Top Atmega328p Nano V3

SunFounder Controller Board Compatible with Arduino UNO R3 ATMEGA328P ATMEGA16U2

  • Controller board compatible with Arduino UNO R3..
  • The board compatible with Arduino ATMEGA16U2 chip, Faster transfer rates and more memory.
  • Control using chip(compatible with UNO R3 ATmega328P chip).
  • Includes new pin configuration (SCL, SDA, IOREF).
  • Clearly print on the female header connector, more precise and easier to use the wire.
Check Stock

Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable for Arduino

  • Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version..
Check Stock

REXQualis Nano V3.0, 3pcs Nano Board CH340 / ATmega328P with USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 with 3 Cable)

  • √ REXQualis Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system..
  • √ REXQualis Nano is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
  • √ REXQualis Nano is Using Atmel Atmega328P-AU MCU, Support ISP download and USB download, Power via the Mini-B USB..
  • √ The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
Check Stock

HiLetgo UNO R3 WiFi ATmega328P + WiFi + ESP8266 NodeMCU 32MB Memory USB-TTL CH340G for Arduino with USB Cable 2.4G WiFi Antenna

  • UNO R3 WIFI ATmega328P + WiFi +ESP8266 NodeMCU 32MB Memory.
  • Integrated with ESP8266 WIFI, 32MB Memory.
Check Stock

The Complete Country Guitar Method Compilation: Three Books in One! - Master Country Guitar Licks, Techniques & Soloing (Learn How to Play Country Guitar)

  • Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version..
Check Stock

DORHEA 4Pcs for Nano V3.0 ATmega328P Nano Board CH340 5V 16M Micro USB Microcontroller Board with PIN Headers Pin Unsoldered Compatible with Electronics Development Board Nano 328P Nano 3.0

  • The Nano for motherboard can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
  • The nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analogReference function. Analog pins 6 and 7 cannot be used as digital pins, some pins have specialized functionality..
  • It is a smallest, complete and breadboard friendly board. It has everything that board has (electrically) with more analog input pins and on board +5V AREF jumper, compatible with Windows, Mac and Linux operating system..
  • More breadboard space:Nano's got the breadboard-ability of the Mini USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND ）on one top, power and ground on the other..
  • This board is using the chips ATmega328P and CH340, not FT232, Support ISP download.
Check Stock

SunFounder R3 BoardBundled with Mega 2560 R3 ATmega2560-16AU Board for Arduin

  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory..
  • R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
  • This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
Check Stock

ES100 Present DJ Mix [Explicit]

  • ADK (DIY Soldering Kit) for EverSet ES100 WWVB-BPSK Atomic Clock Receiver IC.
  • Hardware is compatible with Arduino - Atmega328P with Arduino Bootloader.
  • Includes all Parts to build the kit as shown in the Pictures - including 1x ES100-MOD Receiver Module and 1x ES100-MOD Carrier Board.
  • For Demo Program, Libraries, Documentation etc. see Manufacturer's Website.
Check Stock

SunFounder Mega 2560 R3 ATmega2560-16AU Board Bundled with R3 Board and Ethernet Shield W5100 for Arduino

  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
  • This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory.R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • With this Ethernet Shield, for Arduino board can be used to connect to internet. Can be used as server or client. Directly plug puzzle board, no soldering required. It is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be ....
Check Stock

3 Axis 1.1f USB GRBL Control Board with Offline Working Remote Hand GRBL Controller LCD Screen for CNC Laser Engraving Milling Machine Wood Router

  • Name: GRBL 1.1F 3 Axis Control Board V3.4+Offline Controller.
  • Input voltage: 12-24VDC (recommend 24VDC).
  • Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor 42, 57).
  • Support spindle:24V 2A Support Spindle PWM speed (0%-100%).
  • Offline Control support SD card and tf card at the same time, standard capacity 1G, (notebooks generally have SD card interface, copy files are very convenient).
Check Stock

AURSINC WiFi Deauther & Bad USB Watch V4 ESP8266 & Atmega32u4 Programmable Development Board | Attack/Control/Test Tool | LOT DSTIKE for NodeMCU Arduino Leonardo | 1000mAh Rechargeable Battery

  • ...atest ESP8266 Deauther software, the deauther watch V4 can perform different secure tests for your WiFi networks, equipped with 3dB antenna. Moreover it can be used to develop your own software, it is indeed a ESP8266 development board, easy to operate. NOTE: ESP8266 supports 2.4GHz only.
  • [Extensible - 2 in 1] Added atmega32u4 to this watch, the V4 watch can now be a Bad USB watch and deauther one at the same watch, which is more powerful and capable than the former version DSTIKE deauther watches.
  • There are empty solder pads at the back of this watch which can be soldered to connect ESP8266 with atmega32u4. For example if you solder IIC pads this watch could become a wifi duck.
  • [Added Atmega32u4 - Bad USB] Flashed Arduino Leonardo bootloader already, the D&B watch can be programmed as bad usb directly. Two buttons(Digital pin 9 and 10) could be used to execute different commands. Moreover, a demo program has been flashed as well. Therefore when bad usb port connects PC, press DP9 button cmd window will be opened. Press DP10 button Notepad will be opened. Which can be programmed via Arduino IDE.
  • [Improved Battery Capacity - 800 to 1000mAh] Compared to Deauther watch V3, this deauther and bad usb watch V4 has been upgraded the battery capacity from 800mA....
Check Stock

Makeronics Microcontroller Board and RAB 7-in-1 Breadboard Holder with USB Cable Compatible with UNO R3 Board ATmega328P and Arduino IDE

  • RAB 7-in-1 breadboard holder is suitable for Arduino Uno, Mega2560 development breadboards,for Education kit or DIY project..
  • Control using ATMEL ATMEGA328P chip(the same with Arduino UNO R3).
  • 100% compatible with the Arduino IDE and RoHS Compliant.
  • Powered via the USB cable or power it with an AC-to-DC adapter or battery to..
Check Stock