Top Ball Lever Valve

Shower head Shut Off Valve ,Water Flow Control Valve,Stainless Steel Valve NPT Thread(1/2\ Female X 1/2\ Male)

  • All parts of shower flower control valve are made of high-quality stainless steel, (stainless steel body, stainless steel handle, stainless steel ball) stronger and more corrosion resistant than brass and plastic..
  • The stainless steel water flow control valve is designed with a single lever. It can be turned on and off by only turning 90 degrees. Even if the hand is full of foam, the water flow can be easily adjusted and closed..
  • The 1/2" standard NPT thread can match most shower pipes and shower heads in the United States..
  • This stainless steel ball valve can be installed on hand showers, shower hoses, and pipes. Widely used in at home, bathroom, kitchen, RV, etc..
  • Good after-sales service: If you have any questions, please contact us for a refund or replacement..
Check Stock

Kegco HBK199S-2 Keg Dispenser

  • ... Gauge Regulator packed with premium features! The top gauge indicates output pressure, while the side gauge tells you what's left in the CO2 tank, so you don't run out of gas during a party. The chrome plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this NSF-approved Kegco CFBL beer faucet puts a stylish finishing touch on your kegerator at a price you'll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is ....
Check Stock

Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit with 5 lb. Co2 Tank

  • ... that let you dispense up to two kegs at the same pressure. It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi..
  • LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L D System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • TWO CHROME BEER FAUCETS WITH BRASS LEVERS: Featuring a forged brass body and highly polished chrome finish, these NSF-approved Kegco CFBL beer faucets put a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
  • STANDARD METAL BEER FAUCET WRENCH: This beer fauc....
Check Stock

BACOENG Double Faucet Door Mount Kegerator Refrigerator Conversion Kit No Tank

  • ...bber covers for protective purposes. You can use the gauge to know the pressure outside and inside the CO2 tank –you will not have to be worried that your gas might run out. It also has a shutoff valve that features a built-in spring for preventing the backflow of beer. Pressure Relief Valve Releases at 45PSI..
  • 2. LEVER HANDLE KEG COUPLER: This refers to a D System Keg Coupler that has a strong construction made of nickel-plated forged brass. The probe, on the other hand, is made of stainless steel. The unit can be used alongside any domestic brand American D system Sankey kegs. It features an easy-to-use design, where you only need to pull the lever handle out and down, in that order, to couple the keg. The coupling of the keg is quite convenient with the availability of a 55-psi pressure relief valve.
  • 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-pla....
Check Stock

Longacre® 52-52009 Deluxe 2-1/2 GID Quick Fill Gauge 0-60 psi

  • Make your tire pressure readings easy to see day or night with this 2-1/2" glow in the dark face Longacre air pressure gauge.
  • Connect your air line, press the lever, and fill your tires twice as fast as other air pressure gauges.
  • and there is no need to remove the fill chuck.
  • The tire gauge contains a built-in tire pressure deflator valve to drop your pressure to your desired level and reduce pressure in overinflated tires.
  • The internal check valve allows use as a stand alone tire gauge without the air hose.
  • Features a high flex 17" hose and includes both an angle and ball chuck for added convenience and easy access to the tire valve from any angle.
Check Stock

Longacre® 52-52007 Magnum 3-1/2 GID Quick Fill Gauge 0-60 psi

  • The large, 3-1/2" glow in the dark face makes this tire pressure gauge easy to read and use any time of the day or night.
  • Connect your air line, press the lever, and fill your tires twice as fast as other air pressure gauges.
  • and there is no need to remove the fill chuck.
  • The tire gauge contains a built-in tire pressure deflator valve to drop your pressure to your desired level and reduce pressure in overinflated tires.
  • The internal check valve allows use as a stand alone tire gauge without the air hose.
  • Features a high flex 17" hose and includes both an angle and ball chuck for added convenience and easy access to the tire valve from any angle.
Check Stock

Kegco EBSHCK-5T Kegerator Kit, 1 Faucet with Tank, Standard

  • ...ock Cornelius Pepsi kegs. The gas in comes with a 1/4" nut and 5/16" hose barb already attached, allowing you to quickly connect it to the same size air line that standard draft beer regulators use. The beer out connector has a 3/16" hose barb that connects to standard 3/16" beer line..
  • CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this NSF-approved beer faucet puts a stylish finishing touch on your kegerator at a price you'll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4" length..
  • INCLUDES EMPTY 5 LB. ALUMINUM CO2 TANK: All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. These eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear..
Check Stock

2 Pieces Air Compressor Valve ,Ball Type Drain Valve Brass Mini Ball Valve, 1/4 Inch NPT Male x NPT Female for Air Compressor

  • Quality brass to make: air tank drain valve uses quality brass to make, so it is stable and not easy to break, safe and reliable, with corrosion resistance, wear resistance, allowing you to use it with confidence for a long period.
  • Better work performance: brass mini ball valve is equipped with lever handle for convenient on/off manual control and full port flow, giving you higher operating efficiency and better work performance.
  • Also it has quarter-turn, and the double-seal system allows flow to go in either direction, easy to operate and practical to use.
Check Stock

HASBEEN Bike Pump Portable Mini Hand Air Tire Pump for Road Mountain Bicycle Wheel and Inflatables Ball Fits Presta & Schrader Valve 160psi 12inch

  • 【LIGHTWEIGHT AND PORTABLE DESIGN】- The HASBEEN Bike Tire Pump comes with an on-bike mount including frame mounting bracket and hardware. With a....
  • 【NO AIR LEAKS & ALUMINUM ALLOY CONSTRUCTION】- The secure locking lever on the head of Bicycle Tire Pump made out of aluminum, which is durable and....
  • 【TWIN-VALVE HEAD & FASTER PUMPING】- Clever twin-valve head fits either Presta or Schrader valves via a quick swap. High pressure 160psi / 11bar....
  • 【ADDITIONAL NEEDLES & GLUELESS PUNCTURE REPAIR KIT 】- Bike Tire Pump includes sports balls and inflatables needles for soccer ball, yoga ball,....
  • 【HASBEEN FRIENDLY SERVICE】 - HASBEEN friendly service the quality, performance and fit of the Portable Mini Bicycles Pump. If you are not....
Check Stock

CGOLDENWALL Eye Wash Station Wall Mounted Eyewash Station Eye Face Washing Station for First Aid 304 Stainless Steel+ABS coating+Eye Wash Sign, NPT thread

  • 15 gallon stainless steel pressurized tank. Tank has built-in carrying handles, Schrader air intake valve, pressure gauge and pressure relief valve. Tank has about 10 gallons usable capacity.
  • Two GS-Plus spray heads, each with a “flip top” dust cover, internal flow control and filter. 1/2” IPS chrome plated brass stay-open ball valve with flag handle.
  • Drench Hose: Single GS-Plus spray head with “flip top” dust cover, internal flow control and filter. Chrome plated brass squeeze valve with stainless steel lever handle and 6 ft. reinforced PVC hose.
  • Quality Assurance: Unit is fully assembled, pressurized and water tested at the factory. Unit is depressurized and emptied prior to shipping. Some assembly required in field.
Check Stock

Makita AC001 Compact Air Compressor

  • Powerful 1/6 maximum horsepower induction motor provides up to 125 PSI.
  • Lightweight design (23.1 lbs.) for increased job site portability.
  • Low AMP draw reduces incidents of tripped breakers at start-up. Lever-handle ball valve tank drain improves easier maintenance and air tank release.
  • Roll cage construction for extra protection of pump and motor assembly.
Check Stock

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

  • ...ds at both ends matches 1/4in. NPT male brass fittings. Max working pressure: 175 PSI. Blasting Pressure: 475 PSI. Max Temperature: 200 degrees F..
  • This 1/4 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
  • The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
  • There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different diameters. Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or fitting with different diameters Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
Check Stock