Top Automotive Hydraulic Jack

UERST Transmission Jack Lift 1100lbs 2 Stage Capacity Adjustable Height Hydraulic Transmission Jack 360° Swivel Wheel Lift Hoist

  • The telescoping transmission jack is built in ISO certified facilities and engineered using the same systems as Aerospace Technologies and the Automotive OEM sector. This jack is also tested for reliability and safety, meets ASME safety standards..
  • The sturdy base increase 2 brakes for 4 heavy-duty 360º swivel casters to prevent the sliding during use. Adding effortless maneuverability. Once your jack is in place, the smooth, manual-operated hydraulic system makes easy work of lifting and lowering. Slow release valve (knob above the foot pedal) that enables the user to slow the rate of descent as needed..
  • Frame is constructed of high-grade steel and built to exacting standards for quality and durability. Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust. Paint is oil, grease and dirt-resistant for easy cleanup. Piston-ram is treated and polished to resist skiving..
  • High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to move the load, which helps to reduce wear and extend service life..
  • Reinforced springs with 1100lbs load capability for greater lift range, precise load control and rapid lift. Upgrade 2 pull rings to help you reset 2 stage t....
Check Stock

OEMTOOLS 24836 Hydraulic Floor Jack, 3-1/2 Ton Capacity, Car Jack Hydraulic Lift, Foot Pedal for Quick Vehicle Lift, Rapid Pump Jack, Rear Swivel Casters

  • HIGH-CAPACITY AUTO JACK: This hydraulic car lift is designed to lift 3-1/2 tons with minimal effort.
  • Reliable car floor jack, truck jack, SUV jack, and RV jack.
  • Lift jack not designed to support vehicles.
  • FAST LIFT FUNCTIONALITY: Our quick car jack includes a foot pedal for faster setup.
  • Excellent shop floor jack or garage floor jack for increased productivity.
  • Get to work servicing vehicles much faster with these floor jacks.
  • RAPID PUMP FLOOR JACK: This vehicle jack features a fast action dual pump design for quicker car lifting.
  • Heavy duty car jack makes it easy to lift and service standard vehicles.
  • Get the job done on time with this fast jack.
  • EASY TO MANEUVER: Our automotive floor jack comes with 360 degree rear swivel casters, making it an easy car jack to maneuver from vehicle to vehicle in your shop or garage.
  • PRODUCT SPECIFICATIONS: Weight Capacity: 3-1/2 Tons.
Check Stock

ABN 3-in-1 Electric 3-Ton Car Hydraulic Floor Jack, Tire Inflator Air Pressure Gauge, Impact Wrench Automotive Service

  • STAY SAFE IN ANY ROADSIDE EMERGENCY: We all hope the day never comes, but if you get stuck with a roadside emergency, the ABN 3-in-1 Electric 3-Ton Car Hydraulic Floor Jack, Tire Inflator Air Pressure Gauge, Impact Wrench Automotive Service is a quick and easy car repair toolkit solution for all of your troubles.
  • ELECTRIC IMPACT WRENCH: Includes fuse, 2 chrome vanadium steel (CR-V) wheel nut socket adapters 17-19mm 21-23mm, and 11.5-foot (3.5m) long power cable with a 12V auto cigarette lighter adapter.
  • 12V DC with 12A maximum current, 100W rated power, 340N.M maximum torque.
  • 2-IN-1 ELECTRIC HYDRAULIC JACK/INFLATOR: Jack – Self-locking, 12V DC input, 150W rated power, 13A max current, 15A fuse, 11.5ft (3.5m) power cable, 3-Ton (2.7MT) loading weight, 6.1-17.7in (15.5mm-45mm) lifting height, 5°F to 122°F (-15°C-50°C) working temp.
  • Inflator – Needle heads, 12V cigarette lighter fuse, six-angle spanner.
  • 12V DC input, 35L/min inflating speed, 10A max current, 150 PSI (10 BAR) max pressure, 23.6in (60cm) air hose length.
Check Stock

VEVOR Transmission Jack,3/5 Ton/1322 lbs Capacity Hydraulic Telescopic Transmission Jack 2-Stage Floor Jack Stand with Foot Pedal 360° Swivel Wheel Garage/ Shop Lift Hoist Red

  • 1322 LBS Loading Capacity: Our 1322 lbs / 0.6 ton 2-stage hydraulic telescoping transmission jack helps you easily guide a transmission securely. Great for any automotive or light truck transmission installation or removal. See where the problem is and solve it with a quality transmission jack..
  • 33-1/2" -67" Lifting Range: Enhanced hydraulic pressure for an extended lifting range, the pedestal transmission jack with a 33-1/2 inch to 67 inch lift range, our jack can lift your car to any suitable height. Comes with a foot-operated pedal, so it's easier to rise, and free up your hands..
  • Precise Positioning: Adjustable saddle provides a wide tilt range that helps you get the load in the perfect position. The tray can be tilted 30-degree. Adjust the angle and place you need by screwing the adjustment bolts. Set yourself up for success, control where you want to be and how you want to get the job done..
  • Easy to Move: Features 4 pcs swivel casters, so there is no need to worry about how to transport it to another car. An auxiliary ring is fixed at the middle of the jack, making it convenient for your hands to push or pull when you move it..
  • Premium High-Grade Steel: Durable frame is constructed of high-grade steel for quality and durability. A wide ba....
Check Stock

OEMTOOLS 24835 Hydraulic Floor Jack, 2.5 Ton Low Profile Automotive Jack, Quick Vehicle Lift Up to 14 Inches, Portable Hydraulic Lift, Fits Under Nearly Any Vehicle

  • HYDRAULIC CAR LIFT: The hydraulic jack is designed to lift 2.5 ton vehicles with minimal effort when performing services or maintenance work.
  • Hydraulic jack lift is built for performance and ease of use.
  • Valuable shop floor jack or garage floor jack.
  • LOW PROFILE FLOOR JACK: Our low profile car jack makes working with low-clearance vehicles much easier, getting under vehicles that standard hydraulic car jacks cannot fit.
  • These low profile floor jacks have a maximum lifting height of 14 inches.
  • SAFE TO USE: These floor jacks for cars, trucks, SUVs, and many other vehicles feature an overload system that prevents use beyond the rated capacity of 2.5 tons.
  • 2.5 ton floor jack can safely fit under and lift nearly any vehicle within its capacity.
  • PORTABLE CAR JACK: This car lifter jack comes with floor jack casters for convenient portability.
  • Heavy duty floor jack features (2) 360 degree rear swivel casters for easy maneuvering.
  • Easily transport this portable car lift around your garage.
  • PRODUCT SPECIFICATIONS: (1) Vehicle Hydraulic Jack.
  • (2) 360 Degree Rear Swivel Casters and (2) Large Front Casters.
Check Stock

Pro Lift Low Profile Transmission Jack - Heavy Duty Roll Under Floor Jack High Lift from 9 to 24 inches with 1100 Lbs (1/2 Ton) Capacity for Car Light Truck

  • Pro -Lift Transmission Floor Jack with 1100 lbs capacity is designed to be used as an aid in the removal and installation of automotive and light truck transmissions, transfer cases and transaxles..
  • The adjustable head can be tilted forward, backward and side to side for optimum alignment of transmission bolt patterns and pins.
  • Hydraulic system is protected from internal damage by a patented by-pass mechanism. Rugged steel wheels and full swivel ball bearing casters..
  • U.S. Patented built-in by-pass device protects hydraulic system from overpumping damage. Multi-adjustment knobs ensure that transmission cradle is always at the right angle to position and accept any load.
  • Load-restraining chain is vital for raising and lowering safety. Four wheel casters allow easy movement, positioning of transmission jack.
Check Stock

K Tool International 63103A 2 Ton Automotive Trolley Floor Jack for Garages, Repair Shops, and DIY, Portable, Compact, 4,000 lbs. Capacity, Hydraulic Lifting Range 5.125" - 13", Heavy Duty Steel, Red

  • [2 TON CAPACITY] - K tool International trolley jack rated to lift up to 2 tons or 4,000 lbs..
  • [LIFTING RANGE] - K Tool 2 ton trolley jack has a lifting range of 5-1/8" to 13". This trolley jack provides the opportunity for many automotive needs..
  • [BUILT-IN VALVE] - Valve prevents over-extension of hydraulic ram and jack use beyond rate capacity..
  • [DURABLE] - K Tool service jack is built for extra lifting and maneuverability for all load lifting needs. Heavy-duty steel construction provides stability and positioning..
  • [MANEUVERABILITY] - Swivel rear casters and saddle provide smooth maneuvering and positioning.
Check Stock

1100 LBS Transmission Jack 2 Stage Hydraulic with Pedal 360° Swivel Wheel Lift Hoist Adjustable Height Hydraulic Telescoping Transmission Jack Fit for Car Lift

  • ✔STRONG LOADING: Transmission jack holds up to 1100LBS / 0.5T weight and extends from 33"(850mm) to 70"(1790mm).
  • ✔PRECISE POSITIONING: An adjustable tray and the pedal type design of the hydraulic transmission jack enable you to position and align the transmission more precisely..
  • ✔EASY TO MOVE: 4 cast iron swivel casters and a auxiliary pulling ring help you move the jack for lift more easily..
  • ✔HIGH QUALITY: Strong steel construction for maximum durability, and paint coated surface for rust-resistance..
  • ✔APPLICATION: Any automotive or light truck transmission installation or removal and other objects weighing no more than 500KG..
Check Stock

TEMCo 3/8\ Female NPT Thread 3/8\ Body Pair Hydraulic Coupler ISO 7241B Poppet Valve Quick Connect for Tractors and Ag Equipment Fits Pioneer Parker Format - HF0078 (HF0076 + HF0077)

  • Oil Be Filled: 500g.Max Lifting Height: 5.31"/ 13.49cm.
  • Used for automotive, truck, farm and heavy equipment repair. Perfect for a variety of autobody repair, frame repair and construction jobs..
  • The load can not exceed the half of the capacity when all tubes used. The extension of the piston can net exceed the stroke.Completed Kit includes most commonly used equipment needed for Pulling Pushing, Lifting, Bending, Straightening & Spreading.
  • The whole hydraulic jack body tool kit is compact and complete for the best working performance. The portable case is included for easy storage. You can carry the tool kit more easily..
  • SHIPPING: US stock, fast shipping. We cooperate with Fedex to make sure you can receive the parcel within 5-10days.
Check Stock

E-HEELP Electric Car Jack 5Ton 12V Hydraulic Car Jack Kit with Electric Impact Wrench for SUV MPV Sedan Truck Change Tires Garage Repair

  • [Poweful Car Jack] Electric car jack is hydraulic driven, it can lift vehicles within 5 tons in less than 2 mins to its Max. height (lifting range: 6.1-17.7 inches). The high power engine installed in the hydraulic jack nearly matches all the autos, sedan, SUV, MPV, pickup and truck. The powerful hydraulic srenth is more competitive than an other car jacks..
  • [Change Tires Easily] Car jack hydraulic type can be supplied with two methods: cigar lighter and car battery. We recommend the car battery to our customers, the current would be more stable. Tire pumping inflator is installed in the floor jack, equipped with tire pressure display, you are able to monitor the tire pressure easily. If you are a guy who is not used to use normal car jack and has never changed a tire, you'll be amazed how easy and quick it is..
  • [Portable Impact Wrench] This electric car jack kit contains a portable ergonomic-designed electric impact wrench and two sleeves with two sizes, matching more vehicles in the market. Powerful motor and precisely-designed speed control system, making it possible to screw/unscrew in a very short time. This electric car jack kit can save you a lot of time....
Check Stock

AZMCNC 10 Ton Hydraulic Cylinder Ram Single Acting 4\ Inch Stroke Hydraulic Cylinder Jack Lifting Jack Ram Portable Single Acting Lifting Cylinders with 100mm Stroke

  • Connector Type: 3/8" NPT CR-400 quick hydraulic coupler with dust cap.
  • Max Pressure 10,000 PSI. Single acting - Pressure extend, Spring return..
  • Hard black oxide plated high carbon steel ram. Proprietary heat-treated steel shell..
  • This hydraulic jack cylinder has the advantages of small size, suitable for narrow space position. A great helper for riggers, fabricators, welders, and automotive body and frame shops in electric power, chemical industry, steel, Bridges, machinery, and other industries..
Check Stock

AMZCNC 10 Ton Hydraulic Cylinder Ram Single Acting 2\ Inch Stroke 10T Hydraulic Cylinder Jack Lifting Jack Ram Portable Single Acting Lifting Cylinders with 50mm Stroke

  • Connector Type: 3/8" NPT CR-400 quick hydraulic coupler with dust cap.
  • Max Pressure 10,000 PSI. Single acting - Pressure extend, Spring return..
  • Hard black oxide plated high carbon steel ram. Proprietary heat-treated steel shell..
  • This hydraulic jack cylinder has the advantages of small size, suitable for narrow space position. A great helper for riggers, fabricators, welders, and automotive body and frame shops in electric power, chemical industry, steel, Bridges, machinery, and other industries..
Check Stock