Top Automotive Hydraulic Oil

CNC Mountain Bike V Brake Set, Bicycle V Brake for Front/Rear，1Pair

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

Mophorn Air Hydraulic Pump 10000 PSI Air Over Hydraulic Pump 1/2 Gal Reservoir Air Treadle Foot Actuated Hydraulic Pump 3/8\ NPT with 6 ft Hose 2 Connector Single Acting for Car Repair (Blue)

  • Fundamental Parameters: The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 103 cubic inches / 1.7 liters(1700 cc), 0.45 gallons, Max Input Air Pressure: 120 psi / 8 bar, Fuel Tank Capacity: 1.6L ± 0.1L, Maximum Oil Output: 1.3L, Oil Output Pressure: 75mpa..
  • Foot-Actuated Design: The air hydraulic pump adopts a user-friendly foot-actuated design to provide hands-free operation for pumping and releasing the load, saving the operator's time and effort with strong power and high output pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
  • Sturdy & Compact Construction: This air hydraulic foot pump features an aviation aluminum pump core and a high-quality metal shell to handle tough industrial applications. 1.6L ± 0.1L oil tank has a larger capacity with 103 cubic inches / 1.7 liters output oil. Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
  • Durable Oil Pipe Included: This hydraulic air pump is equipped with a 6.5 ft / 2 m hi....
Check Stock

Sterling Seal ORBN022x50 Number-022 Standard O-Ring, Buna Nitrile Rubber, 70 Durometer Hardness, 1' ID, 1-1/8' OD (Pack of 50)

  • For use across a wide temperature range from -30 degrees F to 250 degrees F, Good/Excellent resistance to many petroleum oils/greases, hydraulic fluids, alcohol, mineral oil and grease.
  • Oil resistant applications of all types. Low temperature military uses. Off-road equipment. Automotive, marine, aircraft fuel systems. 70 Durometer.
  • Compatible with Aliphatic Hydrocarbons (propane, butane, petroleum oil, mineral oils and greases, diesel fuel and fuel oil).
  • Not Compatible with product fuels with a high aromatic content.
  • Chlorinated hydrocarbons (Trichloroethylene).
  • Buna N or Nitrile has good mechanical properties when compared with other elastomers and high wear resistance.
Check Stock

Keadic 470Pcs 18 Metric Sizes Automotive Washer Assortment Aluminum - M6 M8 M10 M12 M14 M16 M18 M20 M22 M24

  • ☘️〖1. What You Will Get〗 -- You could get total 470pcs Washers from this Automotive Aluminum Washer Assortment Kit, including 18 Metric sizes: M6*10*1mm, M6*12*1, M8*12*1, M8*14*1, M10*14*1, M10*16*1, M12*16*1, M12*18*1.5, M14*18*1.5, M14*20*1.5, M16*20*1.5, M16*22*1.5, M18*22*1.5, M18*24*1.5, M20*26*1.5, M22*27*1.5, M22*29*2, M24*29*2. Widely meet your various home DIY demands. In addition, all of these items are packed in a sturdy case with specification label, easy for your storage and use!.
  • ☘️〖2. High Quality Material〗 -- These Automotive Washers are made of high grade aluminum and components are built to last..
  • ☘️〖3. Multi-functional Application〗 -- These washers are suitable for automotive or electrical applications such as oil lines, hydraulic fittings, oil drains, etc. The washer could be used for fixing pipes with smaller diameter than the hole of washers..
  • ☘️〖4. Well Made & Great Value〗 -- Our Washers are well made, with smooth and shiny suface, which looks very attractive. Most importantly, they are cheaper than most of replacements in the hardware market, you are worth to get these nice bargains!.
  • ☘️〖5. 100% Satisfaction Assurance〗 -- If there are any issue you come across with our products, feel free t....
Check Stock

VEPURLT Air Hydraulic Pump 10,000PSI, Air Hydraulic Foot Pump 1/2 Gal Reservoir, Air Foot Pedal Hydraulic Pump with Hose for Hydraulic Bead Breaker

  • 【Basic Info】 -The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 98 Cubic. Connector Type: 3/8" NPT quick hydraulic coupler with dust cap.
  • 【Trustworthy Security】-The air hydraulic foot pump is built-in internal relief valve, which protects the hydraulic components regardless of hydraulic pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock.
  • 【Powerful Energy】-This air powered hydraulic pump is an ideal all-around power source, for use with a variety of rams, presses, & hydraulic pullers, that develops 10,000 PSI hydraulic pressure at 100 PSI air pressure.
  • 【Matching Accessories】-Equipped with a 4ft high-pressure oil pipe that features double protection of embedded steel wires and thickened outer layer. The oil port is made of cast steel, durable and reliable. A spray gun is included to control the input and interru....
Check Stock

Mophorn Air Hydraulic Pump 10000 PSI Air Over Hydraulic Pump 1/2 Gal Reservoir Air Treadle Foot Actuated Hydraulic Pump 3/8\ NPT with 6 ft Hose 2 Connector Single Acting for Car Repair (Orange)

  • Fundamental Parameters: The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 98 Cubic Inches / 1.6 Liters(1600 cc), Max Input Air Pressure: 120 psi / 8 bar, Fuel Tank Capacity: 1.6L ± 0.1L, Maximum Oil Output: 1.3L, Oil Output Pressure: 75mpa..
  • Foot-Actuated Design: The air hydraulic pump adopts a user-friendly foot-actuated design to provide hands-free operation for pumping and releasing the load, saving the operator's time and effort with strong power and high output pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
  • Sturdy & Compact Construction: This air hydraulic foot pump features an aviation aluminum pump core and a high-quality metal shell to handle tough industrial applications. 1.6L oil tank has a larger capacity with 98 cubic inches / 1.6 liters output oil. Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
  • Oil Pipe & Spray Gun Included: This hydraulic air pump is equipped with a 1.25 m / 4 ft high-pressure oil pip....
Check Stock

RELMON 2Pcs Silicone Car Battery Heater Pad, 4 x 5 Inch Oil Pan Heater Pad Engine Block Heater Pad

  • The silicone car battery heater pad can bring the oil to the right temperature and reduce oil consistency, effectively lubricating the engine better and reducing its wear..
  • It is made of hard-wearing silicone, which is waterproof and oil-proof to ensure a long service life with low temperature resistance and durability..
  • The 150W/120V heater pad is suitable for automotive parts with metal surfaces, such as oil, hydraulic, transmission fluids, etc..
  • It can prevent safety hazards caused by high temperatures with its built-in automatic thermal protector, keeping the heating temperature at a constant 194°F/90°C..
  • Convenient to use and carry with its 4x5 inch size. Please do not put it on any plastic surface on your engine to keep it from burning up..
Check Stock

KUNTEC 470Pcs 18 Sizes Automotive Metric Drain Plug Gaskets Aluminum Flat Washers Assortment Kit M6 M8 M10 M12 M14 M16 M18 M22 M24

  • Sizes: M6 M8 M10 M12 M14 M16 M18 M22 M24. Aluminum Washers contains total 470 pieces/18 sizes of the most commonly used aluminum washers to meet your different needs.
  • Material: Drain plug gaskets are made of advanced aluminum materials, light weight, high hardness, not easy to rust, non-deformation, wear - resistant and corrosion resistant.
  • Advantage: Featured with surface brushed treatment, smooth surface could reduce friction between fasteners.
  • seal tight prevent leakage, isolates, prevents loosening or dispersion pressure..
  • Application: Aluminum washers are designed for automotive or electrical applications such as oil lines, hydraulic fittings, oil drain. They are durable for use and have a tighter seal than rubber washers..
  • Storage: Automotive drain plug gaskets are packed in a durable transparent box with label. It is easy to distinguish the size of the product, you can choose the suitable one that you need..
Check Stock

UERST Transmission Jack Lift 1100lbs 2 Stage Capacity Adjustable Height Hydraulic Transmission Jack 360° Swivel Wheel Lift Hoist

  • The telescoping transmission jack is built in ISO certified facilities and engineered using the same systems as Aerospace Technologies and the Automotive OEM sector. This jack is also tested for reliability and safety, meets ASME safety standards..
  • The sturdy base increase 2 brakes for 4 heavy-duty 360º swivel casters to prevent the sliding during use. Adding effortless maneuverability. Once your jack is in place, the smooth, manual-operated hydraulic system makes easy work of lifting and lowering. Slow release valve (knob above the foot pedal) that enables the user to slow the rate of descent as needed..
  • Frame is constructed of high-grade steel and built to exacting standards for quality and durability. Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust. Paint is oil, grease and dirt-resistant for easy cleanup. Piston-ram is treated and polished to resist skiving..
  • High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to move the load, which helps to reduce wear and extend service life..
  • Reinforced springs with 1100lbs load capability for greater lift range, precise load control and rapid lift. Upgrade 2 pull rings to help you reset 2 stage t....
Check Stock

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers Mechanical Disc Brakes for MTB Mountain Bike E-bike and Electric Bike 2PCS Front/Rear Gold

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

Happybuy 10152 PSI Hydraulic Electric Pump 750W Single Acting 110V Solenoid Pedal 7L Hydraulic Power Pack Cylinder

  • Efficient Motor: Equipped with a single-phase asynchronous motor, 750W, with aluminum shell, this electric hydraulic pump is energy efficient, powerful, and durable. Hydraulic pump working pressure: 2Mpa to 70Mpa. Rotate speed:1400r/min. Flow rate: 0.9L/min - 5L/min..
  • Large Capacity Tank: With a large fuel tank capacity, 7L, the hydraulic power pack is efficient. A visible window for monitoring the inside. The hydraulic pump tank uses the 15th hydraulic oil. It has the advantages of compact size, lightweight, and simple structure..
  • Accurate Pressure Gauge: This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the pump is working at any time. From 2Mpa to 70Mpa, you can try slowly and choose the right working pressure you need..
  • Effective Oil Volume: Manage this single acting electric oil pump by a lever which has a rubber cap in one end for a comfortable grasp and use. The high-pressure oil pipe is of high quality and durability. The oil pipe coupling is fitted with an M10 thread. Connector Type: 3/8" NPT ISO 14540 quick hydraulic coupler with dust cap..
  • Various Application: The pump can be used for a variety of hydraulic equipment, working on several assignments such as lifting, pressing, bending,....
Check Stock

10000 psi Hydraulic Hand Pump 2 Speed Power Pack Hydraulic Lifting Pump

  • Maximum operating pressure of 10,000 pounds per square inch (psi)，Two-speed Plunger Improves Pump Efficiency By 70%.
  • Advances and releases design for applications with a constantly applied load Pressure relief valve (Oil return knob)helps prevent pump overload, switch( venting nut) on the tail of it avoid sealed of oil box.
  • Oil capacity: 700cc, 2M high pressure hose ，oil pipe coupling with PT3/8 thread.
  • Manual Hydraulic Pump is durable, smooth surface and good sealing performance. Integral Casting Pump Body, Durable, Stable And Reliable.
  • High-pressure hydraulic hand pump for 5 ton to 200 ton hydraulic ram cylinders or split unit hydraulic puller and other hydraulic applications.
Check Stock