch fits flush to wall boxes for a clean, stylish install. Install this power over ethernet switch into any standard electrical wall box for complete integration into your home or office..
  • Mount the PoE extender in any remote office, dorm room, or hotel room. Functions as a network switch for office VoIP phone systems, multiple live IP camera feeds, and anywhere that needs a little extra power and network capacity..
  • Covered by an industry leading 1-year manufacturers warranty and lifetime technical support with a PoE Texas expert. Please email or call 512 479 0317.
Check Stock

LoveRPi Power-Over-Ethernet (PoE) HAT Kit for Raspberry Pi 3 Model B+ with Black Case

  • ...MicroUSB plug altogether! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters..
  • BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 3 Model B+ boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market..
  • POWER OVER ETHERNET SWITCH REQUIRED: Network switch must be compliant with IEEE 802.3af PoE standard. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 3 Model B+ sold separately..
  • ANODIZED HEATSINK AND VENTILATED CASE WITH COOLING FAN INCLUDED: Raspberry Pi 3 Model B+ gets very hot and active cooling is the only way to prevent temperatures from exceeding 150°F! This kit includes everything you need to keep your PoE powered board operating at maximum performance. Raspberry Pi 3 Model B+ sold separately!.
  • NOT COMPATIBLE WITH RASPBERRY PI 4 OR RASPBERRY PI 3 MODEL B AND OLDER MODELS: Previous Raspberry Pi boards do not feature the onboard PoE header and will not be compatible with this device! Raspberry Pi 4 requires the n....
Check Stock

TRENDnet 6-Port Fast Ethernet PoE+ Switch, 4 x Fast Ethernet PoE Ports, 2 x Fast Ethernet Ports, 60W PoE Budget, 1.2 Gbps Switch Capacity, Metal, Lifetime Protection, Black, TPE-S50

  • ETHERNET PORT INTERFACE 4 x Fast Ethernet PoE+ ports and 2 x Fast Ethernet ports.
  • POE POWER BUDGET & SWITCH CAPACITY: This PoE+ switch supports both PoE (802.3af) and PoE+ (802.3at) devices with a 60 W PoE power budget that delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as access points, VoIP phones, and IP Cameras. The 6-port fast Ethernet PoE+ network switch provides 1.2 Gbps switching capacity to support edge network installations..
  • COMPACT FANLESS DESIGN With a compact and lightweight rugged metal housing design this desktop switch is well-suited for desktop installations Its fanless design is ideal for quiet environments that require silent operation.
  • DATA TRANSFER RATE Ethernet 10 Mbps (half duplex) 20 Mbps (full duplex) Fast Ethernet 100 Mbps (half duplex) 200 Mbps (full duplex).
  • OPERATING TEMPERATURE This 6-port fast Ethernet PoE+ network switch is rated with an operating temperature range of 0 – 40 °C (32 - 104 °F).
  • TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches are backed by our lifetime TRENDnet Manufacturer Protection. Renewed or refurbished products come with a 90 day Amazon Renewed Guarantee..
Check Stock

Aumox 5 Port Gigabit PoE Switch, 4 Port PoE 78W, Gigabit Ethernet Unmanaged Network Switch, Sturdy Metal Housing, Plug and Play, Traffic Optimization (SG305P)

  • 【4-Port 78W PoE】Designed with IEEE802.3af/at standard, Aumox PoE ethernet switch can transmit network data and power at the same time. This gigabit switch offers a maximum 78W PoE power output in total. Single-port POE power up to 30W, meets power supply requirements of various applications..
  • 【Gigabit Ethernet】Aumox network switch features 100/1000 Mbps ports, enables ultra-fast wired connectivity and instant large files transferring. Unmanaged gigabit switch, easy to setup, plug and play..
  • 【Reliable Fanless Metal Housing】Metal housing design makes the PoE switch reliable to use in different use cases. Fanless design give you a quiet and noise free environment..
  • 【One-Key VLAN】Supports one-key VLAN mode, and ports are isolated from each other. Effectively suppress network faults such as network storms, ensuring good network transmission performance and security..
  • 【Intelligent Recognition】Intelligently identify whether the IP terminal supports power supply,protect powered device..
Check Stock

Loocam PoE Switch 4 Port, 5 Port Gigabit PoE Switch – 4 Port PoE+ @ 65W and 1 Uplink Port, Unmanaged Ethernet Network Switch PoE, Plug and Play

  • Full Gigabit 5 Port PoE Switch: Unmanned PoE switch with 4 10/100/1000 Mbps RJ45 PoE+ ports and 1 Gigabit Ethernet Uplink port, 4 PoE+ ports providing up to 30W per port, total PoE power budget 65W(Include 48V 1.35A external power supply).
  • Power Over Ethernet, Plug And Play: Compliant with IEEE 802.3af/at POE standard, this gigabit unmanaged poe switch 4 port can automatically detect and identify PD devices that comply with the standard and supply them with power through the network cable. Plug and play, easy setup with no software configuration required. It can meet the POE power supply requirements of security monitoring, teleconferencing systems, wireless coverage and other scenarios..
  • 300 Meters Extend Transmission: Automatically detect the transmission distance and adjust the transmission rate, extend up to 300m(980ft) data and power PoE transmission range (Speed will drop to 10 Mbps). For better result over long distances transmission, use cat5e cables or above..
  • PoE Auto Recovery: This 4 port gigabit poe switch equipped with professional poe chip, it can intelligently detect the data exchange between the poe port and the terminal device. When an abnormality is detected, it will automatically restart and return to normal without affecting other po....
Check Stock

Tripp Lite Gigabit PoE+ Midspan Active Injector - IEEE 802.3at / 802.3af, 30W, 1 Port, Power Over Ethernet (NPOE-30W-1G),black

  • ADDS POE DEVICES TO YOUR LAN WITHOUT A POE SWITCH: PoE+ injector uses existing Cat5e/6/6a cable to supply power to a PoE device connected to a non-PoE switch..
  • EXPAND YOUR WIRELESS NETWORK: The NPOE-30W-1G delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away..
  • SAVES YOU TIME AND MONEY: This compact PoE plus injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don’t need to install new AC power lines and electrical outlets..
  • SIMPLE PLUG-AND-PLAY: Quick and easy plug-and-play installation with no configuration necessary. Compact, hand-sized plastic housing ready for mounting on any smooth surface..
Check Stock

Ubiquiti Switch Enterprise 8 PoE | 8-Port Managed Layer 3 Multi-Gigabit PoE Switch (USW-Enterprise-8-PoE)

  • Layer 3, PoE switch with (8) 2.5GbE, 802.3at PoE+ RJ45 ports and (2) 10G SFP+ ports.
  • (1) 1.3" LCM color touchscreen with AR switch management.
Check Stock

TRENDnet 9-Port Unmanaged Fast Ethernet Long Range PoE+ Switch 8 x Fast Ethernet PoE+ And 1 x Fast Ethernet Port Extend PoE+ Up To 250m 820 ft At 10Mbps 1.8Gbps 60W Power Budget Black TE-FP091

  • DEVICE INTERFACE: 8 x Fast Ethernet PoE+ ports.
  • PoE+ POWER: This network Ethernet switch provides a 60W PoE power budget and supports up to eight Power over Ethernet devices..
  • POE TECHNOLOGY: With PoE technology, users only need one set of cables to deliver both data and power simultaneously which reduces equipment cost by....
  • FAST ETHERNET: Nine Fast Ethernet (10/100Mbps) ports provide a 1.8 Gbps switching capacity to support edge network installations..
  • LONG RANGE POE+ SWITCH: Extend your PoE+ signal up to 250m (820 ft.) at 10Mbps for long distance PoE installations by enabling the DIP switch..
Check Stock

SonicWall SWS12-8POE Network Security Switch (02-SSC-2463)

  • SonicWall SWS12-8POE Network Security Switch (02-SSC-2463).
  • The SWS12-8POE SonicWall switch delivers highspeed network switching while providing unparalleled performance and manageability. It prioritizes certain traffic on the network such as VOIP for video conferences while working from home, with features such as QoS. This switch is ideal for small and medium-sized business (SMB), and Software-Defined Branch (SD-Branch) deployments..
  • SonicWall Switch offers Zero-Touch Deployment capability with the ability to quickly roll out devices across branches spread out globally. Admins can quickly and securely deploy these switches at new locations without requiring any costly on-site IT personnel..
  • The SonicWall Secure SD-Branch solution transforms user experience at branch office locations by delivering a unified platform that enables branches to be deployed in minutes and delivers unified visibility and threat detection from a single pane of glass..
  • Hardware: Gigabit Ethernet Ports: 8 | SFP Ports: 2 | Total Interfaces: 10 | PoE version: PoE | Memory (MB): 256 | Flash (MB): 32 | Switching: 20 Gbps.
Check Stock

Samsung SL30 Digital Camera USB Cable 5 USB Data Cable - 8 Pin - Replacement by General Brand

  • Support 48V active POE switch and active POE devices,Not Support passive POE switch and Passive PoE devices..
  • AI 250 meters Extend function,Automatically identify the transmission rate, automatically extend 100 meters or 250 meters according to the terminal....
  • The PoE Extender features one 10/100Mbps PoE input port and one 10/100Mbps PoE output port. Comply with IEEE802.3at and IEEE802.3af..
  • Designed for outdoor use. The PoE Extender includes watertight connectors on the input and output ends. IP66 rating for water resistant enclosure.....
  • Plug and Play, no other settings required. No external power required. Pin Assignment Input: Both 1/2, 3/6 and 4/5, 7/8, Output: 1/2 (-), 3/6 (+)..
Check Stock

PoE Texas 24 Multi Port PoE+ Injector with 48v 240w Power Supplies - 10/100/1000 Gigabit Passive Power Over Ethernet Means Versatility - 30W PoE Injector for WiFi Access Point PTZ Camera IP Phone

  • Save big on network upgrades and installations using this 24 port gigabit midspan PoE injector. Use it to power up to 24 IP cameras, desktop phones, WiFi Access Points, or other low voltage devices through a network data cable..
  • Instantly upgrade your network gigabit switch to PoE/PoE+. No need to purchase a larger 24 port switch. You can rely on your smaller, more cost-effective PoE switch and simply add Power + Data using the 802.3at PoE injector..
  • With this passive PoE Injector, you can add power to your data cable for a fraction of the cost of upgrading to a PoE capable network switch. Passive PoE power is ‘Always On’ with power delivery on Mode B pins (-4,5 +7,8)..
  • Plug and play. Our 24 port PoE adapter / injector transmits 10/100/1000 gigabit data, delivering lightning fast wired speeds with no loss of signal quality, up to 328 feet. Input voltage range: 48-56 Volts DC. 30 Watt output per port..
  • All of our PoE power injector products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock