Top Atmega48 20au

SunFounder Mega 2560 R3 ATmega2560-16AU Board Bundled with R3 Board and Ethernet Shield W5100 for Arduino

  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
  • This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory.R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • With this Ethernet Shield, for Arduino board can be used to connect to internet. Can be used as server or client. Directly plug puzzle board, no soldering required. It is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be ....
Check Stock

for Nano V3.0 Module ATmega328P 5V 16MHz CH340G Chip Microcontroller Development Board USB Cable for Arduino Nano 3pcs+3pcs USB Cable

  • 1.Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system..
  • 2.It uses the chip ATmega328P CH340 instead of FT232RL. You can start with various electronic projects by using the Arduino software (IDE). It has....
  • 3.It can be powered via USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27)..
  • 4.Nano CH340 controller is a compact board similar to the UNO, smaller and breadboard-friendly than Diecimila..
  • 5.Using Atmel Atmega328P-AU MCU, Support ISP download.
Check Stock

HiLetgo 3pcs Pro Mini Atmega328P 5V/16MHz Development Board Compatible with Arduino pro Mini

  • Bootloadered already in the board, easy to get started..
  • Support power supply by external 3.3V~12V DC power and 9V battery power..
  • Support serial downloading, 100% Compatible to all Pro MIni series shields and sensors..
Check Stock

AITRIP 5 Pack PRO Mini Atmega328P-AU 5V/16MHz Development Board Microcontroller Bootloadered with Pin Headers for Arduino (5pcs)

  • Support external power supply 3.8-12V DC.
Check Stock

HiLetgo 3pcs Pro Mini Atmega328P 5V/16M Replace ATmega128 Pro Mini Atmega328 328P DC5V 16M for Arduino

  • Support external power supply 3.8-12V DC.
Check Stock

ELEGOO MEGA R3 Board ATmega 2560 + USB Cable Compatible with Arduino IDE Projects RoHS Compliant

  • The Mega is 100% compatible with Arduino IDE and most of the shields are designed for the Arduino mega R3，RoHS Compliant.
  • The chip is Atmega + 2560-16au and 16u2, same with the official version..
  • Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin.
  • Stronger RESET circuit. Use 5. 5 * 2. 1mm DC barrel jack (compatible with 5. 5 * 2. 5mm DC barrel jack).
  • It contains everything needed to support the microcontroller.
  • simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started..
Check Stock

Developing Computer Skills - Binaural Beat Brainwave Subliminal Systems

  • 【Same function as the original Arduino】It great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs.
  • 【CHIP UPGRADE】Upgrade the main control chip to ATMEGA328P-AU.And it same as the original arduino pin layout. It compatible with all expansion boards..
  • 【ADDED A 500MA SELF-RECOVERYFUSE】Compared with the original ARDUINO, a 500ma self-recovery fuse is added, which automatically disconnects the circuit when short-circuited to avoid component damage.Change the plug-in pins of the original ARDUINO to SMD pins to avoid short circuit of the development board contact conductors, which is safer..
  • 【Added 10 LED marquees driven by MOS tubes】which avoids the problem of insufficient output current of the IO port of the single-chip microcomputer, and can directly drive a small DC motor through the IO port..
  • 【EASY TO USE】Change the original USB-B type interface to MICRO-USB interface, which is more convenient to use..
Check Stock

ACEIRMC 6pcs Nano V3.0 3.0 Controller Terminal Adapter Expansion Board Nano IO Shield Simple Extension Plate for Arduino Mano AVR ATMEGA328P

  • Designed for Arduino for Nano V3.0: The item is a terminal expansion adapter, working very well for prototyping Arduino for Nano projects.
  • It lables for Arduino for Nano version 3.0, however you can still use this adapter for the older version (just have to remember that A0-A7 are in the reverse order)..
  • You can use this adapter to easily hook up for arduino for Nano to an outside world via hook up wires.
  • This item is a terminal expansion adapter, designed for Arduino Nano V3.0..
  • Nano Terminal Adapter Shield Expansion Board Compatible with Arduino Nano V3.0 AVR ATMEGA328P-AU Module.
Check Stock

REXQualis Nano V3.0, 3pcs Nano Board CH340 / ATmega328P with USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 with 3 Cable)

  • √ REXQualis Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system..
  • √ REXQualis Nano is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
  • √ REXQualis Nano is Using Atmel Atmega328P-AU MCU, Support ISP download and USB download, Power via the Mini-B USB..
  • √ The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
Check Stock

150W AC Charger, for Asus TUF Rog ADP-150CH B Strix G531GT G531GD G731GT FX505 FX505D FX505GT FX505DT FX705DD FX705DT FX705DU 20V 7.5A 6.0 * 3.7mm Laptop Charger

  • 【POWER SPECS】AC input:100 - 240V / 50-60Hz, DC output:20V/7.5A, Power:150W, DC Plug Size :6.0 mm * 3.7mm( a pin in the interface ),not 4.5*3.0mm or 5.5*2.5mm..
  • 【COMPATIBLE M/N】 ADP-150CH B ADP-150CH BB 0A001-00081500 0A001-00081600..
  • 【COMPATIBLE MODELS】For Asus Rog G531GT G731GT FX505GT FX705GT FX705DD FX705DT FX705DU FX505DD FX505DT FX505DU..
  • For Asus TUF FX505DU FX505DU-AL042T FX505DU-AL049T FX505DU-AL052T FX505DU-MB74 fit for Asus TUF FX705DD FX705DD-AU017T FX705DD-AU026T FX705DD-AU028T FX705DD-AU032T FX705DD-AU033T FX705DD-AU059T FX705DD-AU089T fit for Asus TUF FX705DT FX705DT-AU013T FX705DT-AU018T FX705DT-AU027T FX705DT-AU034T FX705DT-AU035T FX705DT-AU039T FX705DT-AU041T FX705DT-AU042T FX705DT-AU054T FX705DT-AU059T FX705DT-AU068T FX705DT-AU078T..
  • 【Package includes】1 x 20v 7.5a 150w power adapter/charger, 1 x US plug power cord..
  • We offer 24 x 7 E-mail Support, 12 Months Warranty, 30 Days Money Back Guarantee..
Check Stock

ELEGOO MEGA R3 Board ATmega 2560 + USB Cable Compatible with Arduino IDE Projects RoHS Compliant

  • The Mega is 100% compatible with Arduino IDE and most shields designed for the Arduino mega R3，RoHS Compliant.
  • The chip is Atmega+2560-16au and 16u2, same with the official version..
  • Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Due that operate with 3. 3V. The second one is a not connected pin, that is reserved for future purposes..
  • Stronger RESET circuit. Use 5. 5 * 2. 1mm DC barrel jack (compatible with 5. 5 * 2. 5mm DC barrel jack).
  • It contains everything needed to support the microcontroller.
  • simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started..
Check Stock

YAOHUIMI Replacement Remote Control for Dimplex Electric Fireplace Ignite XL Revillusion PF3033HG Electric fire (A420220218-(DI-1)-023)

  • Work for: 690932 6909630100 6909690100 6909700100 6909780100 6909780200 6909790100 6909790200 6909790300 6909790400 6909800100 6909800200 6909990100 6909990200 3001250100RP 690932XXX BMR20 DMF20 GLN20.
  • Work for: HDN20-EU PF2325 PF2325CG PF2325HG PF2325HL PF3033 PF3033HG PF3033HL POR20 POR20 RBF24 RBF24DLX RBF24DLXWC RBF30 RBF30-AU RBF30WC RBF36 RBF36-AU RBF36P RBF36P-AU RBF36PWC RBF36WC RBF42-AU.
  • Work for: RBF42WC REL10 REL5 REL6 REL7 SKG20BLN STA20-EU SWD20-EU TRR20 XL50 XL74 XLF XLF100 XLF10017-XD XLF100-EU XLF50 XLF5017-XD XLF50-EU XLF60 XLF6017-XD XLF74 XLF7417-XD XLF74-EU XLF8817-XD RBF42.
  • The remote works without any programming straight out the package once you put in batteries..
  • THIS IS NOT A UNIVERSAL Dimplex Fireplace Remote Control, If you are not sure about which remote to order for your unit, please just contact us before place an order..
Check Stock