Top Automation And Control Hydraulic Oil Cylinder

NEWTRY 20T Low Profile Hydraulic Jack Porta Power Kit + CP-180 Manual Hydraulic Hand Pump Multi Section Jack, 1.18” Stroke Industrial Mini Hydraulic Cylinder

  • ▷[IMPORTANT PARTS]---The hydraulic pump consists of ZG 3/8 connector, non-slip handle, hydraulic pump body, release valve and hose. Our hydraulic cylinder jack not only has a smooth surface, but also has good sealing and no oil leakage. At the same time, the non-slip handle makes the use more comfortable..
  • ▷[MULTI-SECTION DESIGN, SUITABLE FOR NARROW SPACE]---This low profile hydraulic jack is only 2.24inches high, but the stroke is up to 1.18 inches. Compared with ordinary jacks, multi-section jacks can be used in a narrower and lower space, effectively increasing the stroke of the jack within the height of the body, so that the weight can be raised higher and more convenient to use..
  • ▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Anti-dust ring can reduce pollution, thereby prolonging the service life of hydraulic cylinder..
  • ▷[COMPOSITE STRUCTURE & MULTI-FUNCTION]---Equipped with various accessories, it has m....
Check Stock

Strongway 12-Ton Hydraulic High-Lift Double Ram Bottle Jack

  • Dual-stage hydraulic cylinder lifts large loads on a smaller footprint.
  • Constructed of high-grade steel and built to exacting standards for quality and durability.
  • Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust.
  • Paint is oil-, grease- and dirt-resistant for easy cleanup.
  • High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life.
Check Stock

Bottle Jack Ram 10 Ton Capacity Porta Power Hydraulic Pump Auto Body Frame Repair Tool Kit Power Set Auto Tool for Automotive Truck Farm and Heavy Equipment/Construction Skroutz

  • ▷[IMPORTANT PARTS]---The hydraulic pump consists of ZG 3/8 connector, non-slip handle, hydraulic pump body, release valve and hose. Our hydraulic cylinder jack not only has a smooth surface, but also has good sealing and no oil leakage. At the same time, the non-slip handle makes the use more comfortable..
  • ▷[MULTI-SECTION DESIGN, SUITABLE FOR NARROW SPACE]---This low profile hydraulic jack is only 2 inches high, but the stroke is up to 1 inch. Compared with ordinary jacks, multi-section jacks can be used in a narrower and lower space, effectively increasing the stroke of the jack within the height of the body, so that the weight can be raised higher and more convenient to use..
  • ▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Anti-dust ring can reduce pollution, thereby prolonging the service life of hydraulic cylinder..
  • ▷[COMPOSITE STRUCTURE & MULTI-FUNCTION]---Equipped with various accessories, it has multiple functions such as lifting, jacking, shoveling and splitting, and can be quickly installed by using quick connectors. 10T and 20T jacks are ....
Check Stock

Recajia Universal 6 Hole Flywheel Rotor Magneto Puller Tool with 5mm Diameter and 6mm Bolts

  • [No Oil Leakage] - The hydraulic puller is forged with high-quality steel and cast in one piece. There is NO need for sealing rings and NO oil leakage. And the hydraulic cylinder is thickened with a strong pressure resistance..
  • [3 or 2 Jaws Interchange] - 3 jaws / 2 jaws can be easily interchanged can be easily interchanged, and can also be used Horizontally or vertically, without site restrictions. It is flexible to operate and easy to replace..
  • [Complete Accessories] - This 3 in 1 bearing puller set integrates pump, tubing, and drawing machine, which includes: 1 x hydraulic cylinder, 1 x handle, 3 x jaws, 6 x pulling tabs, 6 x screws, 1 x spring thimble, 1 x pull ring, 1x portable thickened plastic box..
  • [Wide Applications] - The bearing separator is widely used in various places. Such as truck hub, brake drums, sprockets, rotors, car axles, wheel bearing, shaft and pulley disassembly.
  • railway vehicle, factory machinery and mining equipment maintenance, etc..
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the hydraulic puller, you can replace it for free..
Check Stock

Lesu 1/14 Metal Hydraulic Rc Backhoe Loader Aoue Bl71 2 in 1 Electric Excavator

  • Front and rear aluminum alloy wheels, high-quality rubber tire covers, full drive 4 * 4 power differential locking axle, and the reduction ratio of front and rear axles is 1:2.7..
  • The front shovel is equipped with a stainless steel bucket, and the bucket has a hydraulic opening and closing function..
  • Front fork, hydraulic front shovel, hydraulic bucket, one machine with multiple functions.
  • The rear digging arm is equipped with a digging assembly to move laterally, and the digging range is larger..
  • Hydraulic support leg, more stable operation.The rotary cab seat is convenient for the driver to operate at both ends and has a higher degree of simulation..
  • The hydraulic system is equipped with a hydraulic reversing valve, switching valve, brushless ESC, oil pump, fine stainless steel oil cylinder, overflow valve and other hydraulic components to form a precise hydraulic system, which is more coordinated and linear..
Check Stock

AlveyTech Rear Fender Set for 150cc - 250cc Go-Karts Set of 2

  • BRAKE MASTER CYLINDER: Built to strict quality control standards Brand New Aluminum Alloy quality material, durable and long lasting. The brake master....
  • APPLICATION: This Go Kart Brake Master Cylinder Fits for 90cc 110cc 125cc 150cc 200cc 250cc Roketa, American Sportswork, Baja, Kindi, Sunl, Hammerhead....
  • SPECIFICATIONS: Brake pedal hole-to-hole distance 20mm, cylinder mounting hole-to-hole distance 60mm..
  • PACKAGE INCLUDE: 1 × Hydraulic Brake Master Cylinder (bolts and nuts has been installed up), Please check our pictures before buying to make sure the....
  • QUALITY ASSURANCE: 100% brand new Hydraulic Brake Master Cylinder, 1 Year Warranty, Buy with confidence! If problem in the year quality warranty time,....
Check Stock

Happybuy 900W Electric Rebar Bender 5/8Inch 16mm Hydraulic Electric Hand Held Rebar Bender Machine for Bending Steel Rope

  • Integral Hydraulic Cutter 7/8": It is a manual integral hydraulic rebar cutter, through the pump to generate pressure, to cut rebar, easy to operate. Max. Cutting Diameter: 7/8". This tool is suitable only for Rebar..
  • Durable Construction: The cutting head of this rebar cutting tool is made of high strength forged steel with high hardness. The rebar cutter blades have been through special heat treatment, having a good expansion ability..
  • Thickened Cylinder 13 Ton: It is a manual integral hydraulic cutter tool, through a 13 tons cylinder to generate pressure, with good tightness and no oil leakage, to generate pressure, to produce large force for rebar cutting. The one-person operation, save your time and energy..
  • Convenient Operation:Thickened, anti-slip, and insulated handles give you comfortable and safe using experience, suitable for long-lasting use. Durable design and exquisite workmanship make it fit for your needs. The rebar cutter is easy to store with a toolbox offered..
  • Professional Purpose: Hydraulic rebar cutters are widely used in construction, electricity, transportation, oil, metallurgy, and other areas where it is necessary to cut the rebar..
Check Stock

New 12V Hydraulic Pump /Hydraulic power unit/Electric dump trailer power unit (Double Acting 6 Quart )

  • CE certification to ensure you can use it safely..
  • It consists of high pressure gear pump, DC motor, multi-purpose integrated block, various function valves, oil tank and other components. It is widely used as the power resource for lifting and pushing device..
  • This hydraulic power unit is used as a fuel supply device,also it is the perfect replacement pump for 12V DC remotely controlled hydraulic systems.
  • through external pipe system connected to a number of hydraulic cylinder to control multiple sets of valve movement..
  • The motor is built to last, and the tank has been specifically designed to not crack & leak under harsh conditions.Its high quality starter ensure long life and a fast starting each time..
  • Widely used in dump trailers, dump trucks, RVs, lifts, elevator doors, trailers, wreckers, car carriers, agricultural equipment etc..
Check Stock

Bonvoisin 15T Hydraulic Gear Puller Set Wheel Bearing Puller Kit 2 or 3 Jaws Pulling Separator for Wheel Hubs Rotors Car Axles Pulleys Brake Drums

  • [No Oil Leakage] - The hydraulic puller is forged with high-quality steel and cast in one piece. There is NO need for sealing rings and NO oil leakage. And the hydraulic cylinder is thickened with a strong pressure resistance..
  • [3 or 2 Jaws Interchange] - 3 jaws / 2 jaws can be easily interchanged can be easily interchanged, and can also be used Horizontally or vertically, without site restrictions. It is flexible to operate and easy to replace..
  • [Complete Accessories] - This 3 in 1 bearing puller set integrates pump, tubing, and drawing machine, which includes: 1 x hydraulic cylinder, 1 x handle, 3 x jaws, 6 x pulling tabs, 6 x screws, 1 x spring thimble, 1 x pull ring, 1x portable thickened plastic box..
  • [Wide Applications] - The bearing separator is widely used in various places. Such as truck hub, brake drums, sprockets, rotors, car axles, wheel bearing, shaft and pulley disassembly.
  • railway vehicle, factory machinery and mining equipment maintenance, etc..
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the hydraulic puller, you can replace it for free..
Check Stock

Powerhorse Horizontal/Vertical Log Splitter - 22 Tons 212cc Engine

  • Heavy-duty hydraulic system protects and extends the life of hydraulic system components by preventing contaminants from entering and circulating....
  • 10 Micron Zinga-made Powerhorse filter removes contaminants created during operation or introduced when adding or changing oil.
  • 100 Mesh suction strainer acts as a pre-filter to prolong the life of the return line filter, valve, pump and cylinder and also prevents contaminants....
  • 40 micron breather prevents airborne contaminants from entering the hydraulic system.
  • Inlet and outlet locations are on opposite sides of the tank to promote cooling of the hydraulic fluid by increasing its travel time.
Check Stock

TPard MTB Hydraulic Brake Set Bicycle Disc Brakes Kit with 160mm Rotors,Left Front 800mm Right Rear 1400mm Aluminum Alloy Hydraulic Brake Fit for Mountain Bike, MTB

  • ...mbining 2 pack of stainless steel 6.3inch(160mm) Rotors, 2 sets of 8 bolts, and one installation tool. Ideal replacement of high quality to repair or upgrade components on your bike brake..
  • Safety Above All: Brakes = Safety. Some people's still using cable mechanical disc brakes, time to upgrade with this affordable hydraulic brakes, a customer even avoided a 25mph accident with our brakes durng the night cycing..
  • Material: Front/Rear hydraulic caliper are both made of premium aluminum alloy and attached with IS/PM Adapter to let you easily install either IS or PM fork/frame mount. Hydraulic brake levers are made of strong enclosed alloy and one oil-injection point to let you easiy maintain the brakes by feed the mile oil. The lever fit most common handlebar of 0.87inch(22mm) in diameter..
  • US Standard: Design as Left for Front, Right for Rear, please kindly measure your existing brake hose for appropriate rear length..
  • Three-dimensional oil cylinder design: the vertical cylinder can provide a larger piston in a short distance, and you can easily brake by gently pinching it!.
Check Stock

Fix Sinking Office Chair, Mellbree 304 Stainless Steel Chair Saver Kit Height-Adjustable Office Chair Saver for Stop Sinking Without Cylinder Replacement (with Hexagon Wrench)

  • ...ging. All recommend this pure metal gasket style. Office chair saver for stop sinking can control the height of the seat, prevent repeated sinking, and can rotate the seat normally after improvement (the old plastic model cannot). As a simple replacement consumable, please contact us with any questions..
  • Because the hydraulic system of the old chair was damaged, the office seat kept sinking and could not maintain the desired height. Using Mellbree fix sinking office chair can solve this trouble, make the chair at the ideal height, easy to install and replace, save money and effort. Suitable for most office chairs, within the cylinder diameter of 25-28mm..
  • Installation steps: The chair saver kit uses screws to fix the metal plate to control the sinking of the chair. Step 1: Adjust the seat to the desired height, and wipe the hydraulic oil on the exposed surface of the hydraulic rod（Keeps hydraulic rods and sheet metal dry） . Step 2: Install the metal plate and rubber gasket, and clamp them to the lowest and fix it with screws. Step 3: Use a hexagonal wrench to twist the screw vigorously and fix it, try to sit and fine-tune it..
  • The sinking chair fix kit is made of 304 stainless steel, which is durable and easier to install than plastic models. After ....
Check Stock