Top Attic Ceiling Insulation

INTSUPERMAI Attic Ceiling Ladder Black Loft Wall Ladder Stairs with Height 10 ft Ceiling Mounted Load Capacity 660 Pounds Pulling Down from Ceiling (27.6 x 47.2 inch)

  • 【Ceiling-mounted Type】--This Attic Ceiling Ladder is Ceiling Mounted Type. It CAN NOT be installed on the vertical wall and it should be installed on the ceiling. It can be simply pulled down from the ceiling or put away, which is very convenient..
  • 【3m/10ft Height】--Maximum vertical height stretched out is 3m/10ft. The length of the ladder when fully opened is about 3.4m. After opening, the distance between the support feet and the wall is about 1.4m. If you need a height below 3m/10ft, you can remove the steps to reduce the maximum height..
  • 【Opening Size】--Ceiling Opening Hole Size: 700 x 1200mm/ 27.6 x 47.2 inch. Thickness of the ceiling: 100-200mm/3.94-7.87in. The distance between opening hole and the wall should be greater than 50mm/2in. Please confirm these sizes before ordering..
  • 【Heavy Loading Capacity】--Max. loading capacity: 660 lb. But this does not mean that this attic ladder can stand on several people at a time. For your safety, please go up this ladder one by one..
  • 【Application】--It can be used when the ladder is pulled down. It is suitable for the attic, roof top, company, warehouse, hospital, school, etc. It is ideal for installation and modification of the house. This attic ladder can be suitable for indoor and outdoo....
Check Stock

Reflectix ST16025 Staple Tab Insulation Roll, 16 in. x 25 ft

  • The staple tab edge is manufactured by perforating the bubbles 3/4" Down each edge of the product.
  • This creates a foldable tab which provides easier stapling for installation in wall, ceiling, and floor systems.
  • Reflective insulation for use in a crawl space, attic, wall, metal buildings and post and frame structures.
  • Fiber free, environmentally safe, easy to install and lightweight.
Check Stock

Attic Stairs Insulation Cover 25'x54'x11', Attic Door Insulation Cover, R-Value 15.5 Attic Hatch Insulation, Class A Fireproof Attic Tent Ladder Insulation Cover Kit

  • 【ALL-YEAR ENERGY SAVING】- LEMOONE Attic Door Insulation Cover blocks the air and heat exchange between the room and the attic. Keep your house cold in the summer and warm in the winter, reduce energy consumption, saving your utility bill..
  • 【QUICK TO INSTALL】- Unfold→Insert→Fit it! Just 3 steps to install your attic door insulator easily. Get a great seal attic door with this attic tent cover now..
  • 【EASY TO ACCESS】- Zipper access and low opening design, allow your climb up and down the pull-down door to be safer and easier. The attic stairway insulation cover fits attic openings up to 25″ x 54″ x 11″..
  • 【UPGRADED PERFORMANCE】- This attic tent cover reflects 97% of radiant heat, R-Value of 15.5. It’s composed of heat-insulating bubbles and two layers of thickened foil, which is waterproof and fireproof..
  • 【WHAT YOU GET】- Attic door insulator * 1, installation manual * 1. Warranty service to solve your problems at any time * 24 months. Attic door covers build protection for your house all year!.
Check Stock

FAKRO LWF 869720 U.S Certified Fire Resistant Attic Ladder for 30 x 54-Inch Rough Openings

  • Easy-to-install fire-resistant and insulated wooden attic ladder.
  • also prevents heat loss with R-Value 9.5 insulation.
  • Adjustable to fit Ceiling heights between 7 feet, 11 inches and 10 feet, 1 inch.
  • Well balanced door opens and closes easily with no sudden movements.
Check Stock

Eapele Attic Stairs Insulation Cover Tent 25”x54”x11” for Pull Down Stairs, Double Bubble Reflective Radiant Barrier Reflects 95% of Radiant Heat

  • Reflects 95% of Radiant Heat— Eapele attic stair cover is made of double bubble reflective radiant barrier – so it is light weight, thin and effective..
  • Provide Air Seal—This insulation cover is designed for optimal energy efficiency. Our insulation cover works year around, on hot summers and cold winters, helps to keep your valuable heated and cooled air in your living space where you want it. The attic tent also prevents air leakage, dust and pollutants from coming in your home, helps keep your house clean and improves your indoor air quality..
  • Easy Zipper Access To Attic—This stairs insulation cover uses heavy-duty zippers to allow easy access to the attic which are durable enough to withstand repeated openings and closings, make it easy to get in and out. When you are trying to enter the attic, just open the zippers and fold the cover over..
  • Note—Measure the opening to determine the required size of a cover kit. Carefully measure the inside and outside dimensions as well as the height requirements of your attic stairs. Cover size: 25”x54”x11”..
  • Installs in Minutes—Installs Inside Rough Staircase Frame, it takes like 5 minutes to install using a staple gun, just stapling along the black seam binding.(Staple gun not included!!!!!....
Check Stock

Panady Attic Stairs Insulation Cover - 25" x 54" x 11" - Class A Fireproof Attic Tent Insulation Cover - Attic Door Insulation Cover - Attic Stairway Insulator - Attic Ladder Insulation Cover

  • Double bubble reflective radiant barrier (or xpe/epe foam).
  • Energy efficiency: Our attic door insulation cover works during the entire year, hot summers and cold winters.
  • It prevents air, dust or pollutants leakage into your home.
  • Installs in minutes: This attic insulation tent product is essential, easy to handle and install, being a 3 DIY step product.
  • Compared with other products, our Attic stair insulation cover uses heavy duty and high quality zippers which allows easy access to and from the attic without struggle.
  • If you want the best, this one is for you.
  • SAVE MONEY: Having a 15.3 R-Value and a major HVAC efficiency, it will help you to recover your investment just in a few months from the purchase.
  • If you want to cut household costs, for sure you should insulate your attic access door.
  • Class A fire resistance product: Being designed by our experts from USA to meet the highest standards concerning it’s manufacturing material, this attic door cover reflects 97% of the radiant heat and the air bubble in the second layer helps in blocking the heat transmission.
Check Stock

FAKRO LWP 66802 Insulated Attic Ladder for 25 x 47-Inch Rough Openings 47 Inches

  • Easy-to-install insulated wooden attic ladder for 25 x 47-inch rough openings.
  • Adjustable to fit ceiling heights between 7 feet, 5 inches and 8 feet, 11 inches.
  • Insulated wooden door frame helps to reduce energy cost (R-Value of 5.9). Insulation thickness - 1 1/8 inches. Hatch thickness - 1 3/8 inches.
  • Well balanced door opens and closes easily with no sudden movements.
Check Stock

Duct Outlet 12\ x 12\ Ceiling Box, w/ 12\ Round Collar - Connects Register Vent and Diffuser HVAC

  • 26 Gauge Galvanized Steel, Single Wall with No Insulation.
  • Built with standard plaster ground flange all the way around the square portion..
  • Connects a 12" Round Duct to a 12" x 12" Diffuser or Register Vent..
  • The ceiling box is nailed into the attic rafters and plastered or dry walled around the flange called plaster ground..
Check Stock

Duct Outlet 12\ x 12\ Ceiling Box, w/ 10\ Round Collar - Connects Register Vent and Diffuser HVAC

  • 26 Gauge Galvanized Steel, Single Wall with No Insulation.
  • Built with standard plaster ground flange all the way around the square portion..
  • Connects a 10" Round Duct to a 12" x 12" Diffuser or Register Vent..
  • The ceiling box is nailed into the attic rafters and plastered or dry walled around the flange called plaster ground..
Check Stock

Duct Outlet 10\ x 10\ Ceiling Box, w/ 8\ Round Collar - Connects Register Vent and Diffuser HVAC

  • 26 Gauge Galvanized Steel, Single Wall with No Insulation.
  • Built with standard plaster ground flange all the way around the square portion..
  • Connects a 8" Round Duct to a 10" x 10" Diffuser or Register Vent..
  • The ceiling box is nailed into the attic rafters and plastered or dry walled around the flange called plaster ground..
Check Stock

Duct Outlet 16\ x 16\ Ceiling Box, w/ 14\ Round Collar - Connects Register Vent and Diffuser HVAC

  • 26 Gauge Galvanized Steel, Single Wall with No Insulation.
  • Built with standard plaster ground flange all the way around the square portion..
  • Connects a 14" Round Duct to a 16" x 16" Diffuser or Register Vent..
  • The ceiling box is nailed into the attic rafters and plastered or dry walled around the flange called plaster ground..
Check Stock

Duct Outlet 14\ x 14\ Ceiling Box, w/ 14\ Round Collar - Connects Register Vent and Diffuser HVAC

  • 26 Gauge Galvanized Steel, Single Wall with No Insulation.
  • Built with standard plaster ground flange all the way around the square portion..
  • Connects a 14" Round Duct to a 14" x 14" Diffuser or Register Vent..
  • The ceiling box is nailed into the attic rafters and plastered or dry walled around the flange called plaster ground..
Check Stock