Top Axial Contact Bearing

RBC JHA15XL0 Thin Section Ball Bearing, Sealed, 4-Point Contact X-Type, 1.5\ Bore x 1.875\ OD x 0.25\ Width

  • X-type 4-point contact ball bearing for use where space is limited and moment loads are high.
  • Deep-groove geometry for high speeds and supporting both radial and axial loads.
  • 52100 steel races and bearing balls for durability and resistance to deformity under heavy loads.
  • Conforms to ABEC 1F precision standard for performance within a narrow range of variation.
  • Rubber seals to retain lubricant and for protection against contaminants.
Check Stock

SKF 22207 E/C3 Spherical Roller Bearing

  • Shaker screen two row spherical roller bearing suitable for applications that support radial and oscillating axial loads.
  • Machined brass cage spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise.
  • P5 precision outer ring with center lubrication groove and oil holes.
  • C4 radial clearance is larger than CN and C3 for applications where impact loads and vibration are severe, both the inner and outer rings are tight fitted, or thermal expansion is a factor.
  • Straight bore fits conventional cylindrical shafts.
Check Stock

uxcell 3204-2RS Angular Contact Ball Bearing 20x47x20.6mm Sealed Bearings 5204-2RS

  • Low maintenance design for Problem free operation.
  • Angular bearing contact allows for outstanding durability while supporting both Radial and axial loads.
  • Available in wide variety of types, designs, sizes, and materials.
  • Quality you can Count on. SKF has been making ball bearings for over 100 years.
Check Stock

DNJ TW500 Thrust Washer For 85-01 Chevrolet, Suzuki, Geo, Metro, Swift, Samurai, Sidekick, Sprint,1.0L-1.3L, L4, L3, SOHC, DOHC, Naturally Aspirated, Turbocharged

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

uxcell 7201AC Angular Contact Ball Bearing 12x32x10mm, Single Row, Open, 25° Contact Angle 5pcs

  • Axially asymmetric races with a 40 degree contact angle to support both axial and radial loads.
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision.
  • Polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise.
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants.
Check Stock

5202-2RS - Double Row Angular Contact Ball Bearing 15 mm x 35 mm x 15.9 mm Double Lip Seal

  • Axially asymmetric races with a 40 degree contact angle to support both axial and radial loads.
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision.
  • Polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise.
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants.
Check Stock

DNJ TW950 Thrust Washer For 88-04 Toyota, Lexus, Tacoma, Tundra, 4Runner, T100, Pickup, ES300, Camry, ES250, 2.5L-3.4L V6, DOHC, SOHC, Naturally Aspirated

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

Skateboard Bearings, 16 Pack Bearings Skateboarding with 16 Pack Spacers, Skate T Tool, L-Type Allen Key and Wrench 608-2RS Roller Double Rubber Sealed UIInosoo for Skateboard Longboard

  • Single-row radial ball bearing for applications that support radial and axial loads.
  • Conforms to the ABEC 1 precision standard for performance within a narrow range of variation.
  • Through-hardened 52100 bearing quality steel for optimum wear resistance.
  • steel cage evenly spaces balls for reduced friction, vibration, and noise.
  • Removable single lip contact seals on both sides to protect against contaminants and retain lubrication.
Check Stock

FK Bearings WSSX16T Spherical Bearing with Teflon, 1\ (1-3/8 Wide), 1 Pack

  • Two row spherical roller bearing suitable for applications that support high radial and oscillating axial loads.
  • Two-piece pressed steel window-type cage has high wear resistance and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Straight bore fits conventional cylindrical shafts.
Check Stock

Ebmpapst W2E200-HK38-C01 Cooling Fan Air Flow 606CFM Brand 225 80mm 230V 80W Axial Flow Fans

  • Blade material:Sheet steel,painted black.
  • Material of wall ring:Die-cast aluminum..
  • Min. ambient temperature / °C~Max. ambient temperature / °C:-40~80℃.
  • We are professional Fan supplier,All products are New original genuine. Please rest assured to purchase, About the product parameters , please check and understand them carefully ,if not please feel free to contact us, we are pleased with serve for you..
Check Stock

INA TWA1625 Thrust Roller Bearing Washer, Open End, Inch, 1\ ID, 1-9/16\ OD, 1/32\ Width

  • Axial bearing washer for use with INA TC-series axial needle roller bearings in applications where adjacent components cannot serve as raceways.
  • Through-hardened chromium steel for durability and resistance to deformity under heavy loads.
  • Ground raceway for higher speeds and greater running accuracy than unground raceways.
Check Stock

INA TWA1220 Thrust Roller Bearing Washer, Open End, Inch, 3/4\ ID, 1-1/4\ OD, 1/32\ Width

  • Axial bearing washer for use with INA TC-series axial needle roller bearings in applications where adjacent components cannot serve as raceways.
  • Through-hardened chromium steel for durability and resistance to deformity under heavy loads.
  • Ground raceway for higher speeds and greater running accuracy than unground raceways.
Check Stock