Top Automobile Relay

ONLINE LED STORE RTT7121A 12V 40A 4-Pin Relay [Direct Replacement] [Mechanical Relay] [Single Pole Single Throw] - Replacement for Toyota 90987-02006 OEM Relay

  • DIRECT RELAY REPLACEMENT- Our 4-pin relay is a direct factory replacement for the Toyota 90987-02006 OEM relay only priced more attractively..
  • EASY & AFFORDABLE MAINTENANCE- Keep your Toyota or Lexus vehicle running at its best with this plug & play replacement relay.
  • OEM-STYLE QUALITY- Manufactured to the same quality standards as the Toyota 90987-02006 relay, the OLS RTT7121A 12V 40A 4-Pin Relay delivers OEM-style quality..
  • COMPATIBLE WITH POPULAR TOYOTA & LEXUS CARS- Fits popular Toyota models: 1986-1991 Camry, 1995-2007 Corolla Sedan, 1990-1999 Previa, 1994-1997 RAV4, 1984-1997 Tercel, and much more..
  • COMPATIBLE WITH OLS 12-SLOT RELAY BOXES- This 12V 40A 4-pin relay is also compatible with our 12-Slot Relay Box (PSZACCEPS142R)..
Check Stock

Edwards Signaling 7005-G5 Door Annunciator

  • ☆☆With six independent relay switches, and by dialing its mobile phone number to activate the NO.1 relay switch, it will reject the call and turn on the connected device without answering, so it will not generate when dialing this machine Call charges, it will identify the authorized phone number that is calling, and refuse to answer the call without answering. It has 5 other independent relay switches, which can be turned on or off by sending SMS text to GSM‑RELAY6..
  • ☆☆6‑channel 250V 10A 50Hz relay contact, the relay can operate almost all equipment, optional relay working mode. Has 6 alarm inputs. When the input is shorted to GND, an alarm will be triggered and an alarm message will be sent..
  • ☆☆One relay output with call mode and the other relay output with SMS control can be easily programmed with mobile phone or PC software. SMS can be used for digital programming quickly and conveniently through SMS or on‑board quick teach button..
  • ☆☆Support free control mode or security authorization number control mode, support custom commands, easy to understand. Optional password to keep the system in safe operation mode, support remote password operation and password change..
  • ☆☆Applications include remote control of heating of holiday ....
Check Stock

Dexter K23-410-00 Hydraulic Brake Assembly 12-1/4\X3-3/8 10K GD Left Hand

  • 20904439 Brake Control Relay for GM-recommended replacement part for your GM vehicle’s original factory component,Offering the quality, reliability, and durability of GM OE,Manufactured with GM Original Equipment specification for fit, form, and function..
  • 20904439 Trailer Brake Continue Relay Replace Part #20904439..
  • 20904439 Brake Control Relay- OEM Equipment Trailer Brake Continue Relay Assembly fits for Cadillac Chevrolet GMC 2007 2008 2009 2010 2011 2012 2013 2014..
  • 20904439 Brake Control Relay Applies to:fits For GM Silverado Sierra 07-14,Package Contents:1* Trailer Relay..
  • 20904439 Brake Control Relay is the same as the pictures.We provide carefree return, Our aim at pursuing the maximum satisfaction of our buyers!.
Check Stock

AITRIP 8 Pack 3V 1 Channel Relay Power Switch Module with Optocoupler Opto Isolation High Level Trigger for IOT ESP8266 Development Board

  • 【30VDC 250VAC Load】 Equiped with high-current relay, AC250V 10A.
  • DC30V 10A, each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • 【High Level Trigger】The relay module is triggered by high level signal, which can be input from microcontroller IO..
  • 【 3V/3.3V power relay module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
  • 【Wide Application】- These 3v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/ ESP8266 module etc..
  • 【Long Life】 - Fast response time less than 20ms and long lifetime up to 100,000 times snap action with diode freewheel protection..
Check Stock

uxcell 2 Pcs 4.7 Ohm 2 Pin Refrigerator Start Relay for Compressor Black

  • Total Size: 3.2 x 2.2 x 2.85cm / 1.26" x 0.87" x 1.12".
  • Pretty generic start relay used on various brands of mini fridges and coolers.
  • How to Select Relay : Shop relay, consistent of size,resistance and pin quantity as replacement.
  • Relay Breakdown Judgment : For start relay,shake it,with noise of debris collision,is broke..
Check Stock

Aoicrie 5Pcs DC 5V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 5V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine /etc..
Check Stock

Aoicrie 5Pcs DC 12V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc..
Check Stock

Engine Wire Loom Wiring Harness for GY6 125cc 150cc 250cc Scooter Quad Bike ATV Buggy Go Kart Dune

  • Starter Solenoid Relay + Starter Motor for GY6 4-Stroke ATV Dirt Bikes Pit Bike Scooters Go Kart Moped Quad 4 Wheelers Buggys 50cc 150cc 200cc 250cc Engine. Compatible with Tao tao SUNL Coolster Baja Roketa Icebear Jonway GY6 engine parts replacement..
  • Starter Solenoid Relay for 4-Stroke GY6 Engine 50cc 150cc 200cc 250cc ATV Dirt Bikes Scooters Go Kart Dne Buggys Quad 4 Wheelers Pit Bike Moped Roketa SSR Taotao Sunl Coolster..
  • Motor Starter for GY6 125cc 150cc Scooter ATV Moped Go Karts Quad 4 Wheelers Taotao SUNL Baja Icebear Roketa Jonway.
  • GY6 Motor Starter For 152QMI 157QMJ engine motor. 12V / 9 Teeth / CW Rotation..
  • Starter Solenoid Relay,Starter Relay Solenoid also works with Honda Clones 50cc, 70cc, 110cc, 125cc, 250cc etc. GY6 Starter Solenoid Relay Replace oem part number: 35850-286-007,35850-286-027,35850-286-017,35850-375-000. High cranking power,reduce startup switch electric current.
  • High quality material,efficient and durable..
  • 4 Stroke Engine Parts GY6 150cc starter motor may also know as 150cc motor,150cc scooter motor,4 wheeler motor,starter motor motorcycle,gy6 starter motor,150cc gy6 starter motor,50cc starter motor,150cc starter motor,125cc starter motor,moped starter motor,scooter starter motor,go kart starter motor,ATV starter motor. ....
Check Stock

AEDIKO 4pcs Relay Module DC 5V Relay Switch 1 Channel Relay Board with Optocoupler Isolation Support High or Low Level Trigger

  • Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate.
  • All Interfaces of Relay can be Wired Out Through the Terminals Directly,Normally Open and Normally Closed.
  • Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit Prevent Damages to I / O Port by Relay Switch Current.
  • Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay (NC,C,NO) and for Input.
  • Wide Application: DC 5V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc..
Check Stock

AEDIKO 4pcs DC 5V Relay Module 2 Channel Relay Board with Optocoupler Support High or Low Level Trigger

  • Normally Open Interfaces Maximum Load : AC 250V/10A, DC 30V/10A.
  • 2 Channel Relay Module 5V Comes with High-Current Relay,Trigger Current : 5mA.
  • 5V Relay Module is 2 Channel Isolated, Each Relay Can Individually Switch On/Off by An Opto-Isolated Digital Input.
  • Relay Module Designed With Fault-Tolerant , Even If The Control Line Breaks, The Relay Will Not Move.
  • With Optical Coupling Isolation,Triggering More Reliable and Stable.
  • 2 Channel Module Equipped With Screwed Terminal Plate and Fixed Bolt Holes,Standard Interface Can Connect With Microcontrollers and be Controlled by a Wide Range of Microcontrollers.
Check Stock

Hilitand AD22B04 12V Signal Decoder 4 Channel DTMF Tone Relay Phone Remote Control PLC

  • 【12V】Working voltage is DC 12V, you can easily find suitable power for this relay..
  • 【reverse polarity protection.】This signal decoder relay ahs reverse polarity protection which can extend the service life..
  • 【8 modes】8 modes of operation: Non-locking (Momentary ), self-locking (Toggle), inter-locking(Latch), 5/20/60/120/250-second delay..
  • 【default control】The default control command is 1/2/3/4. Example: Dial 1 to control relay 1, dial 2 to control relay 2, dial 3 to control relay 3, dial 4 to control relay 4.
  • control commands can be changed any 1-4 bits. (For more details, refer to "AD22B04_4 channel DTMF controller commands setting manual ")..
  • 【operating current】Standby 11-13 MA, 1 relay "open" 44MA, 2 relays "Open" 77MA, 3 relays "Open" 110MA, 4 relays"open" 140MA..
Check Stock

Charge-Discharge Monitor, DROK 0-90V 100A DC Ammeter Voltmeter, Battery Capacity Amp-Hour Watt-Hour Power Time Multimeter, LCD Display Digital Voltage Current AH WH Watt Meter Tester with Hall Sensor

  • 7-IN-1 MULTIMETER --- measure and display voltage (0-90V), current (0-100A), power, battery capacity, amp-hour, watt-hour and time simultaneously..
  • APPLICATION --- can be used as battery charge-discharge tester meter for automobile and car battery.
  • as battery capacity monitor for photovoltaic system.
  • as voltage meter, current meter, power meter, etc..
  • BIDIRECTIONAL AMMETER --- the multimeter can detect current in dual direction without changing the wiring direction when used for monitoring charging and discharging..
  • PROTECTION --- over-voltage protection, over-current protection, over-power protection, over-charged protection, time limitation, etc..
  • automatically/manually switch off LCD screen.
  • with output control button to enable/disable output (requires a relay)..
Check Stock