Top Bag On Valve

Hapleby Premium Bike Valve Core Remover Tool for Schrader and Presta, Tire Valve Repair Tool Kit, Including 2PCS Presta and 4PCS Schrader Valve Core

  • 1.PROFESSIONAL VALVE CORE TOOL - Great install and remove tool that takes the guesswork out of tightening or removing the core in Presta tubes with removable cores. It also has fittings for Schader valves and a presta valve extension tool. Easily tighten or remove valve cores on bicycles, cars, and any other air filled tires..
  • 2.LIGHTWEIGHT AND PORTABLE - The valve core remover tool is multifunction portable tool, which weighs only 0.46oz, so it’s a must have in your saddle bag, great accessory for cycling enthusiasts..
  • 3.WARM TIPS - The valve core would back out when you would unscrew your lezyne pump and getting stuck, then you must realize that the valve core has problems and needs to be replaced..
  • 4.GIFT ACCESSORIES - The valve core will not cause problems for a long time, so the 2pcs presta and 4pcs schrader are enough for you to replace the valve core when there is a problem, which can save you unnecessary waste of money..
  • 5.MUST HAVE TOOL - you have been cycling for many years without this tool. you may have just lucked out all this time without needing it, But if you have it, you won’t be stuck on the road..
Check Stock

Jet Creations Clown Punching Bag Inflatable Figure with Weighted Bottom (You Fill Water/Sand), 1 pc, Multi, 42 inch Tall, FUN-BB03

  • [CLOWN WITH NEW LOOK] - Funny Creepy Clown with pop-out hair design blow up punch bag, standing 42 inch Tall..
  • [EXERCISE] - Keep kids active indoor and out, away from computers and gadgets. Great product for kids with endless energy.
  • [IDEAL FOR] - Stay at Home, Home Schooling, After School, Vacations and Breaks, Classroom, Marketing Display, and more.
  • [SETUP] - (1) Fill the bottom valve with 2 liter of water (or 2 kg sand) then make the cap and valve seated firmly (2) Fully inflate the punching bag from the side air valve.
Check Stock

Tire Valve Stem Caps (150 Pack) Black with Sealing Ring, General for Car, Motorcycles, Bicycles and Trolleys

  • Scope of Application: Valve Tire Stem Caps against exposure to dirt and dust, General for car, motorcycles, bicycles and trolleys..
  • High quality material: The valve cap is made of high quality plastic and O-ring rubber, which makes the valve tighter and prevents air leakage..
  • Valve stem caps’ domed shape is so small that it can be mounted by twisting it onto a tire valve lever..
  • Package: 150 PACK valve stem caps per bag for Cover all your vehicles and spare parts..
  • Valve tire stem caps have dust - proof durability, high quality, let you use at ease..
Check Stock

20 Pieces Presta Valve Core Bike Replacement Brass Tubeless Core for Tubeless Road MTB Bike w/Stan s Vittoria Continental Kenda and Mor

  • Package include: 20 pieces presta valve cores you will get in the bag, enough for your bicycle, you can also share them with your family and friends,....
  • Advantage: a small, handy tool, approx. 1 inch/ 2.54 cm long, it is taken to replace the leak of the old valve and make the tire rejuvenation, stop....
  • Durable and sturdy: these valve cores is made of quality copper, enhance the corrosion resistance of the valve core and valve stem, especially when....
  • Fits for: presta valve cores (French valve core) are mainly applied in bicycles, universal Presta valve cores, compatible with Stan's, Vittoria,....
  • Easy to install: use pliers or valve removal tool to screw onto presta valve stem, no longer need to worry about bicycle tires, so that you can ride....
Check Stock

BEERBINGER 2Inch Underwater Scuba Diving BCD Dump Valve/Over Pressure Release Valve for Diver Lift Bag Water Equipment Replacement Over Pressure Valve Scuba Dump Valve Water Equipment

  • Made of ABS plastic body, rubber washer and corrosion-resistant steel spring. High quality, can withstand the immersion of seawater..
  • Over pressure valve (OPRV) for BCD, SMB, lift bag and other buoys. Attached with drawstring lanyard, easy to assemble, easy to use..
  • Specially designed for water sports, scientific design, professional equipment, high-quality materials, comfortable and durable..
  • You can quickly remove the air according to your needs, and eliminate the accidental over-inflation during inflation, making you more focused on diving..
  • Scuba diving standard with overpressure valve/ pressure relief valve for lifting bag and BCD, can prevent rupture, light, strong, durable and portable..
Check Stock

Bell AirStrike CO2 Bicycle Tire Inflator

  • Any Valve Pump Head allows you to easily connect to Presta or Schrader Valves without an adaptor, just press on to any valve.
  • The Bell CO2 inflator is a fast and easy way to inflate any bike tires while on the road or trail.
  • One 16g threaded cartridge included - one cartridge can inflate a completely flat tire.
Check Stock

SILCA EOLO III CO2 Inflator Head Only | Presta & Schrader Compatible | Bicycle Tire Pump CO2 Adaptor | Easy Push to Inflate | Head for Co2 inflator for Bike Tires

  • Versatile | Looking for a bike pump Presta valve adapter? The Silca CO2 bike tire Inflator is the smallest spool valve CO2 regulator on the market and works with any 16g or 25g threaded cartridge. Co2 inflator Presta and Schrader valves compatible..
  • Easy to Use | Thread the cartridge on, press it onto the valve, pump with co2, and air is in your tire. Simple press-to-pump design. No lever needed! Lightest spring action of any spring-valve regulator. Works perfectly with the Presta valve pump or the Schrader valve pump..
  • Airflow Regulation | Light action spring provides easy control over how much co2 is released. Press this EOLO III Silca pump lightly for lesser air in your tire or put more pressure for faster tire inflation..
  • Great Emergency Kit Tool- The small and lightweight quality of the EOLO make it essential for your bike repair kit or bicycle tire repair kit. Perfect to keep in your saddle bag, pocket or your Silca Premio. You can count on this tiny tool to get you home in a pinch!.
  • Camera-lens' Style Valve Head | Allows for easy installation even in disc wheels.This Silca tool features 3 (Red, White, Green) insulation rings to prevent frozen fingers from co2 inflator cartridge..
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ...kes about 30-45 minutes, we suggest to use it as a backup inflation devices.
  • ✅【HIGH QUALITY MINI SCUBA TANK】: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve and breath tube. When normal used, all the parts could work for at least 2 years, and we also provide some free accessories in the accessories bag..
  • ✅【PROFESSIONAL SCUBA TANK WITH DOT CERTIFIED 】:Our mini scuba tank have the CE certified in EU and DOT certified in US, it can be used by uncertified diver, but some diving places may not permit uncertifed people diving, please know your local policy before buy it. This tank can be used for normal diving no more than 10m(about 32 ft), and the water temperature should be above 10 ℃（50℉). Besides, scuba tank can be used as backup air, in this situation, it can be used in 30m(100 ft) underwater..
  • ✅【OUR SERVICES】:Select this package, you will get: 1L tank, regulator, second stage valve, portable bag. If you have any problems with our products, please feel free to contact us. Also, you can fi....
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ...d, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices..
  • HIGH QUALITY MINI SCUBA TANK: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve and breath tube. When normal used, all the parts could work for at least 2 years, and we also provide some free accessories in the accessories bag..
  • PROFESSIONAL SCUBA TANK WITH DOT CERTIFIED :Our mini scuba tank have the CE certified in EU and DOT certified in US, it can be used by uncertified diver, but some diving places may not permit uncertifed people diving, please know your local policy before buy it. This tank can be used for normal diving no more than 10m(about 32 ft), and the water temperature should be above 10 50). Besides, scuba tank can be used as backup air, in this situation, it can be used in 30m(100 ft) underwater..
  • OUR SERVICES:Select this package, you will get: 1L tank, regulator, second stage valve, portable bag, portable case. If you have any problems with our products, please feel free to contact us. Also, you can find most of p....
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ...s about 30-45 minutes, we suggest to use it as a backup inflation devices..
  • ✅【HIGHT QUALITY MINI SCUBA TANK】: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve and breath tube. When normal used, all the parts could work for at least 2 years, and we also provide some free accessories in the accessories bag..
  • ✅【PROFESSIONAL SCUBA TANK WITH DOT CERTIFIED 】:Our mini scuba tank have the CE certified in EU and DOT certified in US, it can be used by uncertified diver, but some diving places may not permit uncertifed people diving, please know your local policy before buy it. This tank can be used for normal diving no more than 10m(about 32 ft), and the water temperature should be above 10 ℃（50℉). Besides, scuba tank can be used as backup air, in this situation, it can be used in 30m(100 ft) underwater..
  • ✅【OUR SERVICES】:Select this package, you will get: 1L tank, regulator, second stage valve, portable bag, portable case, scuba adapter, diving glasses, high pressure hand pump. If you have any probl....
Check Stock

Phantom Aquatics Legendary Mask Fin Snorkel Set with Mesh Bag

  • SET INCLUDES: Rapido by Phantom Aquatics Open Heel Self Adjust Strap Fins, Dual Lens Tempered Glass Silicone Mask, Dry Top Design Snorkel, Mesh Snorkeling Carry Bag..
  • FIN: Great for Beginning & Experienced Snorkelers, Maximum Comfort & Lightweight for Easy Packing & Traveling, Unisex Design, Comfortable Fins with Comfortable Foot Pocket, Quick Release Strap Easy to Adjust, Maximum Propulsion in Short Blade Fin Design..
  • MASK: Two Tempered Glass Lenses, 100% High Quality Silicone Rubber Skirt, Double-Feathered Edge Skirt for a Great Seal on Face, Mask Adapt to Most People's Faces, Low Volume Mask Design, Easy to Clear Mask, Wide Field of Vision, Strong Rapid Action Buckles, Adjust Strap Quick and Easily..
  • SNORKEL: Dry Top Design, Keep Water from Entering Breathing Tube when Submerged, Top Valve Opens at Surface Allowing Normal Water Free Breathing, One-Way Purge Valve, Contoured Tube with Flex Section, Removable Silicone Mouthpiece, Quick Release Snorkel Keeper..
  • BAG: Drawstring Closure with Barrel Lock Fastener, Rinse Fins While still in the bag and Hang to drip dry, Perfect for Fin Transport, Dimensions: (L x W) 26" x 12".
Check Stock

YBOBK HOME Bento Lunch Box, Stackable Insulated Leak Proof Stainless Steel Metal Portable Cylinder All-in-one Lunch Container with Lunch Bag Spoon and Fork for Adults (Coral Red)

  • 【Unique Design】There is a separate lid between the tiers so that the food doesn't touch the bottom of the tier above it, and the lunch box is more insulated.
  • this thermal lunch box with bag usually keeps the hot food warm or cold for up to 2-3 hours.
  • 【Easy to Open】There is a small valve on each lid, when you store food in the lunch containers, the pressure can be release from the valve to help you open or close the lid more easily and avoid damage to the buckles.
  • How to use it: Open the valve before closing the lid, then close the lid and press the lid several times to remove excess air from the container, finally close the valve.
  • and please remove the small valve before opening the lunch box.
  • 【Freedom to Combine】This stacking lunch box has 3 layers, you can freely combine them into single or multiple layers as needed, it is convenient to carry.
  • 【Portable Versatile Design】The personalized lunch box comes with an insulated bag and a set of portable flatware, perfect for everyday use in the office or school, as well as for camping, outings and other outdoor activities.
  • with fascinating vibrant colors, it is also the perfect gift for women, family and friends.
Check Stock