Top Automatic Plasma Cutting

Reboot Plasma Cutter Machine 50Amp Plasma Cutting Equipment CUT50D 3/5'' Cut 110/220V High Frequency 1/2'' Clean Cut,IGBT Air Plasma Cutting Machine for Aluminum Alloy Mild Steel Cast Iron

  • [Widely Application and Low Cost] 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation.this Plasma Cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work, repair/maintenance,metal processing,manufacture.
  • [SEE WHAT OUR CUSTOMER SAYS] I tried it on 120v with the air pressure turned way down on a piece of 1/8 angle iron the pilot arc worked as it should and it went through it like it wasn't even there. Next thing I tried it on was some roughly 3/8 wall tubing I needed to cut and notch for the safety cage on my figure 8 car..
  • [Generator Supported] This Plasma Cutting machine works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V,50A breaker for 110V.
  • [Blowing Back] Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and consumables.[110/220V Input ]Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • [Warranty] Buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance.
Check Stock

LOTOS LT5000D 50A Air Inverter Plasma Cutter Dual Voltage 110/220VAC 1/2\ Clean Cut

  • ...nless steel, alloy steel, mild steel, copper, and aluminum..
  • ★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz)..
  • ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website..
  • ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LT5000D Plasma Cutter are "LCS22" or "LCS33". Please search "Lotos LCS22" or "Lotos LCS33".
  • ★ It CANNOT compatible with Lotos LCOn20, LCON40 or LCON90 Consumables Sets or any other third part consumables set. ★ PACKAGE INCLUDES: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, consumables, Instruction Manual, etc..
  • ★ SETUP WITHIN 1 MIN: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect ....
Check Stock

PrimeWeld Plasma Cutting Table with Replaceable Slats, Plasma Cutter Table, Cutting Equipment, 32" H x 21" W x 30" L

  • Plasma Cutting Solution - The PrimeWeld Plasma Cutting Table offers you an industrial solution to a problem that most face when trying to cut material with their plasma cutter or gas torch. Using this table you can lay your workpiece over the support slats and make cuts with your plasma cutter or gas torch and not worry about what to use to support the back side of the material..
  • Sturdy, Carbon Steel Construction - The 250 pound capacity allows you to plasma cut or weld heavy plate steel. As an extra safety feature, the slag catch tray helps you to not worry about pieces falling to the floor..
  • Work At The Right Height - This slatted-top, steel cutting table is the place to support your workpiece while plasma cutting or welding. The dimensions are 32"H x 21"W x 30" L and are designed to let you cut and work at the perfect height..
  • Replaceable Slats - The PrimeWeld Plasma Cutting Table comes with 23 replaceable slats. The slat support spacing allows arcs and sparks from your welder or plasma cutter to penetrate the steel..
Check Stock

WeldingStop 40pcs SL60 Electrode 9-8215 Tips 9-8211 Nozzle 80A for Thermal Dynamics SL60 SL100 Torch CutMaster 52 82 152 102 Plasma Cutter Consumables

  • ✓CutMaster Cutter—— The plasma cutter spare parts kit are fitting in Thermal Dynamics CutMaster 52 / 82 Plasma Cutter SL60 Plasma Cutting.
  • The plasma consumables also can fit Thermal Dynamics CutMaster 102 / 152 Plasma Cutter with SL100 Plasma Torch.
  • ✓For Use With Torch—— These electrodes and tips are fitting in plasma Torches 2CZF1 and 2CZF2.
  • ✓Package Including—— 20pcs SL60 electrodes 9-8215 and 20pcs SL60 standoff tips 9-8211 80A Nozzle WS OEMed.
  • ✓Plasma Cutting Current—— These plasma consumables can be uesd within 80A plasma cutting.
  • ✓Replacement Parts—— These electrodes and tips are replacement parts that made by WeldingStop, and not original.
Check Stock

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock

SPRIGHOLLY plasma cutter 50A Dual Voltage 110V/220V Compact Metal Cutter 1/2\ Quality cut plasma cutting equipment high frequency CUT50 3 year warranty black IGBT Inverter machine

  • 【OUTPUT & PERFORMANCE】 At 220V, 10-50A DC output, clean cut 1/2" and maximum cut 3/4".
  • at 110V, 10-50A DC output, 1/3" ideal clean cut and maximum cut 2/5". ( Please note: the thickness of the cut depends on the material).
  • 【Fast cutting in only three steps】Built-in automatic drain air regulator, you only need to connect the air compressor, plug in the power supply and the plasma cutting torch, and you can start working. And there is no need to worry about drainage and regulating gas.Very convenient！.
  • 【Energy Saving & Multi-protection】 The cutting machine adopts IGBT inverter technology, which features with current control, high quality and stable performance, so the energy consumption is also greatly reduced. With the protection of the electric circuit against over currents, over voltages and low voltages, the cutting welder works in a more safer and professional way..
  • 【Easy Cut】Equipped with advanced AG60 torch to reduce loss and extend service life. With your SPRIGHOLLY Plasma Cutter, you can cut stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials without breaking a sweat,and produces minimal slag. Designed for both demanding industrial and construction work, or home and hobby use. Our high-quality Pl....
Check Stock

Drag Shield Hand 60485 Retaining Cup 60389C fit Plasma Cutting IPT-60 PT-60 Torch 6-PKG

  • These plasma cutting torch consumables can use on IPT-60, IPTM-60, PT-60, PTM-60 Series plasma cutting torch.
  • Package including 1pc Retaining Cup + 5pcs Drag Shield.
  • There are 6pcs plasma cutter IPT60 consumables in every package.
  • The plasma cutting current is about 30-60A.
  • They are WS replacement parts, NOT Original plasma consumables kits.
Check Stock

Plasma Cutter,50 amp Plasma Cutting Equipment,Dual Voltage Metal Cutter,Portable Plasma Cutter Machine,High Frequency 50/60Hz 1/2-inch Clean Cut,110/220V Digital Display CUT50D

  • ✅Plasma Cutter,cut50d is made basic at high quality electronic components. Adopt advanced IGBT inverter soft switch technology,also with digital current display,Using Pulse-Width-Modulation (PWM) technology, the inverter power supply generates powerful DC welding currents..
  • ✅Automatic Dual Voltage / Dual Frequency (110 V/220 V 50/60Hz),if you have a generator power supply, please ensure that the generator is not less than 6000w..
  • ✅It is recommended to choose 50A circuit breaker protection when your power supply voltage is 110V, and 30A circuit breaker protection when 220V..
  • ✅The cutting thickness is 12mm 65psi under 220V, 8mm 50psi under 110V in good performance. Severance cutting thickness can reach at 16mm if needed for a slow run..
  • ✅The cut50d is an excellent choice for home DIY jobs and light duty small business projects.Compare with oxyhydrogen cutting, plasma cutting is much more safefy, quick, low cost and easy to use..
Check Stock

SL40 Plasma Torch Electrode 9-0096 fit SL40 Plasma Torch Thermal Dynamics Cutmaster 42 Plasma Cutter Consumables 10pcs

  • Plasma consumable type--SL40 plasma torch Electrode Tip kit, Rated cutting current 40amp plasma tip.
  • SL40 plasma torch consumables Ref code—9-0096 9-0094.
  • The SL40 plasma tip can fit Thermal Dynamics Cutmaster 42 (1-4200，1-4200-7，7-0040) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
  • The 9-0096 9-0094 plasma nozzle can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
  • The plasma tip are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

WeldingStop 9-0094 9-0096 SL40 Torch Plasma Electrode Tip fit Thermal Dynamics Cutmaster 42/12+ Plasma Cutter SL40 Plasma Torch Consumables 10pcs

  • Plasma consumable type--SL40 plasma torch Electrode Tip kit, Rated cutting current 40amp plasma tip.
  • SL40 plasma torch consumables Ref code—9-0096 9-0094.
  • The SL40 plasma tip can fit Thermal Dynamics Cutmaster 42 (1-4200，1-4200-7，7-0040) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
  • The 9-0096 9-0094 plasma nozzle can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
  • The plasma tip are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

WeldingStop PT-60 IPT-60 Retaining Cap 60389C Drag Shield 60485 Electrode Plasma Contact Cutting Consumables PKG/46

  • These plasma cutting torch consumables can use on IPT-60, IPTM-60, PT-60, PTM-60 Series plasma cutting torch.
  • Package including 20pcs Electrodes + Tips and 1pc Retaining Cup + 5pcs Drag Shield.
  • There are 46pcs plasma cutter IPT60 consumables in every package.
  • The diameter of tips are 0.9mm or 0.035 inches, plasma cutting current is about 30-40A.
  • They are WS replacement parts, NOT Original plasma consumables kits.
Check Stock

Plasma Cutter, 50Amp Dual Voltage 110V/220V Plasma Cutting Machine, Inverter Metal Plasma Cutting Equipment, Maximum Cutting Thickness 5/9\(14mm)

  • 【Plasma Cutter】The CUT-50 cuts rusted, rough or painted surfaces effectively and produces very little dross during the cutting process. CUT-50 plasma cutting machine has better cutting quality and longer wearing parts life..
  • 【Excellent Performance】20-50 A output, 2/5" (10mm) ideal clean cuts and 4/7" (14mm) maximum cut thickness under 220V.
  • 10-35 A output, 1/3" (8mm) ideal clean cuts and a maximum cut thickness of 2/5" (10mm) under 110V. This plasma cutter suitable for cutting alloy steel, stainless steel, copper, aluminum and other metals..
  • 【Dual Voltage Input】This plasma cutting machine supports 110V / 220V switching input power supply. 110V, 50/60Hz @ 35 A input.
  • 220V, 50/60Hz @ 28 A input. The product comes with a power conversion plug, which can be plug and play in different environments..
  • 【Safe & Portable】The plasma cutter is small in size, light in weight, and comes with a handle for easy portability. Plasma cutter with built-in over-heat protection, over-voltage protection, strong heat dissipation, good insulation.Adopt air pressure adjustment device，use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and other metals..
  • 【Package Includes】PT-31 Plasma Torch, Hose, Ground Clip, Power Adapt....
Check Stock