Top Axle Parts

3.5k-3500 Lb Capacity Trailer Axle Beam Only-Utility/RV/Boat (89\ Hubface-74 Spring Center)

  • Rockwell American Tandem 3,500 lb Electric Brake Trailer Axles - Running Gear Set (7,000 lb Capacity) - Made in the USA.
  • These Axles Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
  • This Tandem Axle Kit comes with: (2) 3,500 lb Capacity Electric Brake Axle with Hubs, Bearings, Lugs & Nuts (2 Year Warranty), (2) U-Bolt Kits, (1) Tandem Hanger Kit, (4) Double Eye Springs, (1) 32 oz Johnson Trailer Parts Insulated Mug.
  • 5 Lug on 4.5 Bolt Pattern (other bolt patterns available - Contact Johnson Trailer Parts).
  • Replaces Dexter, Al-ko & TK Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture - Search "Johnson Trailer Parts or Rockwell American" in Amazon Search Bar for more Trailer Parts.
Check Stock

Chorme Spun Blade Spinning Front Axle Nut Cover Cap Nut Cover for Harley

  • Aftermarket replacement parts conceal your front axle hardware for an exclusive skull look.
  • Easy to install, Give the front axle a nice touch that said an improvement over the stock axle exposed.
  • Kindly Remind: Please check the measurement before order, You may have to modify both sides to fit your axle, a spacer might required for smaller axle nut.
  • Tips: Use loctite on screws to secure the caps in place.
  • Package Includes: 2x front axle nut caps, 2x set screws, 1x Allen key.
Check Stock

10k-10000 Lb Capacity Electric Drum Brake Trailer Axle 8 Lug-Dexter Compatible (Assembled Brake Axle)

  • Rockwell American Tandem 5,200 lb Electric Brake Trailer Axles - Running Gear Set (10,400 lb Capacity) - Made in the USA.
  • These Axles Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
  • This Axle Kit Includes: (2) 5,200 lb Capacity Electric Brake Axle with Hubs, Bearings, Lugs & Nuts (2 Year Warranty), (2) U-Bolt Kits, (1) Tandem Hanger Kit, (4) Double Eye Springs, (1) 32 oz Johnson Trailer Parts Insulated Mug.
  • Replaces Dexter & Al-Ko Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture, Search "Rockwell American or Johnson Trailer Parts" in Amazon Search Bar for more Trailer Parts.
Check Stock

M-Parts Double Lip Grease Seals - 1.719\ ID 2.565\ OD (10 pack) for 3500LB Trailer Axle (10 Pack)

  • M-PARTS GREASE SEALS - 1.719" ID 2.565" OD (10 pack) for 3500LB Trailer Axle.
  • COMPATABILITY - 1,250 lbs. to 8,000 lbs. trailer axles.
  • INCLUDED - 10 Pack of 1.719" ID 2.565" OD grease seals.
  • TRAILERS – Compatible with Axle Tek, Dexter, Alko, Fayette hubs, and more drums and idler hubs.
  • M-PARTS AUTO- M-Parts Auto specializes in trailer parts & accessories using the highest quality materials.
Check Stock

LIBRA 7000# 7k Tandem Trailer Axle Suspension Kit Leaf Spring/U-Bolt/Hanger Kit

  • 3,500lbs capacity per each spring, for standard 7,000lbs trailer axle , Eye to Eye length: 25-1/4", Free open: 3", width of leaf: 1-3/4", 6 leaves, 9/16" bushing dia.
  • It will replace SW6 / LIB-601-DE / UNA223 / PR6 / 9150021 (different SKU# but same spring).
  • Include 5,200-7,000lbs axle U-bolt kit for 3" dia round trailer axle, Kit include: 4 x 7" long U bolts, U bolts dia. 1/2".
  • 2 x tie plates for 1-3/4" or 2" leaf springs.
  • Include Complete tandem trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x EQ-E1 equalizers, 6 x 3" tall hangers, 8 x shackle straps, 14 x 9/16"-18 x 3" long shackle bolts and locknuts.
  • LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..
Check Stock

Orion Motor Tech Rear Axle Bearing Puller Tool Kit and Slide Hammer Set | Axle Seal and Bearing Remover Set with Slide Hammer Yoke and 3 Rear Axle Puller Adapters, 1\ to 2-7/8\ IDs

  • 8PC. SLIDE HAMMER SET: This 8-piece professional axle, bearing, and seal removal tool set by Orion Motor Tech provides a 5/8" slide hammer, yoke, locknut, hook, and adapters to let you quickly, easily, and safely repair rear axle problems on the vast majority of domestic cars and light trucks.
  • AXLE PULLER SET: Lock the slide hammer onto the 4-point yoke to set up a flange type axle puller that will let you extract parts with threaded holes, including stud axles, spur gears, and more.
  • SEAL PULLER SET: The 5.5 pound slide hammer and its sturdy T handle provide the firm grip and torque needed to pop out worn and damaged seals and other press fit parts using the included hook.
  • BEARING PULLER SET: The small, medium, and large bearing puller adapters cover inner diameters from 1 to 1-7/8.
Check Stock

Tusk Racing Axle Block Orange - Fits: KTM 250 SX-F 2005-2012

  • ... and ensures quality. If there is a quality problem, it can be replaced or refunded at any time. - davidson primary chain case bolts.
  • ️Easy to install: The front axle nut cover is easy to install, and can be matched with the original car after installation. Original standard, perfect replacement for old or damaged parts. · - heritage softail axle nut covers.
  • Quality Assurance: As a professional seller, we offer high quality products and thoughtful services. Each product must be strictly inspected to ensure reliable quality. Please rest assured to buy our products, I hope you have a pleasant shopping experience..
Check Stock

TUSK Racing Axle Block Orange for KTM 250 SX-F Factory Edition 2015-2017

  • Aftermarket parts for Harley Softails 2007-2014 (except Deuce, Springer & Rocker) 2008-2014 Electra Glides, Street Glides & Road Kings 2007-2013 Road Glides 2008-2013 Dynas (except 2008 FXDSE) 2008-2013 Sportsters 2002-2011 V-Rod (except VRSCR & VRSCF).
  • Protect front axle hardware from dirt, moisture, dust and other outer damages.
  • Conceal front axle hardware for a clean custom look.
Check Stock

Julymoda 600mm 24" Rear Axle Track Assembly Kits for Go Kart ATV Quad Rear Wheel Snow Sand Snowmobile DIY Use Metal Black

  • Material: The rear axle is made of high quality alloy and metal material,which is durable.
  • Type:Rear Axle Track Assemly with track parts and Placement on Vehicle Rear,Left and Right..
  • Rear axle length 600mm/60cm/24inch,with two rear wheels Set..
  • Wide Application : This set fits gasoline motor use,like Beach motorcycle,Snowmobile,Mountain motorcycle DIY etc..
Check Stock

3.5k TK Trailer Axle - 3500 lb Idler 5 Lug - TK | 61/46 (4'0) | 5x4.5 |

  • 3,500 lbs Idler Trailer Axle (Capacity 3.5K).
  • Internal Wiring System To ensure seamless design Protect brake wires from wear and tear.
  • Replaces TK Trailer Parts, AL-KO, Hayes, and Lippert Axles.
  • Underslung - Axle is welded with spring seats on the bottom Allows for lower ride height For optimal usage, use with double eye springs.
  • High Strength Straight Steel Axle Tube Construction to ensureA better highway experience.
Check Stock

(4-Pack) Wheelbarrow Axle Bracket Set - 3.27-Inch Wide by 2.17-Inch Long Wheelbarrow Bracket - Complete Set Includes Bolts and Nuts - Compatible with 5/8 Inch Wheelbarrow Axles

  • 3.27-INCH WIDE BY 2.17-INCH LONG WHEELBARROW BRACKET - Exact dimensions are 3.27 inches from end to end of the mounting tabs, while the mounting holes are 2 1/8 inches apart from center to center.
  • COMPATIBLE WITH 5/8 INCH WHEELBARROW AXLES - These black wheelbarrow axle brackets are a universal fit for wheelbarrows with axles that are 5/8 inch in diameter. This is one of the most common axle sizes for wheelbarrows.
  • ONLY COMPATIBLE WITH SINGLE TIRE WHEELBARROWS - Part of the brackets’ design are the indentations on one end of the barrel. These indentations prevent the axle from sliding all the way through the bracket.
  • COMPLETE SET WHEELBARROW AXLE BRACKET - The 4-pack wheelbarrow axle bracket includes a complete set of the required bolts: length 29.62mm/1.17 inches and nuts. As this is a universal fit kit, the mounting holes may not align exactly with the existing holes on the wheelbarrow.
  • AFFORDABLE WHEELBARROW SPARE PARTS - Don’t just throw away your wheelbarrow just because of a simple defect. These 2 pairs of wheelbarrow axle brackets will ensure that you’ll always have a spare axle bracket on hand.
Check Stock

The Trailer Parts Outlet 3500 lb Light Duty Single Trailer Axle Kit with Suspension - Leaf Springs Hanger & U-Bolt kit 89 Hubface - 74 Spring Center 6 4 Frame 5x4.5 Bolt Pattern

  • All-in-One Bundle: This 3.5K LD Single Axle trailer kit includes everything you need for a quick and easy installation, such as a 3.5k Idler Axle, double eye hanger kit, 4-Leaf Double Eye Springs, and 2 1.75k U-Bolt Kits.
  • High Strength Construction - The high strength steel axle tube construction ensures a durable and long-lasting performance for small utility trailers, cargo trailers, ATV trailers, and more.
  • High-Quality Parts - Made with OEM grade trailer axles and suspension, this kit is packed with high-temp axle grease for reliable performance.
  • Low Ride Height - With an underslung design, the axle is welded with spring seats on the bottom, allowing for a lower ride height and improved stability.
  • EZ Lube Design - Removable rubber plug allows for easy access to a grease-able zerk fitting, allowing you to grease your axle without having to remove the entire hub.
Check Stock