Top Bake Galvanized Fittings

Bear Hollow Supply Set of 8 Bed Slat Brackets Heavy Duty

  • High Quality Material - Bed rail brackets are made of heavy-duty galvanized steel. The surface is galvanized and polished, not easy to rust. The thickened material is more load-bearing, and the porous design is stable and does not fall off..
  • Rich Package - The non-mortise heavy duty rail fittings set contains 12 brackets, 12 plates and enough screws. You can replace the old bed rail brackets at anytime..
  • Bed Rail Brackets Size - 88x64x35mm/3.4"x2.5"x1.4"(LxWxH). Thickness: 2mm..
  • Widely Applicatio - Fit any all sized bed frames, headboards and foot boards, Bunk Beds, Headboards and other wooden furniture..
  • Easy Installation - Direct installation of bed rail brackets takes only a few minutes. Disassembly for replacement is quick and easy..
Check Stock

Chromex Chimney Cleaning Set - 8 Piece - 24 Foot Fiberglass Chimney Rod and 6 Inch Chimney Brush

  • Chromex 8 Piece - 24 Foot Fiberglass Chimney Rod Kit with interlocking threaded ends. Polypropylene 6 Inch chimney cleaning brush with steel center....
  • Heavy duty steel 1/4 Inch threaded fittings - Compatible with our Chromex chimney brush and all standard chimney brushes that use this size connector.
  • 8 - 3 Foot - 55 mm - strong fiberglass rods designed to absorb pressure but also flexible enough not to break..
  • Galvanized steel stem - Heavy duty twisted spiral stem for long-lasting use. 1/4 steel NPT fittings which work with our chimney rods as well as any....
  • ChromeX manufactures thoughtful tools and accessories for both the do-it-yourselfer and the professional. Customer satisfaction is our main priority,....
Check Stock

Chromex Chimney Cleaning Set - 6 Piece - 18 Foot Fiberglass Chimney Rod and 6 Inch Chimney Brush

  • Chromex 6 Piece - 18 Foot Fiberglass Chimney Rod Kit with interlocking threaded ends. Polypropylene 6 Inch chimney cleaning brush with steel center....
  • Heavy duty steel 1/4 Inch threaded fittings - Compatible with our Chromex chimney brush and all standard chimney brushes that use this size connector.
  • 6 - 3 Foot - 55 mm - strong fiberglass rods designed to absorb pressure but also flexible enough not to break. You can combine with other rod sets....
  • Galvanized steel stem - Heavy duty twisted spiral stem for long-lasting use. 1/4 steel NPT fittings which work with our chimney rods as well as any....
  • ChromeX manufactures thoughtful tools and accessories for both the do-it-yourselfer and the professional. Customer satisfaction is our main priority,....
Check Stock

Golden Valley Tools & Tarps 8pc 3/4' 3 Way Flat Corner Canopy Fitting/Batting CAGE Fitting (F3A) - Fits 3/4' EMT Pipe That has an Outer Diameter of 15/16'

  • Heavy Duty Fitting (Galvanized Steel) with Welded Connections and Tightening Eyebolt(s).
  • Our 3/4” fittings have an inner diameter of 1”. Which works with 3/4” EMT pipe that has an outer diameter of 15/16”. This pipe is available at most hardware stores.
Check Stock

Kings Brand Furniture - Adjustable Height Center Support Leg for Bed Frame (1)

  • Packing include:Bed Rail Brackets with Screws Set of 4.
  • Stainless Steel Flat Straight Brace Repair Fixing Bracket with Screws Set of 4.
  • Easy to use:There is no need to do mortise.It's very simple to Installation and removal.And also Easy to Use and Operate..
  • Widely Use:It's suitable for wooden bed frames, bed rails, headboards, footboards, bunk bed ladders,Bed Posts, Bunk Beds, even other wooden furniture.It's ideal of repair of existing wood frames..
  • High Quality:The Bed Rail Fittings are Made of heavy duty galvanized steel, sturdy and durable.
  • The Brackets Mending Plates are Made of Stainless Steel.They Comes with premium screws..
  • Enough For One Bed - No-Mortise Heavy Duty Rail Fittings Set of 4 (4 Brackets & 4 Plates) with enough mounting screws.They are universal in size and can fit any surface..
Check Stock

SURIEEN 90 Degree Grease Coupler Adapter with Sleeves, 3 Jaw Angle Grease Fitting Tool, 90 Degree Grease Gun Coupler Snaps onto Grease Fittings in Tight Spaces for Auto, Farm, Truck - 4 Pieces

  • This grease coupler is designed with 90 degree, can grease hard to reach zerk fittings in tight spaces, convenient for you to connect some difficult fittings, the 3 Jaw coupler design snaps on and off grease fittings easier.
  • Spring loaded sleeve locks coupler in place, helps to secure the connection between your straight coupler and this angle coupler and preventing leakage, make the grease filling more efficient and convenient.
  • These 90 degree crease coupler are made of quality carbon steel material, the surface is galvanized, which can prevent corrosion to the greatest extent and has a longer service life, durable and sturdy, not easy to break, can be applied for long term.
  • 90 degree crease coupler is suitable for auto, farm, truck or industrial using, good for hard-to-reach grease fittings on cars, trucks, farm equipment and more, it can be also applied for most hand-operated grease guns, with working pressure range for 3000-4500PSI.
  • The package comes with 2 pieces silver coupler adapters ,Two sleeves and a pair of oil-proof gloves.Quality Assurance! If you are not satisfied with our products,we accept all of the return,replacement or refund requests..
Check Stock

ZELCAN 64 Pc Hydraulic Hose Tube and Pipe Fitting Kit, 37 Degree JIC Cap and Plug Assortment Kit, Heavy Duty Seal Adapter Set w Precision Threading, Steel Flare Fitting Set, Dash Sizes 4 6 8 10 12 16

  • 64 Fittings: This 64-pc. JIC hydraulic cap and plug kit gives you plenty of fittings in the 6 most commonly needed dash sizes: -04, -06, -08, -10, -12, and -16.
  • Superior Quality: Our hydraulic fittings are made from 45# structural steel to withstand high heat and pressure and galvanized to resist corrosion in even punishing environments.
  • Easy to Use: These JIC caps and plugs have precision-engineered standard threading to install smoothly, seal your hoses, tubes, and pipes hermetically, and come off cleanly.
  • Easy to Organize: This tool set's blow-molded case has a chart for easy identification of the various sizes and foam lining to protect your pieces from wear in transit.
Check Stock

Silver 90 Degree Grease Coupler Adapter Grease Gun Coupler 90 Degree Grease Gun Fittings 3 Jaw Angle Adapter Coupler Swivel Snap Right Fitting Tool for Farm Truck Auto Industrial Use()

  • ...d locks coupler in place, helps to secure the connection between your straight coupler and this angle coupler and preventing leakage, make the grease filling more efficient and convenient.
  • Reliable material: made of quality carbon steel material, these 90 degree crease couplers are sturdy and durable, the surface is galvanized, which can prevent corrosion to the largest extent and has a longer service life, durable and sturdy, not easy to break, can be applied for long term.
  • Easy to operate: designed with 90 degree, this grease coupler can grease hard to reach zerk fittings in tight spaces, convenient for you to connect some difficult fittings, the 3 jaw coupler design snaps on and off grease fittings easier.
  • Multiple function: the 90 degree crease coupler can be applied for auto, farm, truck or industrial using, good for hard-to-reach grease fittings on cars, trucks, farm equipment and more, it can be also suitable for most hand-operated grease tools, with working pressure range for 3000-4500PSI.
Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock

uxcell M15 0.035T Capacity Single Swivel Rope Pulley Roller Block 2 Pcs

  • Available with bronze self-lubricating bushings.
Check Stock

WMYCONGCONG 80 PCS Hydraulic Zerk Grease Fitting Assortment Kit SAE Standard including Straight, 90 Degree, 45 Degree Angled Grease Fitting for Replacing Missing or Broken Zerk Fitting

  • High Quality: The grease zerks fitting are made of zinc-plated iron, galvanized iron with high strength is more durable and rust-resistance..
  • Time-Saving: The grease zerk nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, will not slippery when rotating, easy and convenient to handle..
  • Wide Application: These straight and angled grease fittings are great to replace your old or broken fittings in the hydraulic grease line, suitable for most automotive, motorcycle, truck, farm, and industrial applications..
  • Good Storage Organization: Different size of grease fitting is packaged into different grids with size label for easy identification. Durable plastic case, convenient to storage. Handy assortment in organized case, easy to carry..
  • 80 pieces SAE Grease Fittings Assortment Kit: Sizes include: Straight 1/8"-27(10pcs).
  • all common-used sizes, good value, come in handy..
Check Stock

8 Pack E-Track Ratchet Straps 2\ x15' 4400 lbs Tie Down

  • 4400 lb breaking strength and 1460 lb working load limit.
  • Standard E-track fittings for use in trailers, cargo vans, and more.
  • 100% polyester webbing and galvanized steel ratchets.
  • Automatic locking and quick thumb release.
Check Stock