Top Axle Shafts

Bang II (Feat. Uppercase 5ive)

  • Fully milled gearbox housing made of 6061-T6 aluminum for the rear axle of ATOPRC.
  • Due to its dimensional stability results in a higher load capacity and service life of bevel gear and ball bearings. The problem of the torn fastening thread has an end with this case.
  • The bearing adapters are included in the set.
  • We recommend gluing the bearings with threadlocker y0113. For mounting the bearing adapters in the housing we recommend Bindulin silicone y19015. To use HD differential shafts y1477, the Atoprc bearing adapters must be machined.
Check Stock

ZKTOOL Lower Control Arm Prying Tool,2 Pack Specialty Tools for Mechanics Lower Control Arm Tool,Suspension Specialty Bushing Tool, Designed to Work With a 7/8 in Diameter Pry Bar.

  • 【8629 Wheel Hub Removal Tool】Universally applicable to all axle bolted hubs (5, 6 and 8 lug hubs). Used to safely remove the frozen hub assembly instantly without damaging the axle..
  • 【6007 Lower Control Arm Prying Tool】For most front-wheel drive vehicles. suitable for the lower control arm.
  • the eyelet end is suitable for any 7/8" crowbar. Used to help the installation of wheel bearings, front axles and CV joints..
  • 【Brake Caliper Hooks】used on variety of automotive repair work that related to brakes, wheel bearings, axle shafts and suspension servicing. Prevent the brake caliper from obstructing operation during maintenance, reducing damage to the brake caliper, brake hose and other parts..
  • 【Superior Material】Made of high quality solid steel with black anodizing, and application of precise mechanical design, sturdy and durable, impact-resistant, corrosion-resistant. Wheel Hub Removal Tool 3/4” steel backing plate and reinforced striking platefor a long-term and reliable performance..
  • 【100% Satisfaction Guarantee】Yoursme committed to providing customers with a good product experience, if you are not satisfied with our products, simply return it for a full refund in 30 days. We support 12 months’ Warranty..
Check Stock

RC-Hub 1Pcs RC Driveshafts Metal Drive Shaft 55-67mm for 1:14 Tamiya Trailer Tractor Truck RC Crawler Car

  • Drive shafts for slash 4x4 1/10 scale Traxxas Slash Platinum/Slash Ultimate/Rustler VXL 4X4/Stampede VXL 4X4/Hoss VXL 4X4/Slash VXL 4x4 parts RC Car.rustler 4x4 drive shaft..
  • Slash 4x4 axles is builtin antiseparation design reduces the failure rate, high performance, and increases the smoothness and angle of remote control car..
  • Compatible with traxxas 4x4 vxl drive shaft is with more turning power and more sturdy use.High reliability, ensuring smooth transmission..
  • Fits for traxxas drive shafts made of high-quality metal materials middle part and wheel hex adaptor is made of 6061-T6 alloy, axle part is made of update material Q235 Carbon steel, ensuring maximum durability and for long time service life..
  • RC cars drive shaft CVD comes with Screws and nuts and easy to use, you can directly use them on your RC car model. If you have any questions during use it, please contact us anytime..
Check Stock

Ebike Universal Torque Arm for Electric Bicycle e-Bike Bike Front or Rear Hub Motors and Mid Drive e-Bike (T-2 for 16mm)

  • This universal torque arm conversion kit fit for electric bicycle e-bike.This product is suitable for normal motor shafts, except for special shafts.
  • The universal torque arm conversion kit is made of consistent quality antioxidant iron and aluminum. The surface is anodized to completely resist oxidation and corrosion, and to maintain a long-lasting, beautiful luster under light conditions..
  • Even though it's a universal design, please check the size & diameters to make sure it fits your bike..
  • Consistent quality steel arm, hub mount, and C-clamp. Comes ready to be installed on either front or rear axle.
  • We are committed to making riding safer,If you have any questions about this universal torque arm kit , please reply to us by email and we will help you resolve any issues as soon as possible..
Check Stock

LUOHAIMEI Oil Bearing 5x2B 5x2.5B 6x2.5B 6x3B (10Pcs) Brass Shaft Sleeve Axle Bushing Bearings for RC 4WD Models Ball-Bearing (Size : 52B 2.05x5x2.4mm)

  • Model Number: 52B 52.5B 62.5B 63B RC Accessories.
  • Torque Capacity: 2.05*5*2.4mm 2.55*5*2.4mm 2.55*6*2.4mm 3.05*6*2.4mm.
  • Brass sleeve, also can be said to be a simple bearing accessories technology model parts brass work piece. Used for fixing axles or shafts. It can reduce the friction between axle and axle frame, improve transmission efficiency, and make your handmade works more precise..
Check Stock

Ebikeling Universal Torque Arm Conversion Kits for Electric Bicycle, EBike Front or Rear Hub Motors and Mid Drive e-Bike Tool for Maintenance, Ebike Accessories

  • Universal : This universal torque arm conversion kit works with e-bikes. Except for specific shafts, this product is appropriate for regular shafts..
  • Must Have : This bicycle torque arm is a must for an electric bike kit that will be installed on dropouts..
  • High Quality: The high-quality aluminum and antioxidant iron that go into the universal torque arm conversion kit are used. The surface is anodized to fully prevent oxidation and corrosion as well as to preserve a pretty shine under light..
  • Dimensions: Arm length 86mm, Axle opening 14mmX10mm, C Clamp 14mmX10mm, Arm thickness 3mm, Hub mount thickness 4mm, C Clamp thickness 3mm, Total weight 2.3oz.
  • Attention : Even though it's a universal design, please check the size & diameters to make sure it fits your ebike. You can always reach out to us if you need any assistance..
Check Stock

Team Associated 20157 SC28 Fox Factory Edition Micro Short Course Truck Ready to Run Kit 1/28 Scale 2WD

  • Off road style front bumper with 2-piece LED.
  • Metal front CVA and rear solid axle shafts with 12mm hex adapters.
  • Black anodized aluminum battery/radio tray with hook-and-loop hold down strap.
  • Black scale 1.9 wheels with soft compound off road tires.
Check Stock

EBIKELING Universal Torque Arm Conversion Kits for Electric Bicycle, EBike Front or Rear Hub Motors and Mid Drive e-Bike Tool for Maintenance, 6 pc Ebike Accessories (White)

  • Universal : This universal torque arm conversion kit works with e-bikes. Except for specific shafts, this product is appropriate for regular shafts..
  • Must Have : This bicycle torque arm is a must for an electric bike kit that will be installed on dropouts..
  • High Quality: The high-quality aluminum and antioxidant iron that go into the universal torque arm conversion kit are used. The surface is anodized to fully prevent oxidation and corrosion as well as to preserve a pretty shine under light..
  • Dimensions: Arm length 86mm, Axle opening 14mmX10mm, C Clamp 14mmX10mm, Arm thickness 3mm, Hub mount thickness 4mm, C Clamp thickness 3mm, Total weight 2.3oz.
  • Attention : Even though it's a universal design, please check the size & diameters to make sure it fits your ebike. You can always reach out to us if you need any assistance..
Check Stock

Folding Electric Bike, Yovital 20\ 350W Electric Bikes for Adults with 36V 10AH Removable Battery, Aluminum E-Bike Electric Bicycle Pedal Assist for Commuter, Professional 7 Speed Gear

  • Universal : This universal torque arm conversion kit works with e-bikes. Except for specific shafts, this product is appropriate for regular shafts..
  • Must Have : This bicycle torque arm is a must for an electric bike kit that will be installed on dropouts..
  • High Quality: The high-quality aluminum and antioxidant iron that go into the universal torque arm conversion kit are used. The surface is anodized to fully prevent oxidation and corrosion as well as to preserve a pretty shine under light..
  • Dimensions: Arm length 86mm, Axle opening 14mmX10mm, C Clamp 14mmX10mm, Arm thickness 3mm, Hub mount thickness 4mm, C Clamp thickness 3mm, Total weight 2.3oz.
  • Attention : Even though it's a universal design, please check the size & diameters to make sure it fits your ebike. You can always reach out to us if you need any assistance..
Check Stock

Team Associated RC8B4e Team Kit ASC80946 Cars Elec Kit 1/8 Off-Road

  • New rear hub features a symmetrical left and right common design with axle height inserts for adjustable roll center tuning.
  • New captured CVA drive shafts design front and rear with center dogbone driveline.
  • New chassis layout featuring two shorty-style only battery configurations..
  • New RC8B4e specific side guards are narrower and feature integrated wire routing clips.
Check Stock

TIKSCIENCE Universal Torque Arm Conversion Kit,Fit for Electric Bicycle E-Bike Front or Rear 2 Set

  • ➤[Fitment] : This universal torque arm conversion kit fit for electric bicycle e-bike.This product is suitable for normal motor shafts, except for special shafts (the size of the motor shaft does not exceed 14mm).
  • ➤[Excellent Function] : These versatile torque arms can be installed inside the frame/fork or outside.This torque arm will help prevent the motor from coming loose from the fork (front) or frame (rear) and also prevent the slotted axle from bending or breaking your dropouts..
  • ➤[Durable Material] : The universal torque arm conversion kit is made of high quality antioxidant iron and aluminum. The surface is anodized to completely resist oxidation and corrosion, and to maintain a long-lasting, beautiful luster under light conditions..
  • ➤[You Will Get] : 2 x Steel torque arm.
  • 2 x Stainless steel nut and 5mm Allen bolt.
  • 2 x Slotted electric motor C washer as pictured..
  • ➤[About Service] : The universal torque arm conversion kit designed and manufactured meets stringent delivery standards, with precision inspections before shipment to ensure quality problems.The customer service period is 2 year. If you have any questions about our product, please reply to us by email and we will help you resolve any issues as soon as possible....
Check Stock

WINMAX TOOLS AUTOMOTIVE 18 Pc Heavy Duty Axles Slide Hammer Dent Panel Bearings Gears Seals Puller Set

  • SHIPPING-IT will be shipped within 24hs, delivery in 7-12 days. Contact us if any problems..
  • This professional quality Slide Hammer Puller kit is ideal for use within the automotive industry for pulling bearings, gears and front wheel drive axle shafts..
  • This heavy duty slide hammer has a 5 lb. hammer to pack real punch. The slide hammer puller set pulls flange-type rear axles and most front-wheel drive hubs and the internal and external jaws provide a variety of combinations to pull bearings, gears and seals. The pack contain versatile puller assortment to let you handle all kinds of pounding and pulling operations..
  • Accessories Included ·Slide hammer, ·2 and 3 jaw puller yokes, ·Internal/external puller arms, ·Wheel/axle puller yoke, ·Dent puller hook, ·Dent puller screws (large and small), ·Adapters and hardware, case.
  • Features/Specifications ·Material: steel, heat treatment ·5 lb. chrome plated steel slide hammer ·T-handle for secure grip ·Chrome-plated shaft for smooth operation ·Combination puller with 5-lb malleable steel slide hammer. ·Drop forged steel pullers and attachments fully hardened shaft and accessories. ·Converts into a 2 or 3 jaws internal/external puller for reaching right areas. ·Packed in a sturdy carry case.
Check Stock