Top Auto Resume Function

Official FLSUN Super Racer SR 200mm/s High Speed Printing Delta 3D Printer with Filament Sensor and Auto Leveling FDM Delta 3D Printer 1.75 PLA DIY 3D Printers Printing Size Φ260x330mm

  • ... Linear Rail Guide & Three-Axis Linkage Technology.
  • High-precision linear rail guide and Three-Axis Linkage Technology , providing higher printing accuracy and stability and printing speed, and lower noise..
  • Auto-Leveling System & Resume Printing Function & Removable Lattice Bed.
  • Automatic leveling system, easy to start printing, Flsun Super Racer 3D printer has the ability to resume printing even after a power outage or lapse occurs, Coated lattice glass platform, good filament viscosity, replaceable design..
  • 10.2"(L) x 10.2"(W) x 13"(H) / 260 x 260 x 330mm..
  • Lifetime technical support and 24-hour customer service, if you have any questions, please feel free to contact us..
Check Stock

Creativity CoreXY Double Z axis Auto-Leveling 3D Printer 300x300x350MM Remote Range ELF High Precision Aluminum Profile Frame Dual Z axis BL Touch Auto Leveling

  • (Dual Z-Axis High Precision)The print precision is greatly improved by equipping with Dual Y-axis Sideway Design. Full aluminum frame and closed loop....
  • (Large Build Volume) ELF FDM 3D Printer comes with larger build spaces available. At 300 x 300 x 350mm, able to print models that 90 percent of other....
  • (Filament Detection Auto and Power Loss Resume) 1.Filament Detection: Auto pause if filament runs out or breaks 2.Power Loss Resume: One click to....
  • (Extra Lattice Glass)Add a Lattice glass on the heated bed, which makes models are easier to be removed. Lattice glass is harder than ordinary glass,....
  • (Technical Support)The Creativity provide one year after- service for printer and technical assistance and 24H response..
Check Stock

Creality CR-10S 3D Printer HICTOP Filament Monitor Dual Z axis Screw Rods 300x300x400mm

  • UPGRADE: CR-10S updated with dual Z axies leading screw rod which make printing quality better and more stable, with different mainboard and firmware....
  • RESUME PRINTS: CR-10S has the ability to resume prints even after a power outage or lapse occurs..
  • FILAMENT MONITOR: CR-10S mainboard with filament alarming function, this function can detective if filament is running out or not..
  • WITH TWO COLORS (BLUE AND ORANGE) decorative strips inside. You can use either of them as per your preference..
  • EASY ASSEMBLY: Delivery with three sets, just need about 10 minutes to assemble well..
Check Stock

NAVISKAUTO 10.1\ Headrest DVD Players with HDMI Input 2 Headphones Mounting Brackets, Support Sync Screen, Last Memory, Region Free, USB/SD Card (2 Headrest DVD Players)

  • 【HDMI Input】Sync up to 1080P video and audio from your computer, mobile phone, Raspberry Pi, Xbox, etc. Also support AV IN and AV OUT function..
  • 【3S Auto Load Discs】Extremely easy for adult on front seat or kids on back seat to change dvds..
  • 【FREE Car Charger Splitter】Power two dvd players at the same time. Resume function starts from where you left, no need to worry repeat or skip..
  • 【2 Car DVD Players】Play Different/Same DVDs simultaneously. Region Free CD/DVD Player, perfectly compatible with DVD/CD/MP3/VCD/SVCD/DVD-5/DVD-9 and other media formats: MP4/MKV/MPG/TS/TRP/VOB/FLV/RMVB/AVI/MOV/ASF/WMV..
  • 【Package Content】2 * DVD Players for Car, 2 * Headphones, 2 * IR Remote Controls, 2 * Mounting Brackets, 1* Car Charger Splitter, 1* AV Cable, 1* User Manual, 100% Customer Service and 18 Months Warranty..
Check Stock

Designing 3D Printers: Essential Knowledge

  • Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs..
  • Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well..
  • Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion.
  • V-shape with POM wheels make it move noiseless, smoothly and durable..
  • Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110 degree..
  • Strict Test: Strict testing for key components before delivery and life-time technical supports available..
Check Stock

Creality CR-10 V3 3D Printer with Titan Direct Drive Extruder Glass Bed Silent Board Dual Cooling Fans Meanwell Power Supply Large Printing Size 300x300x400mm

  • ...le to the largest model. Adjustable belt tensioners make SV03 achieve proper belt tension to get high quality prints..
  • MEANWELL POWER SUPPLY - Built-in 350W Meanwell power supply ensures stable and sufficient power, fast heatup for the hotbed and nozzle. It protects SV03 from unexpected power surges. Resume printing function allows you turn off SV03 while printing, and resume your print from last layer anytime later..
Check Stock

ANYCUBIC Chiron 3D Printer Semi-auto Leveling Large FDM Printer with Ultrabase Heatbed Suitable for 1.75 mm Filament TPU Hips PLA ABS etc / 15.75 x 15.75 x 17.72 inch 400x400x450mm

  • Large Build Volume, ANYCUBIC Chiron 3D Printer comes with one of the largest build volume of 15.75 x 15.75 x 17.72 inches, you can print models that....
  • Semi Auto Leveling and Resume Print, Equipped with an auto leveling module which automatically detects 25 points, supports real time adjustment....
  • Easy to Assemble and Use, Full metal body, stable and durable, modular design and only take 5-10 minutes to assemble, TFT Touch Screen with brand new....
  • Printing Precise and Safe, Equipped with Y Axis Dual Sideway and Z axis dual screw rod design, the height on both sides of the Z axis will be....
  • More Function, Ultrabase Pro, Coated with a special composite coating make the printed large model not easy to warp and easy to demold, All ANYCUBIC....
Check Stock

LOTMAXX Shark V3 FDM 3D Printer Auto Leveling, 3D Printing/Laser Engraving/Dual-Color Multifunctional 3D Printer Printing Size 9.25x9.25x10.43in & Engraving Size 9.25x9.25in

  • Multifunctional 3D Printer: LOTMAXX Shark V3 is an FDM 3D printer with higher printing accuracy and speed. And it also supports two-color printing and laser engraving. The 1.6 W laser engraving allows you to engrave with a wide variety of materials like bamboo, ceramic tile, wood, leather, paper, etc..
  • Smart & Precise 3D Printer Auto Leveling: LOTMAXX Shark V3 3D Printer equipped with intelligent leveling tools. When using the product for the first time, it is recommended to level it manually before turning on automatic leveling to ensure printing accuracy..
  • Super Fast Cooling & LED Decoration: Structured dual extruder with 3 fans and 3 modes, supporting dual-color printing. Compatible with PLA/PLA+/Ultra filament. The Shark V3 print head is also equipped with led decoration. Not only can light up the darkness but also can fully enjoy the fun of printing..
  • Filament Sensor and Power Off Resume Printing: LOTMAXX Shark V3 features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents..
  • Removable Touch Screen & Nano-coated Glass Plate: The TFT to....
Check Stock

BTECH Mini UV-25X4 25 Watt Tri-Band Base, Mobile Radio: VHF, 1.25M, UHF Amateur (Ham)

  • What Makes the UV-25X4 Unique: Dual Synchronize Display Mode, Mic Audio Gain Settings, In depth user's guide, Auto Power Off Function, Channel Mode Editing Settings, Auto Scan, Scanning Resume, and Variable Frequency Scanning, Quad Watch Delay Time, Randomization Privacy Mode, Builds upon previous generation UV-2501+220.
  • Frequency Range: 144-148MHz (VHF), 222-225MHz (1.25M), 420-450MHz (UHF).
  • Broad (Wide) / Narrowband (Narrow) Selectable.
  • Recommended Accessories: Pair UV-25X4 with the Nagoya TB-320A Antenna (and RB-50 Magnetic Mount) for easy installation. The PC04 FTDI Cable is recommended for easy computer programming.
  • Dual Watch monitoring VHF/UHF and 220Mhz: The 220 MHz band antenna lowpass filter is switched with a relay and the 2 meter lowpass filter and 70 cm highpass filters are switched with PIN diodes - resulting in a audible relay switch noise when monitoring 220MHz with VHF/UHF simultaneously. A relay that completely isolated the 220 MHz RF filter won't impact the RF performance of the 2 meter/70 cm bands. If monitoring multiple 220MHz or VHF/UHF simultaneously the relay is not heard or used..
  • Tribander Mobile Radio Kit Includes: BTECH UV-25X4, Speaker Mic, 6 foot DC Cable with Cigarette Plug Connector, Ra....
Check Stock

XTC-3D - High Performance 3D Print Coating - 24 Ounce Unit

  • Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs..
  • Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well..
  • Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion.
  • V-shape with POM wheels make it move noiseless,....
  • Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110 degree..
  • Strict Test: Strict testing for key components before delivery and life-time technical supports available..
Check Stock

Official Creality Ender 3 V2 Upgraded 3D Printer with Silent Motherboard Meanwell Power Supply Glass Bed 220x220x250mm

  • Silent Motherboard: Creality ender 3 v2 with TMC2208 stepper driver and 32-bit V4.2.2 silent motherboard.
  • More stable movement performance can ensure....
  • Carborundum Glass Platform: Enable the hot bed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer..
  • MeanWell Power Supply: Ender 3 V2 is equipped with a MeanWell power supply, which can meet the needs of fast heating and long-term printing..
  • Resume Printing Function: Ender 3 v2 has resume printing function that can from the last recorded extruder position after suffering unexpected power....
  • Ideal for Beginners: Creality ender 3 v2 provides simpler operation.
  • the upgrade of this printer reduces the burden on beginners, everyone can enjoy....
Check Stock

ANYCUBIC Kobra Plus 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Red) Bundle

  • Smart & Precise 3D Printer Auto Leveling: Anycubic Kobra Plus adopts Anycubic LeviQ new auto-leveling system with 25-point precise leveling up, making leveling and printing accessible in one touch. Easy control for a more intelligent printing experience..
  • Filament Run out Detection & Power off Resume: Equipped with filament & power detection sensor, Anycubic Kobra Plus can pause the printing process intelligently if you encounter the situation of running out of filament or unexpected power failure. It can resume printing from the last printing position, which can save your time and reduce wasting..
  • Large Build Volume & Fine Printing: The printing build volume of Anycubic Kobra Plus is 2.5 times larger than Anycubic Mega S. 300*300*350mm printing size to satisfy all your 3D printing needs. Equipped with Double thread Z-axis moving construction. Anycubic Kobra Plus can minimize the shaking, ensurig more model details can be restored. It is also the cornerstone to ensure high printing speed..
  • Component Upgrades to Achieve Creative Freedom: Equipped with an all-metal geared extruder, which heats up and melts the filaments quickly, ensuring that the filaments are smooth extremely. At the same time, the 6000RPM dual fans allows the mode....
Check Stock