Top Automatic Tool change

Buildalot Specialty Carbon Brushes 1660_DeWalt_DW840 for DeWalt Grinder DW840 - With Automatic Stop, Spring, Cable and Connector

  • High power 4.7 HP (maximum motor HP) 8,500 rpm motor of the angle grinder with overload protection provides higher operating speeds under load.
  • Dust Ejection System of the metal grinder protects the motor from damaging particles entering air intake that would otherwise abrade the motor and increases brush life.
  • Anti-vibe trigger handle of DEWALT angle grinder reduces user fatigue caused by vibration.
  • Lightweight design (11.6 lbs) lessens user fatigue.
  • Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage.
  • Low-profile gearcase allows for work in tight areas.
  • 8,500 rpm provides optimal material removal with 7-inch grinding wheels.
  • Brush door allows for quick brush replacement.
  • Quick-Change guard allows user to quickly adjust guard to redirect sparks.
  • Soft-grip trigger handle provides greater comfort and control.
Check Stock

DEWALT Angle Grinder Tool, 7-Inch/9-Inch, 5.3-Horsepower (D28499X)

  • High power 5.3 HP (maximum motor HP) and 6,000 rpm motor of angle grinder with overload protection provides higher operating speeds under load.
  • Rotating rear handle provides improved ergonomics in cutting and grinding applications for the metal grinder.
  • 5-position side handle of DEWALT angle grinder provides improved ergonomics for specific applications.
  • Epoxy coated field and armature provide long service life against abrasion from airborne debris.
  • Low-profile gear case allows for work in tight areas.
  • Keyless adjustable guard provides tool-free guard adjustments to increase productivity.
  • Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage.
  • 6,000 RPM provides optimal material removal with 9-inch grinding wheels.
  • 2-wire double insulated 'S' jacket rubber cord provides increased durability and life in hot and cold climates.
Check Stock

Upgraded Mini Lathe 7\X14\

  • ...ails provides smooth and durable moving..
  • 【NEW UPGRADE DESIGN】-This upgrade mini lathe uses metal gear instead a nylon one,increase service life.Adopts aluminum handwheel is more durable than plastic handwheel,and not easy to be damaged.Digital display screen is convenient for you to follow up the processing.Add automatic power-off protection switch to make the operation safer.An extra lamp can help you finish processing in places with insufficient light.We provide one extra gear belt and free 7PCS lathe carbide tool..
  • 【PRECISION DESIGN】-Power metal lathes has large center distance 350mm(13.78") and swing over bed:180mm (7.09"),spindle bore: 21mm(0.82"). A accurate self-centering 3-jaw is supplied,for holding a variety of round or square cylindrical materials stability.The metal lathe features forward and reverse design. The variable speed of MT4 Spindle range 0-2500RPM, two speeds are available for meet your different metal workings: Low Speed 0-1250RPM, High Speed 100-2250 RPM..
  • 【PROFESSIONAL COMPOUND REST】-4-way quick change tool post  can install 4 common turning tools at the same time. Open the lock and change the tool with a slight turn. You can adjust tool post forwards/backwards by turn blade adjustors with accurate scales clockwise....
Check Stock

Woodworking Chamfer Drilling Tool Step Countersink Drill Bit Set for for Glass Metal 9PCS Drill

  • The Chamfer Drilling Tool is made of high-speed steel, titanium-plated, practical and durable.
  • There are 3 step drill bits and 6 Countersink drill bits in the package.
  • Countersunk bit set is suitable for quick change, suitable for most power tools with 0.64 cm hex shank.
  • Countersink Drill Bit Set is suitable for chamfering various materials, such as wood, plywood, aluminum, iron, copper, fiberboard, particleboard, plastic, PVC board, etc..
  • Automatic manual Chamfer Drilling tool with spring load mechanism, suitable for wood, metal and other materials.
Check Stock

DEWALT Angle Grinder, 7-Inch, 8,500 RPM, 4.9-HP (DWE4597N)

  • High power 4.9 HP (maximum motor HP) 8,500 rpm motor of the angle grinder provides overload protection giving higher operating speeds under load.
  • Anti-Rotation E-CLUTCH System activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor of the metal grinder..
  • Anti-vibe side handle of DEWALT angle grinder is a Perform and Protect feature that reduces the users exposure to vibration.
  • Power-Loss Reset prevents accidental re-starts following a power disruption when the tool is left in the "on" position.
  • Power-Off advanced electronic overload protection shuts the tool off before it reaches overload or burn-up.
  • Dust Ejection System increases brush life and protects the motor from damaging particles entering the air intake that would otherwise abrade the motor.
  • Lightweight design (12.3 lbs) lessens user fatigue.
  • Low-profile gearcase allows for work in tight areas.
  • Anti-vibe trigger handle reduces user fatigue caused by vibration.
  • Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage.
Check Stock

Pneumatic Clamp 1/8\ Intake Interface High Strength Pneumatic Hold Fixture for Welding

  • The operation is simple, and it is easy to realize automatic control, and the clamping type work can be performed without using artificial force..
  • It can stably ensure the machining accuracy of the workpiece. When the workpiece is clamped with pneumatic clamps, the positional accuracy of the workpiece relative to the tool and the machine tool is guaranteed by the fixture, which is not affected by t.
  • It can expand the scope of use of machine tools and realize multi-function of one machine. The use of special pneumatic clamps can change the purpose of the original machine tool and expand the scope of use of the machine tool to realize multi-function o.
  • The pneumatic reaction speed is fast and the testability is high, so the test time is shortened and the production efficiency is improved in the production process..
  • It can reduce the auxiliary working hours, improve the labor productivity, and clamp the workpiece with the pneumatic clamp. The workpiece can be quickly positioned and clamped without the need of alignment, which significantly reduces the auxiliary work.
Check Stock

Industrial Service Solutions Aftermarket Gardner Denver Aeon 4000 (1 Gal.) Compressor Oil | 1 Gallon | Replacement Lubricant | for Compressed Air Equipment and Systems

  • Mobil met 766 is used for tapping, threading, milling, gear shaving and shaping, broaching, planning, parting-off and automatic lathe operations.
  • Increased production resulting from longer tool life and reduced downtime for tool changes.
  • Improved surface finish, closer tolerances and reduced formation of built-up edge resulting in fewer rejects.
  • Cooler work pieces and increased feed rates possible for reduced operating costs.
  • Suitability for a wide range of severe machining operations on difficult steels.
Check Stock

Sesamee K440 4 Dial Bottom Resettable Combination Brass Padlock with 4-Inch Hardened Steel Shackle and 10,000 Potential Combinations

  • Set-your-own 4-digit combination for convenience and security.
  • 10,000 possible combinations which can be easily changed and set.
  • 2 inch wide solid brass case for superior security and weatherability.
  • Best used for job boxes and gang boxes, utility meters, substations, cable boxes, tool chests, boxes and cribs and lockers.
  • Shackle clearance is 4 inches and there are 4 dials.
  • Set your own combination 10,000 potential personalized optionsDescriptionCCL K440 Sesamee 4-Dial Resettable Brass Body with Brass Internal Parts is a set-your-own 4-digit combination for convenience and security. 10,000 possible combinations which can be easily changed and set. 2 inch wide solid brass case for superior security and weatherability. All brass internal locking mechanism. Tough heel and toe lever locking system. Hardened steel-chrome plated shackle. Automatic "0000" stop. Product of Taiwan and designed in Wheeling, Illinois. Best used for job boxes and gang boxes, utility meters, substations, cable boxes, tool chests, boxes and cribs and lockers. Shackle clearance is 4 inch. 4 dials. Carded packaging..
Check Stock

Makita XT704 18V LXT Lithium-Ion Cordless 7-PC Combo Kit 3.0Ah

  • Variable 2-speed 1/2" hammer Driver-Drill (0-600 & 0-1, 900 RPM) with Makita-built 4-pole motor delivers 480 in.Lbs. Of max torque.
  • Variable speed impact driver (0-2, 900 RPM & 0-3, 500 IPM) provides 1, 460 in.Lbs. Of max torque for a wide range of fastening applications.
  • 6-1/2" circular saw delivers 3, 700 RPM for faster cutting and ripping through wood and weighs only 7.3 lbs. With battery.
  • Recipro saw provides 0-2, 800 SPM and features "tool less" blade change.
  • 4-1/2" cut-off/ angle grinder delivers 8, 500 RPM.
  • features automatic speed change technology that adjusts speed and torque during operation for....
Check Stock

DEWALT Angle Grinder, 7-Inch, 8,500 RPM, 4.9-HP (DWE4597) , Yellow

  • Anti-Rotation E-CLUTCH System of the angle grinder activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor..
  • High power 4.9 HP (maximum motor HP) 8,500 rpm motor of the metal grinder provides overload protection giving higher operating speeds under load.
  • Anti-Rotation E-CLUTCH System activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor of DEWALT angle grinder..
  • Anti-vibe side handle is a Perform and Protect feature that reduces the users exposure to vibration.
  • Power-Loss Reset prevents accidental re-starts following a power disruption when the tool is left in the "on" position.
  • Power-Off advanced electronic overload protection shuts the tool off before it reaches overload or burn-up.
  • Dust Ejection System increases brush life and protects the motor from damaging particles entering the air intake that would otherwise abrade the motor.
  • Low-profile gearcase allows for work in tight areas.
  • Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage.
  • 3-position side handle provides improved ergonomics for specific applications.
Check Stock

Makita 9565PCV SJS High Power Paddle Switch Angle Grinder, 5'

  • Variable 2-speed 1/2" hammer Driver-Drill (0-600 & 0-1,900 RPM) with Makita-built 4-pole motor delivers 480 inches Lbs of max torque.
  • Variable speed impact driver (0-2,900 RPM & 0-3,500 IPM) provides 1,460 inches Lbs of max torque for a wide range of fastening applications.
  • 6-1/2" circular saw delivers 3,700 RPM for faster cutting and ripping through wood and weighs only 7.3 lbs.
  • Recipro saw provides 0-2,800 SPM and features "tool less" blade change.
  • 4-1/2" cut-off/ angle grinder delivers 8,500 RPM.
  • features automatic speed change technology that adjusts speed and torque during operation for optimum performance.
  • Includes - (2) 18V LXT Lithium-Ion batteries, rapid charger, XPH10Z, XDT11Z, XSS02Z, XRJ04Z, XAG03Z, DML185 and bag.
Check Stock

Bosch RH745 1-3/4-Inch SDS-Max Rotary Hammer

  • SDS-max bit system provides tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate.
  • Combination dual mode selector 2 modes of operation: rotary hammer and hammer only mode.
  • Variable speed dial provides accurate bit starting and controlled chipping applications.
  • Turbo Power feature delivers 10% more power in hammer only mode.
  • Service Minder light indicates when preventative maintenance is required.
Check Stock