Top Automotive Blade Fuse Holder

4 Pack Car Cup Holder Coaster, 2.75 Inch Diameter Non-Slip Universal Insert Coaster, Durable, Suitable for Most Car Interior, Car Accessory for Women and Men (Red)

  • Dual-slot Fuse Holder: Provides 1 fuse holder to protect existing circuits and a second fuse holder to protect new circuit. Blue flexible socket tail, very easy to connect to any naked wires by only use a vise.
  • Easy to Use: No need to cut or splice wires to install your electronic accessories, convenient and easy to add an extra power or connection to the fuse box..
  • Superior Quality: All of them are made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity, durable and practical for your DIY application.
  • Multipurpose: You can use this dual-slot fuse holder when adding LED strips, radar detectors, dash cams, or any other electronic that requires direct wiring into the fuse box without cutting or splicing.
  • Wide Compatibility: 3pcs low profile mini fuses adapter with 5 Amp low profile mini blade fuse fits for Korean Cars.
  • 4pcs mini fuse adapter with 15 Amp mini blade fuse fits for Japan and US Cars.
  • 3pcs standard fuse adapter with 5 Amp standard blade fuse fits for European Cars.
Check Stock

HUIQIAODS 2 Pack Mini Blade Fuse Holder 18 Gauge Waterproof Pigtail Inline Fuse Holder with 5A ATM Fuses

  • ♪ Premium Quality---Inline blade fuse holders wiring harness select Tin plated copper as conductor to ensure its good bending performance, melting resistance and excellent electrical conductivity.Protecting circuits and electrical equipment..
  • ♪ Waterproof Protection---Unique design of dual slot tight-fitting waterproof lid to enhance moisture-proof, waterproof performance and dust proof..
  • ♪ Heavy Duty 18 AWG Fuse Holders, Protecting circuits and electrical equipment. Easy to add additional circuits for cars, CD players, fax machines and etc..
  • ♪ Easy Installation: Insert your fuse to the holder or you can change different votage fause,close the cover and then connect the fuse holder to the circut.
  • ♪ Package Included: 2 X Mini Blade Fuse Holder and 2 X 5A Mini Blade Fuse.
Check Stock

10ga Fuse Holder 2 Pack MUYI Inline Fuse Holder 10 Gauge Fuse Holders 12v Waterproof Pigtail Blade Fuse Relay with 40AMP ATC Fuses

  • 10 AWG thick red pigtail wire allow you to splice it into any project..
  • Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm.
  • Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. NOT easy to fall off or let water in..
  • Inline Fuse Holder for standard blade fuses, Suitable for 1A,2A,3A,5A,7.5A,10A,15A,20A,30A,40A, ideal for car truck trailer atv boat marine.
  • Package Included: 2 X Standard Blade Fuse Holder and 2 X 40Amp Standard Blade Fuse.
Check Stock

FEBRYTOLD 10 Gauge Inline Fuse Holder - 2 Pack Fuse Holder Waterproof Pigtail Fuse Relay with 2 Pack 30AMP Blade Fuse & 2 Pack 40AMP Blade Fuse for Car Truck Boat Motorcycle

  • 【Widely Application】The fuse holder is suitable for ATC/ATO standard blade fuse of 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 40A. Widely used for boat,....
  • 【High-quality】The heavy duty 10 gauge (AWG) tin-plated copper wire is made of high quality material with good electrical conductivity and melting....
  • 【Easy to use】Directly plug to the existing fuse holder without splicing or cutting. Keep your car and electric device in a safe condition.With 30A....
  • 【Waterproof Design】The fuse holder with tight-fitting rubber cap, can maximum prevent water, dust, and dirt from getting in.
  • 【Package】2×10 gauge fuse holder, 2×30A blade fuse, 2×40A blade fuse.
Check Stock

Etopars Car Vehicle Auto 6 Way Circuit Standard ATO Blade Fuse Box Block Holder 12V 24V

  • With transparent cover for dust and moisture protection..
  • Automotive fuse box, suitable for middle-sized blade fuses..
Check Stock

MCIGICM 12 AWG Inline Fuse Holder with 30A ATC/ATO Blade Fuse 5 Pack

  • Heavy duty 12AWG wire, better protection to the circuit..
  • Wire length: 8.7 inches 12 gauge wire each side, Fuse holder dimension: 41x35x15mm.
  • Fits for 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A ATC/ATO blade fuse..
  • The rubber cap fits on tightly to protect any standard blade fuse inside..
  • Package included 5 x fuse holder & 5 x 30A blade fuse..
Check Stock

MulWark 2 Pack 10 Gauge Tinned Copper Marine Wire Waterproof IP67 Inline Fuse Holder Pigtail Blade Fuse Block Relay with 40AMP Automotive Fuses Set for Car Truck ATV Boat Motorbikes

  • PACKAGE INCLUDED: 2 x standard inline fuse holders and 2 x 40Amp standard blade fuse. Our car fuse can be easily identified by the white mark amp rating figures on the top and allows checking top pins for continuity.
  • SAFETY PROTECTION: The heavy-duty 10 gauge (AWG) tin-plated copper wire features an excellent oxidation resistance that adds protection to the circuit of your car alarms, GPS, car recorder, dashboard camera, VCD player, etc.
  • WATERPROOF DESIGN: The gauge fuse holder is equipped with a tight-fitting, waterproof rubber cap with IP67 waterproof rating for maximum prevention of water, dust, and dirt from getting in.
  • PREMIUM QUALITY WIRE: High-quality soft red pigtail silica gel wire makes it easier to strip than other materials. What’s more, the 30cm wire length ensures convenient installation on almost all kinds of automotive devices.
  • WIDE APPLICATION: Support ATC/ATO standard blade fuse of 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 40A, easy to use and ideal for car truck, boats, RVs, ATVs, Jeeps, Motorcycles, and much more.
Check Stock

MCIGICM Fuse Holder 10 Gauge Inline Fuse Holders 10 AWG Waterproof with 40 Amp Fuse 3 Pack

  • Heavy duty 10AWG wire, better protection to the circuit..
  • Wire length: 6 inches 10 gauge wire, Fuse holder dimension: 41x35x15mm.
  • Fits for 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 40A ATC/ATO blade fuse..
  • Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside..
  • Package included 3 x 10 gauge fuse holder & 3 x 40A blade fuse..
Check Stock

Nilight - 50029R 120 Pcs Standard Blade Fuse 5A/7.5A/10A/15A/20A/25A/30A AMP Assorted Set with 10 Pack 14AWG ATC/ATO Inline Fuse Holder 2 Years Warranty 1 Count Pack of 10

  • Standard Blade Fuse: 0. 75 x0. 74 x0. 3 Inch. Fuse Type: Blade. Material: Zn alloy/Plastic. Protect your car and your electrical device from short circuit, overload etc.Material:plastic.
  • 10 Pack In-Line Fuse Holder: Heavy duty 14 gauge (AWG) red color wire, great look and added protection to the circuit..
  • Safety Protection: Unique design of the dual slot tight-fitting waterproof lid to enhance moisture-proof and waterproof performance. It's no doubt that this is an inline fuse holder extremely safe and reliable. Easy to use: Turn one fuse slot into two while providing protection for both circuits.
  • Suitable Fuses: Fits for 1A, 2A, 3A, 4A, 5A, 7. 5A, 10A, 15A, 20A, 25A, 30A ATC/ATO blade fuse of 19. 1 × 18. 5 × 5. 1 mm.
  • Package Include: 10 x 14AWG ATC/ATO Inline Fuse Holder and 120 PCs standard blade fuse+Puller.
Check Stock

YUNPICAR Mini Blade Fuse Holder 18 AWG Waterproof Connector Inline Fuse Holder with 5A ATM Fuses,2 Pack

  • Standard ATS 5A Blade Fuse ,Protecting circuits and electrical equipment. Easy to add additional circuits fit for cars, CD players, fax machines and etc..
  • High-quality :Fuse holders wiring harness select Tin plated copper as conductor to ensure its good bending performance, melting resistance and excellent electrical conductivity..
  • Easy to use:Just directly plug to the existing fuse holder, 18 AWG 9.4in red pigtail wire allow you to cut and splice it into any project. Keep your car and electric device in a safe condition.
  • Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. To enhance moisture-proof and waterproof performance and NOT easy to fall off or let water in.
  • Package Included: 2 X Mini Blade Fuse Holder and 2 X 5A Mini Blade Fuse.
Check Stock

Inline Fuse Holder 10 Gauge - 4 Pack Waterproof Inline Fuse Holder with 4 Pack 30AMP Blade Fuse & 4 Pack 40AMP Blade Fuse for Car Boat Motorcycle Truck

  • ➤PREMIUM QUALITY:The heavy duty 10 gauge tin-plated copper wire is made of high quality material with good electrical conductivity and melting....
  • ➤WIDE APPLICATION:Fits for ATC/ATO standard blade fuse of 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 40A. Widely used for boat, RV, car, truck,....
  • ➤EASY TO USE:Just directly plug to the existing fuse holder without splicing or cutting. Keep your car and electric device in a safe condition.With....
  • ➤EXCELLENT WATERPROOF DESIGN:The fuse holder with tight-fitting rubber cap, can maximum prevent water, dust, and dirt from getting in.
  • ➤PACKAGE INCLUDED:4×10 gauge fuse holder, 4×30A blade fuse, 4×40A blade fuse.
Check Stock

Standard Blade Fuse Holder & Fuse Kit - Muhize Fuse Tap 12V Car Add-a-circuit Fuse TAP Adapter Fuse Holder with 5 Amp Standard APR ATO ATC Blade Fuse (5 Pack)

  • PACKAGE INCLUDE - MuHize 5 x Add-A-Circuit fuse holder with heavy duty 16 gauge red color wire + 5 x 5 AMP Standard blade fuse..
  • DUAL-SLOT FUSE HOLDER - It provides one fuse holder to protect original circuit and provides a lead with the second fuse holder for new circuit..
  • EASY TO USE - Plug into an existing fuse holder. Easy to install the additional circuits without splicing or cutting..
  • WIDELY APPLICATION - MuHize assorted add a circuit Fuse Tap Adapter kit commonly fits for Standard blade fuses (rating 2Amp-20Amp), Perfect for car alarm, cell phone charger, GPS, DVD player, dash cam, etc.
  • HIGH QUALITY - 100% brand new & made from excellent materials, good electrical conductivity, and melting resistance..
Check Stock