Top Auto Battery Terminal

Aoerzn Premium Battery Terminal Connectors, 2Pcs Quick Release Disconnect Car Battery Cable Terminal, Positive Negative for SAE/JIS Type A Posts, Good Contact, Corrosion Resistance

  • THE AOERZN ADVANTAGE: Join our customer groups, and enjoy more excellent auto parts. Cooperate happily! Note: During installation, it is not recommended to overighten these two screws.Prevent rupture..
  • WIDELY APPLICABLE: Our battery terminal connectors suitable for Cars, Vans, Motorhomes, Caravan, Truck Batteries, Car Audio, etc. Just make sure to connect the correct terminal for the correct polarity. Works great for replacing worn out and corroded terminals..
  • CONVENIENT: This battery terminal connector has 4 post for wire connection. Designed for multiple cable connections. The provided hex wrenches make for easy installation. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed. Convenient wiring and firm connection..
  • HIGH-QUALITY: The battery terminals are made of tinned copper, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss. Fits on round post auto batteries SAE/JIS Type A posts..
  • YOU WILL GET: 2Pcs pure copper battery terminals connectors. 1Pcs Alan wrenches. I believe this product can fully meet your requirements. Welcome guide, high quality assurance and friendly customer service..
Check Stock

CZC AUTO 1-2-Both-Off Battery Disconnect Switch 12V 24V 48V Master Isolator Cut Off Switch Battery Selector Switch for Marine Boat Car Truck Camper Trailer RV Vehicles

  • SOLID BATTERY TERMINAL: made of durable brass and electroplated with copper, which is rust and corrosion resistant, for safety use. With bright metallic color for easy daily check. With a long bolt for convenience.
  • WIDELY APPLICATION: apply to the battery has side post terminal with 3/8’’ hole. Also used for electrical equipment. DC 12V-24V system, 250A continuous and 750A momentary at DC 12V. CZC AUTO blade switch is suitable for car, boat, truck, vehicle, RV, ATV and etc..
  • EASY TO INSTALL & USE: assemble the battery shut off switch to the negative cable. Turns power on and off by just lifting the lever up or down, on/off 2 position.
  • NO MORE DRAINED BATTERY: batteries that are empty and not charged for a long time will shorten the life causing you to replace it. This battery cutoff blade type switch allows you to eliminate any unwanted parasitic power draw from the battery.
  • WARRANTY: CZC AUTO offer 30-day money-back for any reason, 12-month warranty for quality-related issues. PlEASE NOTE: Any problem in using our side post battery terminal negative disconnect switch, simply contact us, your problem will be solved within 24 HOURS.
Check Stock

eOUTIL 12V Car Battery Tester, Auto Battery Load Analyzer with LCD Display - Test Battery Life Percentage,Voltage, Resistance and CCA Value (AE300-1)

  • ☀ eOUTIL Car Battery Analyzer is designed for any 12V battery, no internal batteries required and gets the power directly from the vehicle battery. continuous testing won’t damage the battery, keeps the operation safe for all levels of users..
  • ☀ This auto battery tester analyzes four accurate battery indexes include battery condition, CCA value, voltage value, and resistance. The bar chart range indicates the capacity of the battery, which has indication range from 0%-100%..
  • ☀ Digital battery tester with portable design, built-in beep remind function, and large backlight LCD screen make the testing quicker and reading data easier, even in the dark does not affect reading..
  • ☀ The 12 volt battery tester based on sonar reflection principle, all the indexes of battery are analyzer by special alternating current signals which lead to very accurate testing results. Does it quickly and precisely!.
  • ☀ Heavy Duty Battery Clinchers: Red clincher means positive terminal and black clincher means negative terminal which should be clinched correspondingly on the terminals of the battery..
Check Stock

2PCS Battery Terminal Connectors 4way Positive Negative Battery Clamp car Terminals Connector Battery Terminal Quick Release Disconnect for SAE/JIS Type A Posts with Terminal Cleaning Brush(Silver)

  • 【Easy to Use】 With positive and negative labeled, easy to identify. 1 hex key provided for easy installation. Quick disconnect. After installing battery, connect to the battery posts by pressing down the lever, so no tool needed..
  • 【Convenient and Firm】 The Battery Terminal has 4 way terminals, designed for multiple connections. Wiring is easy to modify. Convenient wiring and firm connection..
  • 【Made of High Quality】 The Battery Terminal Connectors are made of tinned copper, which is corrosion resistant, with good electrical conductivity.
  • 【Dimension】 For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4) or section 16 - 35mm². Minimum wire size: 16mm (5/8"). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. Positive inner diameter: 17.5~19.1mm, Negative inner diameter: 15.9~17.5mm..
  • 【Wide Application】 Fits on round post auto batteries SAE/JIS Type A posts. The positive and negative battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Note：If you receive defective parts, don’t worry, please tell us immediately, we will give you the perfect solution！！.
Check Stock

2PCS Battery Terminal Connectors 4 Way Quick Release Disconnect Battery Terminals Positive Negative Battery Cable Ends for SAE/JIS Type A Posts by ZONBANG Copper

  • 【4 WAY BATTERY TERMINAL】There are 4 posts for wire connection in the battery terminal connectors which are mainly used for SAE / JIS Type A car battery. The purpose of the design is for multiple cable connections..
  • 【EXCELLENT QUALITY】With superior corrosion resistance and electrical conductivity, the tinned copper quick release battery terminal also can reduce voltage distortion and transmission loss..
  • 【EASY TO IDENTIFY】With the signs of positive “+” and negative “-”, the quick disconnect battery terminal is easy to identify. And the battery terminal works great for replacing worn out and corroded terminals. Tip: Make sure to choose the correct terminal for the correct polarity..
  • 【PACKAGE INCLUDE】You will receive 2PCS battery terminal connectors(positive and negative), 2PCS anti-corrosion fiber washers and an allen wrench..
  • 【WIDE APPLICATION】The battery terminal connectors can be used for Trailer, Winch, Truck, Tractor, Jeep, RV, Cars, Vans, Caravan, Boat, etc..
Check Stock

Glarks 315Pcs Quick Splice 2.8mm 4.8mm 6.3mm Male and Female Wire Spade Connector Wire Crimp Terminal Block with Insulating Sleeve Assortment Kit

  • Product Type: High quality wire crimp terminal block with insulating sleeve assortment kit.
  • Product Meterial: The terminal block are made of tin-plated red copper and the insulating sleeves are made of nylon, high conductivity, anti-oxidation, durable enough for your use.
  • Package Include: In this kit, it include 2.8mm/4.8mm/6.3mm male and female crimp terminal connector block 210pcs and 105pcs insulating sleeves total 315pcs packed in a plastic box.
  • Easy to Use: You just need to connect the male and female terminals at both ends, and then the male and female terminals docked to complete the wiring easily.
  • Application: These spade terminal can be widely used to home appliances, auto, audio system for battery or rocker switch quick connecting/disconnecting.
Check Stock

TKDMR Copper Wire Lugs AWG with Heat Shrink Set,Battery Cable Lugs Battery Cable Ends Ring Terminals Connectors with Heat Shrink Tubing Assortment Kit (AWG 6 Kind Sizes, 130)

  • Product Type: High quality wire crimp terminal block with insulating sleeve assortment kit.
  • Product Meterial: The terminal block are made of tin-plated red copper and the insulating sleeves are made of nylon, high conductivity, anti-oxidation, durable enough for your use.
  • Package Include: In this kit, it include 2.8mm/4.8mm/6.3mm male and female crimp terminal connector block 210pcs and 105pcs insulating sleeves total 315pcs packed in a plastic box.
  • Easy to Use: You just need to connect the male and female terminals at both ends, and then the male and female terminals docked to complete the wiring easily.
  • Application: These spade terminal can be widely used to home appliances, auto, audio system for battery or rocker switch quick connecting/disconnecting.
Check Stock

Battery Terminal Connectors(1 pair), Positive & Negative Auto Battery Cable Terminal Top Post With plastic bottoms(Copper Tinned),Fit For Nissan 243407F000,243407F001 Altima Murano etc

  • Specifications:Positive Battery terminal hole dia: 0.71 IN.Negative battery terminal hole dia:0.63 IN..
  • Product Quality:The battery terminal connector is made of high quality copper.The has a galvanised surface to give it better corrosion resistance. There is a plastic bottom and the screws are made of iron..
  • Fitment: Compatible with Many Vehicles This Battery Terminal Set Fit For: Nissan Altima Murano Pathfinder Maxima Quest Rogue Titan Versa etc. Replaces part # 243407F000 243407F001.
  • Package List: 1 Pair Battery Terminals. 1 PCS Battery Terminal Cleaning Brush. 1 Pair Battery Terminal Anti Corrosion Washers.
  • SATISFACTION&GUARANTEED:Purchase this Car Battery Cable Terminal Clamps Connectors with a 6 Month Warranty. We provide carefree return, If you have any issues with your order, contact us and we will make it right..
Check Stock

Battery Cutoff Switch Top Post Battery Disconnect Switch Rustproof Safe Brass Stable Current Good Electrical Conductivity Battery Terminal Link Quick Switch for 6V 12V Car RV ATV

  • Wide Application: This battery terminal cutoff switch has wide range of uses, and is compatible with 6V 12V cars, vans, large trucks, pickups, buses, etc..
  • Strong Function: The battery terminal isolator switch is used for battery to isolate and secure the electrical system, and can eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely..
  • Good Electrical Conductivity: The battery terminal isolator switch can be installed on the negative terminal of the battery, which can stable current, and protect the battery, and prevent leakage..
  • Brass Material: This top post battery disconnect switch is made of brass material, which is rust resistant, good electrical conductivity, durable and safe to use..
  • High Reliability: The battery terminal isolator switch is professionally manufactured, and battery terminal link quick switch has high performance, strong reliability, making sure use..
Check Stock

TKDMR 2Pairs Car Battery Cable Terminal Clamps-Connectors - Battery Terminal with Plastice Cover,Good Contact,Corrosion Resistance,Applicated in Car,Van.

  • √【Package Includes】: Our kit includes 2 pair of Negative and Positive Battery Cable Terminal Clamps Connectors and 4 pieces Pure Copper Wire Lugs Battery Cable Ends Copper Eyelets Tubular Ring Terminal Connectors..
  • √【High Quality】: Our Wire Lugs Eyelets Tubular Ring Terminal all are made of pure copper.And the Battery Terminals connectors has plastic cover, which is connected better than zinc alloy and has better corrosion-resistance..
  • √【Size】: Positive Battery Terminal Connectors:11/16"(17mm).
  • Positive Battery Terminal Connectors: 5/8"(16mm).
  • √【Applicated Scene】: It is used for automobiles, trucks and caravan battery terminal connector..
  • √【Quality Guarantee】: We are manufacturers. So don't worry about quality. We are highly confident with our products.you won't regret it if you got it! Buy it now!.
Check Stock

Spurtar Battery Terminal Connectors 0/4/8/10 Gauge AWG Heavy Duty Top Post AMP Battery Terminal Auto Car Audio Battery Terminal Cable Ends Replacement Positive & Negative with 2 Clear Covers and Shims

  • Secure & Stable: Spurtar battery terminals are perfect for car battery terminals to make a tight and secure connection without any hassle with complex installation. It's the perfect tool to help protect the battery terminal ends in daily use..
  • 2/4/8/10 AWG Gauge Inputs: Battery terminal connectors have 4 different sizes of a wiring outlet for easy wiring modification. Includes Positive (19mm) Battery Terminal Connector + Negative (17mm) Battery Terminal Connector.
  • Quality Material: Battery connectors are made of zinc alloy and copper material for strong electrical conductivity to help reduce current transmission loss. Also, it can protect the battery post against corrosion to prolong the lifespan.
  • Universal Fit: Spurtar Car battery terminal clamps is the best solution to organize and connect multiple cables together. Suitable for most models of car Audio battery and it works great to replace the worn out and corroded terminals.
  • NOTE: The hole of the Positive Terminal is 19mm while the Negative Terminal is 17mm. The Positive is Bigger than The Negative, please check before purchasing.
Check Stock

Open Terminal Connector Crimping Tool Kit,2.8mm 3.5mm 3.9mm 4.8mm 6.3mm 24-14 AWG Crimper SOMELINE for Use on Molex 2.13mm 2.36mm AMP - TE CONNECTIVITY Connectors,Male Female Spade and Ring Terminal

  • ✅ 【Adjustable Crimping Tool】With an automatic adjustment ratchet mechanism, an adjustable locking device, and the function of releasing pressure points. crimper tool is designed to crimp 24-14 AWG non-insulated open barrel, OEM-style terminals and wire splices It provides the perfect crimping service for the connector you buy..
  • ✅【 Crimping Pliers Capacity】Crimping tool has a wide range of crimping capacity. It’s capable of crimping 2.8mm, 3.5mm, 3.9mm, 4.8mm and 6.3mm pitch open barrel terminals from Molex Standard .093"/MX150/MLX Crimp Terminal , AMP - TE CONNECTIVITY Mate-n-Lok/FASTON Connector etc..
  • ✅ 【Type and Size】The terminal block is made of copper, which has high conductivity, oxidation resistance and durability, enough to meet the needs of most DIY projects. 240 wire crimp terminals (TAB 2.8mm, 4.8mm, 6.3mm spade connectors and insulating sleeves) for 24-14 AWG cable. A portable storage box is provided for easy storage and sorting of cable terminations..
  • ✅【Ring Terminal】Brass ring terminals, commonly used for cycling battery connections and ground connections, connecting aftermarket switches, ignition coils, ground wires, and similar items that require screws or bolts..
  • ✅【Widely Application】The combination of crim....
Check Stock