Top Automotive Textile

GOONSDS Ceramic Rods - Alumina Ceramic Rods Have Corrosion Resistant Smooth Surface, 1Pcs,6mmx300mm

  • A variety of sizes for you to choose,Diameter: 5mm,6mm, Length: 300mm / 11.8inch..
  • Alumina ceramic rods have good toughness, high strength, stable structure, smooth and bright surface, uniform stress, good electrical properties and low thermal conductivity..
  • Widely used in the manufacture of piezoelectric components, ceramic capacitors, electrical components, solid electrolytic batteries, ceramic bearings, etc..
  • It has a wide range of applications, such as machinery industry, electronics, optical communications, automotive industry, electrical industry, chemical industry, textile industry, daily life and many other industries..
  • Humanistic service: Providing you with perfect products and better service is always our belief. There will be 24-hour online after-sales service personnel to do their best to solve the problems you encounter..
Check Stock

LBY 120pcs Wing Nuts M3/4/5/6/8 Wingnut Butterfly Wing Nuts Assortment Kit Hand Twist Tighten Ear Butterfly Nut 5 Sizes Carbon Steel Galvanized

  • 1. Wingnuts butterfly nuts, hand twist screw butterfly nuts..
  • Screw hole diameter:3mm,4mm,5mm,6mm,8mm..
  • M3 30 pieces,M4 30 pieces,M5 30 pieces,M6 20 pieces,M8 10 pieces, a total of 120 pieces..
  • 5.Use: widely used in machinery,chemical industry,construction, electricity, textile, sports equipment,paper,sewage treatment,automotive,medical equipment, chassis circuits, electronic equipment, communication equipment, ships etc..
Check Stock

Bevel Gear 1.5 Modulu 15/30 Teeth, Tapered Bevel Pinion Gear Hole Diameter 90 Degrees Tapered Bevel Motor Driving Metal Gear

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-18mm shaft hole, the key specs for this gear- 1:1 ratio, 2 Module, 20 teeth, 12mm shaft hole, M5 fixing hole with 4mm Keyway, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

BEMONOC Pack of 2pcs HTD 3M Round Rubber Timing Belts Closed-Loop 201mm Length 67 Teeth 15mm Width Industrial Drive Belts

  • Fiberglass Tensile Cord - High dimensional stability and maximum flexibility engineered and tested for highly wear resistant performance.
  • Nylon Tooth Cover - Durability and wear resistance, increased power capacity.
  • Timing belt efficient transmission, low noise, oil resistance, fatigue, inflexible, non-stretch, high precision, wear-resistant.
  • The belts are widely used in automotive, textile, machine tools, office machinery, power tools, household appliances, instrumentation equipment, packaging equipment machinery, mining, petroleum, chemical and so on..
Check Stock

2Pcs Tapered Bevel Pinion Gear Bevel Gears 14mm Hole 2 Module 20 Teeth for Hardware Mechanical Rotation

  • ✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
  • ✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
  • ✅【Easy to Use】The bevel gear set comes with two M5 screws and 1 spanner for simplicity and convenient use.Lower contact ratio between gears, higher load capacity..
  • ✅【20 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 2 module gear,20 teeth,90 degrees,14mm Hole Diameter..
  • ✅【Warm Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Check Stock

2Pcs Tapered Bevel Pinion Gear Bevel Gears 12mm Hole 1.5 Module 16 Teeth for Hardware Mechanical Rotation

  • ✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
  • ✅【16 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 1.5 module gear,16 teeth,90 degrees,12mm Hole Diameter..
  • ✅【Easy to Use】The bevel gear set comes with two M5 screws for simplicity and convenience to use.Lower contact ratio between gears, higher load capacity..
  • ✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
  • ✅【Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Check Stock

Boston Gear L149Y-G Bevel Gear, 2:1 Ratio, 0.500\ Bore, 16 Pitch, 32 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5mm, 6mm, 8mm shaft hole, the key specs for this gear- 1:1 ratio,1 module, 20 teeth, 5mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

PGFUN 2 Pcs 1.5M 20 Teeth 8/10/12/14/15/16mm Shaft Hole Tapered Bevel Gear 1: 1# 45 Steel 1.5 Module 90 Degree Steering Gear with M5 Fixing Hole (10mm)

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-16mm shaft hole, the key specs for this gear- 1:1 ratio,1.5 Module, 20 teeth, 10mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

INTSUPERMAI Color Matching Cabinet 4 Light Sources Calibration Charts Light Source Cabinet Textiles Printing Plastics Footwear Leather Color Assessment Cabinet Box 110V

  • Suitable for all industries and applications where there is a need to maintain color consistency and quality-e.g. Automotive, Ceramics, Cosmetics, Foodstuffs, Footwear, Furniture, Knitwear, Leather, Packaging, Printing, Inks and Textile.
  • Background color of light source is Neutral Grey of absorbance. In using lamp cabinet, prevent outer light from projecting on article to be checked. Don't place any unconcerned articles in the cabinet..
  • Can test metamerism (same color different chromatogram). Besides D65 light source, TL84, UV, and F/A light sources are available in this Lamp Cabinet for metamerism effect..
  • Through microcomputer, the cabinet can switch between different light sources in very short time to check color difference of goods under different light source..
  • This Color Assessment Cabinet can automatically save all records of the contents after power-down.Permanent record of each separate source name, frequency and switch using times..
Check Stock

Zep I.D Red Liquid Solvent Degreaser 55 Gal ONE 55 Gallon Large Drum - Business ONLY Delivered VIA Truck Removes oil grease dirt lubricants and tar from machinery parts molds and equipment

  • (ONE 55 Gallon Large Drum - Business ONLY, Delivered VIA Truck) Not for sale in CA, CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, NY, OH, PA, RI, regulated areas of UT & VA..
  • Effective solvent degreaser designed for use when rapid evaporation and no residue are necessary.
  • Formulated without chlorinated solvents such as 1,1,1-trichloroethane, perchloroethylene or methylene chloride and contains no ingredients that corrode metal surfaces.
  • Use to remove oil, grease, dirt, lubricants and tar from machinery parts, molds and equipment.
  • Perfect for automotive repair shops, HVAC contractors, textile companies, fabricated metal shops, cleaning and maintenance services, service stations and vehicle manufacturers.
Check Stock

304 Stainless Steel Butterfly Wing Nuts Metric M3 M4 M5 M6 M8 M10 Assortment Kit Fasteners Parts Butterfly Nut Wingnuts Butterfly Nuts 6 Sizes 45PCS

  • High Quality:These butterfly nuts are made of 304 stainless steel.Even in bad environment like high temperature,cold weather,and high humidity areas.They have superior corrosion,rust resistance and the excellence of oxidation resistance,which can ensure long time using..
  • Feature:This wing nut has a wing on each side that helps you to twist the nut by hand without any other tools..
  • Easy to install and remove:can be used repeatedly and you can fasten two parts(structures)together easily..
  • Convenient Box:All the small parts are packed in a transparent plastic box with compartments,which is convenient to carry,store or reuse as a backup kit..
  • Wide Applications:The nuts are widely used in machinery,petrochemical,telecommunications,chemical industry,construction,electricity,textile,sports equipment,paper,sewage treatment,marine,automotive and other industries..
Check Stock

Jienk 5Pcs Bulkhead Union 3/8\ x 3/8\ Tube OD Push to Connect Tube Fitting, PMM-3/8 Pneumatic Quick Connect Air Fitting

  • 【Bulkhead Design】Pneumatic Fittings is mainly used for air piping, pneumatic tools, do not need joint tools can realize the pipeline connecting or disconnecting the link. Excellent choice for through wall application..
  • 【Durable】The body made of strong thermoplastic (PBT) housings and the ferrule adopts zinc alloy. Operating pressure 0~145 Psi, high pressure resistance, corrosion resistance and a long service life..
  • 【Push Lock】Quick connect fittings easy to install and remove. Just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently..
  • 【Convenience】360°rotation. After installation, the tube direction can be changed easily. Help a lot with the alignment when piping the air line..
  • 【Application】Working temperature range: 32～140°F. Most commonly used in the field for low-pressure hydraulic and pneumatic systems such as Shop Air, General Industrial, Maintenance and Automotive Assembly, Aircraft Controls, Printing, Packaging and Textile. As well as moving parts such as air ride, air horns and air suspension system..
Check Stock