Top Automotive Performance Clutch Pilot Bushings

Southwest Speed New 55-57 Chevy Factory Replacement Nylon BUSHINGS for The Clutch Pedal Cross Shaft TRI-5 1955 1956 1957 150 210 BEL AIR Nomad Sedan DELIVERY DEL RAY

  • Brand New Pair of Southwest Speed Factory Replacement Nylon Bushings for the Clutch Pedal Cross Shaft that fits all 1955-1957 Chevy Passenger Cars....
  • This pair of Southwest Speed nylon bushings mount on each each of the clutch pedal cross shaft sleeve under the dash, and are a reproduction of the....
  • If you are doing a restoration of a 1955-1957 Classic Chevy or just the want the correct part then you have came to the right place > NOTE: This....
  • Features: > 5/8" I.D. > Includes a Pair > Mounts on each end of the cross shaft sleeve under the dash > Factory Reproduction > Nylon Bushings.
  • Applications: > 1955-1957 Chevy Bel Air > 1955-1957 Chevy 150 > 1955-1957 Chevy 210 > 1957 Chevy Del Ray > 1955-1957 Chevy Nomad > 1955-1957 Chevy....
Check Stock

Arctic Cat 1 Quart ACX 0W-40 Synthetic Oil 2436-858 4 Cycle All Weather Formula

  • Advanced multigrade 4-cycle all weather formula.
  • Superior rust and corrosion protection even during periods of nonuse.
  • Offers maximum engine performance along with unique shear-stable additive formula that protects against engine wear, carbon buildup and sludge formation.
  • ACX is wet-clutch certifi ed for use in Arctic Cat Off Road wet-clutch engines.
  • Automotive engine oils DO NOT meet the requirements for use in Arctic Cat Off Road ATVs equipped with a wet clutch.
Check Stock

NEW 55-57 CHEVY FACTORY REPLACEMENT CLUTCH PEDAL CROSS SHAFT BOLT AND BUSHING KIT PUSH ROD TRI-5 1955 1956 1957 150 210 BEL AIR NOMAD SEDAN DELIVERY DEL RAY

  • Brand New Southwest Speed Factory Replacement Clutch Pedal Cross Shaft Bolt and Bushing Kit that fits 1955-1957 Tri-Five Chevy's with Manual....
  • This Southwest Speed clutch pedal cross shaft bolt and bushing kit are a reproduction of the original clutch pedal push rod bolt and bushing used on....
  • This kit includes a steel shoulder bolt, two delrin bushings, 3 flat washers, and an nylon locking nut > The shoulder bolt and bushings will look,....
  • Features: > Steel shoulder bolt with black oxide finish > Factory reproduction > Corrosion-resistant lock nut with nylon insert > Required for....
  • Applications: > 1955-1957 Chevy Bel Air > 1955-1957 Chevy 150 > 1955-1957 Chevy 210 > 1957 Chevy Del Ray > 1955-1957 Chevy Nomad > 1955-1957 Chevy....
Check Stock

Compressor Clutch Hub5N0820803, Stainless Steel Material Automotive Air Conditioning Plate Compressor Clutch Hub Fit for CVC

  • Scope of application: Clutch Hub Plate is suitable for CVC. OE: 5N0820803. Detailed application model, please check carefully before buying..
  • high quality materials: Clutch Hub Plate is made of high quality stainless steel, which is more wear resistant and durable. Professional manufacturing, high performance..
  • Professional design: Clutch Hub Plate is manufactured in accordance with standard specifications and strictly follows factory quality control..
  • Easy to install: Clutch Hub Plate is easy to assemble and disassemble. A professional installation is strongly recommended to avoid trouble or damage..
  • Product packaging: 1 x CVC Automotive Air Conditioning Plate, 3 x Short Screws, 1 x Long Screw..
Check Stock

ClutchMaxPRO Performance Stage 2 Clutch Kit Compatible with 1994-2001 Acura Integra 1999-2000 Honda Civic Si 1994-1997 Civic Del Sol VTEC 1997-2001 CR-V B16 B18 B20 CP08026HD-ST2

  • PREMIUM CLUTCH YOU CAN FEEL AND TRUST: ClutchMaxPRO is defining a new meaning of affordable performance clutch. It is simply the best bang and quality....
  • HORSEPOWER RATING AND TORQUE CAPACITY: 297 HP / 268 lb-ft, Suitable for daily driving, performance street driving and moderate track use..
  • KIT INCLUDES: Performance HD Pressure Plate, Performance HD Stage 2 Carbon Kevlar Infused Disc (8-5/8" x 1-1/16" x 24 spline), Release Bearing, Pilot....
  • LIMITED WARRANTY: All ClutchMaxPRO products comes with excellent customer support and limited manufacturer warranty of 12 months or 15,000 miles that....
  • THE FOLLOWING PRODUCT IS COMPATIBLE WITH: 1994-2001 Acura Integra (1.8L DOHC 4cyl B18), 1999-2000 Honda Civic Si (1.6L DOHC 4cyl B16), 1994-1997 Honda....
Check Stock

Powerbuilt Alltrade 648649 Kit 21 Clutch Pilot SAE/MM Tool Set Silver

  • Made to be the most reliable tools in the market today.
  • Tool set for aligning clutch components when installing a new clutch.
  • Aligns clutch plate and disc to pilot bearing.
  • Includes tapered cone clutch plate adapter and centering shaft.
  • Adapters included: 1.18/0.984-Inch, 17/15mm, 15.8/12mm, 0.874/0.812-Inch, 0.787/0.749-Inch, 0.718/0.668-Inch, 0.624/0.614-Inch and 0.590/0.561-Inch.
  • Kit 21 includes 8-Piece for aligning clutch components when installing a new clutch.
Check Stock

SR Performance Clutch Alignment Tool; 10 Spline

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 1-3/4 inch O.D. shaft, 1 inch pilot, 10 splines.
Check Stock

Tooth Clutch - 1.7500 in Bore, Shaft Mounted, Air Engaged/Spring Release, Open Design, 1/8 NPT, Finished w/Keyway & 2 SS, Flange Mount

  • pilot or drive flange bolt circle data: 4, 0.375-16 Holes @ 90 on a 5.687 inch B.C..
Check Stock

Dorman 14505 Clutch Alignment Tool Compatible with Select Models

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.
Check Stock

Tooth Clutch - 50 mm Bore, Shaft Mounted, Air Engaged/Spring Release, Open Design, 1/4 NPT, Finished w/Keyway & 2 SS, Pilot Mount

Check Stock

Nexen 805250 L-600 Shaft Mounted Clutch

  • Bore Size: 1.125 in. or 0 - 1.0 With Bushings.
  • Drive Arrangement: 2-A, 4.40 in. PD Sheave.
  • Standard Coefficient Clutch Facing Type and Open Design.
Check Stock

Tooth Clutch - 1.6875 in Bore, Shaft Mounted, Air Engaged/Spring Release, Open Design, 1/8 NPT, Finished w/Keyway & 2 SS, Pilot Mount

Check Stock