Top Balanced Dac Xlrs

Sennheiser Consumer Audio HDV 820 Reference Headphone Amplifier DAC - ESS 9028PRO Sabre with USB

  • The HDV 820 delivers reference digital-to-analog conversion (DAC) and world-class headphone amplification in one audiophile-grade device.
  • Convert to analog from USB, S/PDIF coaxial and Optical sources with the ESS 9028PRO SABRE DAC.
  • Over 115 dB of pristine gain for vivid, dynamic sound reproduction with < 0.001 percent THD Screen reader support enabled..
  • Inputs: Balanced XLR and unbalanced RCA inputs.
  • Outputs: XLR3, XLR4, 6.3mm (1/4-inch), dual 4.4mm Pentaconn (balanced) and stereo XLR analog pass-thru.
Check Stock

Topping DX3 Pro+ ES9038Q2M Bluetooth 5.0 LDAC Audio Decoder DSD512 DAC AMP NFCA Headphone Amplifier Pre Amplifier (Black)

  • ...tortion. It pairs with high sensitivity IEMs and power hungry high impedance headphones nicely..
  • Pre-amplifier function ：Adapt to different usage scenarios, DX3 Pro+ has 4 output modes: Headphone Amp, Headphone Amp+ Line out, DAC, and Pre amplifier..
  • PA3s is the best power amplifier for DX3 Pro+： PA3s has RCA+TRS balanced inputs. When used with DX3 Pro+, the TRS balanced input can be used to input other audio sources. The output power of 80W x [email protected]Ω, 10%THD+N, 65W X [email protected]Ω, 1%THD+N can be adapted to most situations where speakers are used..
  • Bluetooth headphone amp / Bluetooth DAC application： Connect the Bluetooth of the phone, tablet or notebook to DX3 Pro+, and connect the power amplifier, active speakers or headphones to the DX3 Pro+'s output, then DX3 Pro+ becomes your Bluetooth Headphone amp / Bluetooth DAC. If your device supports LDAC transmission, you will get even better experience..
Check Stock

FiiO AM3 Balanced Output Headphone Amplifier Module for X7 Portable High-Resolution Audio Player, Titanium

  • ...ared to the original, output power is increased by 225% up to 3000mW per channel with a lower output impedance – allowing it more effortlessly power all kinds of headphones..
  • [Desktop-level connectivity]: The M17 mp3 player features : 3.5mm output: headphone out/line out.
  • 4.4mm output: balanced headphone out/balanced line out.
  • RCA coaxial port: coaxial input and output.
  • USB 3.0 port: supports USB Host and Device modes, can be used for high-speed data transfers and fast charging.
  • USB 2.0 port: supports USB Host mode, allowing external DACs or hard drive storage to be connected..
  • [Desktop-tier heat dissipation]: With exceptional audio quality comes with large power consumption, so effective heat dissipation was a large focus when designing the M17 music player. Not only are "H" type heat dissipation and VC liquid cooling technologies adopted, the bluetooth mp3 player M17's 151g unibody aluminum alloy frame also effectively transfers heat out of the device. Finally, the cooling fan stand also further makes sure heat is rapidly transported away..
  • [Desktop-quality power supply]: The M17 desktop mp3 player contains two power supplies – a battery power supply and a power supply powered by e....
Check Stock

IKKO ITM05 DAC Portable Balanced Headphone amplifiers Two CS43198 Flagship DAC Chips 32-bit 384kHz DSD256 (Lightning, Black)

  • The Ikko ITM05 is an ultra-portable balanced DAC and headphone amplifier combo, integrating high-quality components in an extremely compact and lightweight package. It will thus advantageously accompany your smartphone to offer you the best sound reproduction, wherever you are. Practical, it fits easily in a pocket or bag..
  • Ikko designed its ITM05 to be a compact format that fits in a pocket, but made no concessions to the selected components and architecture to ensure a high level of performance. Thus, the symmetric DIGITAL/analog conversion level comes with a pair of Cirrus Logic CS43198 DAC chips, each of which manages one channel, ensuring high sound accuracy while greatly limiting power consumption..
  • ITM05 has a strong parameter base with 0.0008% THD and 122dB SNR. It is also capable of reading high resolution files up to PCM 32bit 384kHz and DSD256..
  • The ITM05 offers full compatibility with your favorite playback devices. The input is on a USB-C or Lightning port and the output is on an unbalanced 3.5mm jack or 2.5mm balanced jack connector. It can also accompany an Android or iOS smartphone, a computer running Windows or Mac OS and will connect just as well to a balanced headset as to classic headphones..
  • The design of ITM05 is an important a....
Check Stock

HiBy R3 Pro Saber, Hi-Res Music Player, Hi-Fi Lossless Audio Player, mp3 Player with Bluetooth and WiFi/Tidal&Qobuz Streaming/Dual ES9218P Chips/2.5mm Balanced Output/Full Touch Screen (Gray)

  • ...ures, The operation is smoother and the interface is more user-friendly. Using the HiByLink function, wireless remote control can be realized, and the mobile phone can control device playback, volume adjustment, and playlist management..
  • 【HiFi Audio MP3 player with 2.5mm balanced output】Compared with the second-generation R2, R3 Pro Saber has balanced output ports .With four independent amplification channels, balanced output brings more powerful amplification, wider soundstage and exquisite detail..
  • 【bluetooth mp3 player】For extreme wireless Hi-Fi experience, supports Bluetooth codecs including UAT/LDAC/aptX/AAC/SBC in Bluetooth 5.0 standard. Two-way Bluetooth, can be used as a Bluetooth receiver and transmitter. Wireless transmission function can also be realized through 2.4G&5G WiFi..
Check Stock

Monolith Desktop Headphone Amplifier and DAC with THX AAA Technology Dual AKM 4493 DACs & Dual AAA-788 Modules

  • The worlds most linear amp technology: the THX achromatic audio amplifire (THX AAA) ensures the ultimate no-compromise Headphone audio experience.
  • True balanced operation: Each THX stereo amp module operates in a bridged configuration to maximize output power for each channel, each DAC operates....
  • Dual AKM 4493 DACs: new flagship 32-bit stereo premium DAC. It supports PCM inputs up to 768kHz and a direct stream digital input of 2. 8/5. 6/11. 2....
  • Balanced & single ended Headphone output: Compatible with all headphones and items.
  • Tailor your sound: Use the powerful digital tools to tailor the sound to your personal preference. Does your headphone have a little sibilance? Set a....
Check Stock

RME ADI-2 DAC FS PCM/DSD 768 kHz Signal Converter with AKG K240 Studio Pro Headphones & XLR Cable Bundle

  • The ADI-2 DAC includes an improved SteadyClock, a fine-tuned to perfection analog circuitry, new MRC remote control, Extreme Power headphone output and a very special IEM output.
  • It has all the bells and whistles that made the ADI-2 Pro famous, including its perfectly transparent sound signature and full DSP processing with Bass, Treble, Loudness, 5 Band Parametric EQ, Crossfeed and much more.
  • The ADI-2 DAC is the home and hi-fi optimized version of the ADI-2 Pro, a studio AD/DA converter of the highest quality.
  • As the most versatile DAC available, the ADI-2 DAC offers balanced/unbalanced analog I/Os, an Extreme Power headphone output, a super low noise IEM output, SteadyClock FS, 4-stage hardware output level control, DSP-based signal processing, external power supply operation, Class Compliant USB compatibility, sample rates up to 768 kHz as well as DSD and Direct DSD playback.
  • The updated ADI-2 DAC uses AKM's AK4493 in a special circuit variant developed by RME engineers that allows the chip to perform at its best. With noise levels of 123 dBA, distortion less than -120 dB, or THD+N of -116 dB, the device delivers outstanding measured values.
Check Stock

iBasso DC04Pro Portable USB Headphone Amp and DAC Dongle, 3.5mm Single-Ended and 4.4mm Balanced Headphone Output, High-Resolution Audio Player, Blue

  • HIGH-RESOLUTION AUDIO MUSIC PLAYER: The iBasso DC04Pro dongle DAC offers a high-performance audio processing solution for both iOS and Android devices. This DAC amp provides a 3.5mm SE (single-ended) output, a 4.4mm balanced output, and low power consumption..
  • PORTABLE DESIGN: This DAC's small size makes it easy to carry and use wherever you go, so you can always keep high-quality audio at your fingertips. Pair it with your favorite portable device and enjoy music without compromising on sound..
  • COMPATIBLE WITH MULTIPLE DEVICES: This audio amp is compatible with a variety of devices, such as the Apple iPad, iPhone, and iPod. It also works with Android phones and tablets as well as your computer or laptop..
  • EASY TO USE: With its plug-and-play design, the iBasso DC04Pro headphone amp DAC is easy to use and set up. Simply connect the USB DAC amp to your device using the included cables and enjoy a full sense of immersion with amazing, enhanced sound..
  • AFFORDABLE DAC/HEADPHONE AMP: The iBasso DC04Pro portable amplifier offers an affordable option without sacrificing performance. G....
Check Stock

Monolith Liquid Gold Balanced Headphone Amplifier & DAC by Alex Cavalli, Solid State Amp, AKM AK4493EQ DAC, Balanced & Single-Ended Headphone Outputs

  • Solid State Amplifier : Balanced design. Ultra high power. The Liquid Gold X is a fully differential, balanced, current feedback, solid state amplifier with an approximate full output power of 3.6 watts per channel into a 50-ohm load. The amplifier is microprocessor controlled using precision A-to-D and D-to-A conversions to manage and monitor the runtime behavior of all critical aspects of the circuitry..
  • AKM AK4493EQ DAC: Detailed sound. Exceptional musicality. The AKM AK4493 is AKM's new flagship 32-bit stereo premium DAC. It supports PCM inputs up to 768kHz and a Direct Stream Digital (DSD) input of 2.8/5.6/11.2 (maximum) MHz, the industry's highest level. An internal circuit employs a newly developed 32-bit digital filter for the ultimate in sound quality and musicality..
  • Balanced and Single-Ended Headphone Outputs: With multiple inputs and outputs for balanced and single-ended operation and easy front panel input selection, the Liquid Gold X is compatible with just about everything..
  • Versatile Inputs: Digital or Analog — We've Got You Covered: The Liquid Gold X amplifier features both single-ended and balanced analog inputs, as well as USB, Coaxial, and Optical digital inputs to support all your connectivity needs..
Check Stock

The Audiophile's Project Sourcebook: 120 High-Performance Audio Electronics Projects (Tab Electronics)

  • LIGHTNING CONNECTOR- As the first triple driver Lightning headphone ever, this MFi certified version of our industry leading multi-award winning Triple Driver In-Ear is perfect for Apple iOS users who demand premium sound quality..
  • 5-IN-1 CONTROLLER- Exclusive five-directional button allows you to make crystal clear calls, activate voice control, adjust volume, and change tracks effortlessly..
  • THREE DRIVERS + HD DAC- Two balanced armatures (like mini tweeters) + one titanium dynamic driver (like a mini speaker) and a high definition DAC deliver superior definition with lossless clarity..
  • PERFECTED ERGONOMICS- Earpieces use oblique angles that naturally match your ear canals for a comfortable secure fit. Additionally, 9 included ear tips sizes ensure a proper seal for ultimate sound clarity and isolation..
  • EXPERTLY TUNED- Tuned by Grammy winning sound engineer Luca Bignardi for a fully balanced and detailed soundstage..
Check Stock

FiiO M17 MP3/MP4 Player Music Player High Resolution Bluetooth Portable Desktop Audio Player 6.3mm/4.4mm Android 10 Lossless Apple Music for Home/Car Audio/Speaker/Preamplifier 9200mAh Battery

  • ...ared to the original, output power is increased by 225% up to 3000mW per channel with a lower output impedance – allowing it more effortlessly power all kinds of headphones..
  • [Desktop-level connectivity]: The M17 mp3 player features : 3.5mm output: headphone out/line out.
  • 4.4mm output: balanced headphone out/balanced line out.
  • RCA coaxial port: coaxial input and output.
  • USB 3.0 port: supports USB Host and Device modes, can be used for high-speed data transfers and fast charging.
  • USB 2.0 port: supports USB Host mode, allowing external DACs or hard drive storage to be connected..
  • [Desktop-tier heat dissipation]: With exceptional audio quality comes with large power consumption, so effective heat dissipation was a large focus when designing the M17 music player. Not only are "H" type heat dissipation and VC liquid cooling technologies adopted, the bluetooth mp3 player M17's 151g unibody aluminum alloy frame also effectively transfers heat out of the device. Finally, the cooling fan stand also further makes sure heat is rapidly transported away..
  • [Desktop-quality power supply]: The M17 digital music player contains two power supplies – a battery power supply and a power supply powered by....
Check Stock

Topping PA5 Fully Balanced Power Amplifer 140w×2 TRS×2 Input Speaker Terminal Output Class D Power Amp HiFi Amplifiers (Black)

  • 【Fully Balanced Amplifier】The newly developed Class D amplification circuit uses multiple novel optimization techniques to fully push the performance and output power to the maximum. The new circuit provides crisp, clean and deep sound with completely inaudible noise floor. The fully balanced structure makes PA5 no more hum, no more noise, no more ground loop..
  • 【Distortion Is as Outstanding as DAC】.
  • 【High Output Power】PA5 could output 140W×2 at 4ohm load, 10% THD+N. In higher standard of THD+N of 1%, outout power will be 125W×2 at 4ohm load. The high output power and low distortion on load are sufficient for most speakers and applications..
  • 【Low distortion & Noise】Zero pop noise or thumping during turn-on or turn-off. Over-voltage, under-voltage, short-circuit, over-current, over-heat protection are complete..
  • 【PA5+E50+L50】This is a fully functional combination. When you need a more comprehensive system, we recommend a combination of PA5 power amplifier, E50 DAC, and L50 headphone amplifier. In this way, there are corresponding equipment from the digital audio s....
Check Stock