Top Balanced Unbalanced

ART 351 EQ 31-Band 1/3 Octave Graphic Equalizer

  • The 351 is a single-channel, 31-band, 1/3-octave graphic equalizer with many features: constant Q circuitry with a 3% center frequency accuracy, 20mm center detent sliders, selectable boost/cut range of 6dB or 12dB, active balanced and unbalanced input and output connections, adjustable high-pass filter, adjustable low-pass filter, variable input level control, clip level indicators, ground lift switch, internal power supply, and selectable line voltage switch.
  • The ART 351 Single Channel 31-Band Equalizer features a rugged all-steel chassis that occupies a single 19" rackspace.
Check Stock

Beyerdynamic DT-880-PRO-250 Semi Open Studio Reference Monitor Headphones Bundle with Samson QH4 4-Channel Studio/Podcast Monitoring Headphone Amplifier

  • ...4-channel stereo headphone distribution amplifier. Four independent 1/4" stereo headphone channels. Individual volume control on each headphone channel. Two balanced 1/4" input connectors. Stereo 1/8" Aux input and output. Master Mute and Mono-summing switches. Specifications: Inputs: 2 x 1/4" balanced, stereo 1/8" unbalanced TRS. Outputs: 4 x stereo 1/4" unbalanced, stereo 1/8" unbalanced TRS.
  • Controls: Master volume, master Mute, master Mono, 4 x Channel volume. Noise Floor: -114dBu, 22k BW unweighted. Maximum Output: 8.3 dBu, 1% THD+N, loaded 16R. Dynamic Range: 22dB, 22k BW. Frequency Response: 17Hz47kHz (-3dB). Power: 15VDC adapter..
Check Stock

Yamaha HS5 Powered Bi-Amplified Studio Monitor (PAIR)

  • 2-way bass-reflex bi-amplified nearfield studio monitor with 5" cone woofer and 1" dome tweeter.
  • 45W LF plus 25W HF bi-amp system for high-performance 70W power amplification.
  • ROOM CONTROL and HIGH TRIM response controls, XLR and TRS phone jack inputs accept balanced or unbalanced signalsDescriptionThe HS5 Powered Studio Monitor from Yamaha is a bi-amplified monitor that is designed for accurate sound reproduction. It is capable of up to 70W of total output and features a 5-inch woofer and a 1-inch tweeter with waveguide that can produce frequencies up to 30kHz. The HS5 has both an XLR and 1/4 TRS input that accept either balanced or unbalanced signals for integration into a variety of studio setups. Low Resonance Enclosure Design HS Series cabinets are designed to eliminate unwanted resonance and increase the accuracy of sound reproduction to their extreme limit. The enclosures are constructed from a dense MDF with a damped acoustic response. HS Series engineers also employed a traditional three-way mitered-joint technique. Common to architectural design, this construction firmly anchors the corners of the enclosure to improve durability and eliminate unwanted resonance that can influence overall sound N....
Check Stock

tisino 3.5mm to XLR Balanced Cable Adapter, Gold-Plated 1/8 inch Mini Jack Aux to XLR Male Mono Audio Cord for Cell Phone, Laptop, Speaker, Mixer - 1ft

  • BALANCED XLR male to 3.5mm stereo TRS cable is commonly used on a cell phone, MP3 player, tablet, laptop, or any 3.5mm audio output to a mixing console or powered speakers..
  • This is a balanced cable, the tip and ring have continuity with pins 2 and 3 respectively. This is NOT an unbalanced Mono cable, nor is it a stereo cable. this cable carries an unbalanced stereo signal into balanced mono input. NOTE: It would work fine for a mono balanced 1/8 line to xlr, if it works at a stereo source to the mono mic input, there requires some sort of summer/transformer or a balance receiver and transmitter..
  • 20 AWG 4N Oxygen Free Copper with shielding ensure high fidelity sound quality and provide maximum conductivity and signal clarity.great choice for music lover.
  • With Heavy Duty 24K Gold-plated XLR and 3.5 mm connectors, it could eliminate signal loss and static noise,provide durability and improve the signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality.
  • Heavy Duty Flexible Rubber and Nylon Braid Jacket Protect Your Cable, the outer diameter of the cable is 6.0mm(0.24 inch),Top quality and made by environment-friendly material, Polyethylene insulation improves high frequency response,strong, flexible and dur....
Check Stock

Yamaha MSP3 Studio Monitor Speaker

  • Balanced XLR, balanced phone jack and unbalanced RCA jack inputs for versatile connectivity..
  • High and Low tone controls for sound tailoring.
Check Stock

HOMER The Iliad & the Odyssey Deluxe Hardbound Edition

  • Two channels of balanced line level analog output.
  • Adjustable signal level: +18dBu / +4dBu / 0dBu/ 0dBV /-10dBV (through Dante Controller).
  • Frequency Response: 20Hz to 20kHz (-/+0.5dB).
  • Impedance: 150 Ohm balanced, 75 Ohm unbalanced.
  • Powered through Class 1 802.3af PoE Switch or injector.
Check Stock

Audinate Dante AVIO – Analogue Output Adapter 2-Channel

  • Two channels of balanced line level analog output.
  • Adjustable signal level: +18dBu / +4dBu / 0dBu/ 0dBV /-10dBV (through Dante Controller).
  • Frequency Response: 20Hz to 20kHz (-/+0.5dB).
  • Impedance: 150 Ohm balanced, 75 Ohm unbalanced.
  • Powered through Class 1 802.3af PoE Switch or injector.
Check Stock

OSD Audio 1000W 2CH Commercial Amplifier 100/70V, Class D LED Indicator Lights, RS232

  • COMMERCIAL-GRADE AMP: A compact and powerful amp for commercial 70V/100V distributed audio systems.
  • 500W X 2 OF POWER: Delivers up to 500 watts per channel for maximized sound and minimal distortion.
  • 70/100V SWITCHABLE: Includes (Canada and US) and 100V switch (Europe and overseas).
  • HIGHLY EFFICIENT: Class D amp typology produces the power but runs cool.
  • FLEXIBLE INPUT/OUTPUTS: Equipped with balanced and unbalanced inputs, audio loop unbalanced outputs and 12V trigger in/out and RS232 connectivity.
Check Stock

Compact Mini Hum Eliminator Box - 2 Channel Passive Ground Loop Isolator Noise Filter AC Buzz Destroyer Hum Killer w/ 2 1/4-Inch TRS Input and Output for 2 Mono / 1 Stereo Signal - Pyle PHE300

  • REMOVES AC NOISE: The Pyle Hum Eliminator removes 60Hz AC hum caused by ground loops that act like radio antennae (loop antenna). Breaks the ground....
  • PASSIVE DEVICE: The noise isolator is a passive device which does not require power to operate. Equipped w/ ¼” TRS phone inputs and outputs on 2....
  • COMPACT DESIGN: This noise filter device features a high performance ultra compact and portable design allowing you to easily bring it anywhere. It....
  • UNBALANCED TO BALANCED SIGNAL: Automatically converts unbalanced to balanced signal without any signal loss and is responsible for breaking the ground....
  • This unit is designed to reduce or eliminate hum noise caused by AC 160 HZ Electric hum, or faulty ground loop. It will not solve noise caused by....
Check Stock

Audio Technica ATH-M70x Pro Monitor Headphones ATHM70x+Amplifier+Free Headphones

  • ... 4-channel stereo headphone distribution amplifier. Four independent 1/4" stereo headphone channels.
  • Individual volume control on each headphone channel. Two balanced 1/4" input connectors. Stereo 1/8" Aux input and output. Master Mute and Mono-summing switches. Specifications: Inputs: 2 x 1/4" balanced, stereo 1/8" unbalanced TRS. Outputs: 4 x stereo 1/4" unbalanced, stereo 1/8" unbalanced TRS. Controls: Master volume, master Mute, master Mono, 4 x Channel volume. Noise Floor: -114dBu, 22k BW unweighted. Maximum Output: 8.3 dBu, 1% THD+N, loaded 16R. Dynamic Range: 22dB, 22k BW.
Check Stock

6 Beyerdynamic DT-880-PRO-250 Studio Recording Headphones+Presonus Headphone Amp

  • ... connectors. Stereo external input point on each channel for more me with trim control. Mix control between inputs A and B. Talkback with external XLR microphone with control. Direct stereo line output on each channel. Input A: (2) TRS balanced 10k Ohms.
  • Input B: (2) TRS balanced 10k Ohms. External Input: TRS stereo unbalanced 10k Ohms. Headphone Amplifier Output Power: 150 mW RMS (60 Ohms) per channel. Audio Outputs: TRS stereo unbalanced per channel. Master Controls: Talk button, Talkback volume, Input A, Input B. Channel Controls: Headphone level, Mix A/B control, External input level, Mono, Mute. External Talkback: XLR with TS external control jack. Power: IEC - factory configured for 115V or 230V. Rack Space: 1U.
Check Stock

Philips Fidelio X3 Wired Over-Ear Open-Back Headphones, Multi-Layer 50mm diaphragms, Hi-Res Certified, Premium Finishing - Hear The Difference

  • All new Philips Fidelio X3 with wide, natural soundstage and uncolored sound.
  • Exquisitely tuned 50 mm multi-layer polymer (with dampening gel) diaphragms - delivers exquisitely detailed highs, full and smooth midrange, and impactful (without overpowering) bass.
  • Hi-Res Audio certified. Hear the full impact of every note when wired to a high-resolution source for a lifelike performance..
  • Open-back design. Wide, natural soundstage with acoustically transparent Kvadrat speaker fabric. By eliminating the air pressure build-up behind the diaphragms, an immersive and spacious sound is born..
  • Premium finishing also means responsibly sourced materials. The sumptuous black Muirhead Scottish leather covering the headband is sustainably and ethically sourced..
  • Balanced and unbalanced inputs means it is ready for your favorite headphone amp or your everyday phone and mobile devices..
  • Detachable Balanced and Unbalanced 3 m oxygen-free cables included.
  • 3.5 – 6.3 mm adapter + cable clip are also included.
  • Technical specifications: 5 - 40,000 Hz frequency response | Open acoustic system | 500mW maximum power input | 30 Ohm impedance | 100 db @ 1 mW sensitivity | 13.4 Oz weight.
Check Stock