Top Ball Valves And Fittings

Wostore Flaring Swage Tool Kit for Copper Plastic Aluminum Pipe With Tubing Cutter & Ratchet Wrench

  • 【ALL IN ONE KIT】：The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings, 1 tubing cutter, 1 ratchet wrench and 1 storage case..
  • 【EXTENSIVE RANGE OF FLARE ADAPTERS】：Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D. tubing..
  • 【COMMON SWAGE FITTINGS】:Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring....
  • 【PRACTICAL TOOLS】:Tube cutter:1/8"-1-1/8" (3-28MM) Pipe, Ratchet wrench:3/16",1/4",5/16",3/8" for square valves, such as valves on hose bibs and....
  • 【DURABILITY AND ACCURACY】:This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy....
Check Stock

Ultimate Washer 18717 Pressure Washers Stainless Male Nipple, 3/8-Inch, 2-Pack, Replaces Legacy 89222220

  • 2 x STAINLESS STEEL 3/8″ Male Pipe Thread x 3/8″ Male Quick Connect Plug CHEMICAL RESISTANT for Long Life.
  • Withstands MAXIMUM PRESSURE up to 6000 PSI.
  • UNIVERSAL Fitting for most Gas Power Washers.
  • Fittings can be used to attach a pressure washer accessories to the water pumps, hose reels, ball valves, telescoping wands, surface cleaner or regular spray guns.
Check Stock

labwork Coolant Filtration Filter Kit Replacement for 2003-2007 Ford V8 6.0L Powerstroke Diesel

  • Replacement for 2004-2007 Ford E350 E450 Van V8 6.0l Powerstroke Diesel.
  • Replacement for 2003-2005 Ford Excursion V8 6.0l Powerstroke Diesel.
  • Replacement for 2003-2007 Ford F250 F350 F450 F550 Pickup V8 6.0l Powerstroke Diesel.
  • Warranty: 1 year warranty. If there is any problem after receiving, please contact us, and we must helps to solve it.
Check Stock

Lifynste Garden Hose Elbow Connector, 90 Degree Brass Garden Hose Elbow Adapter with Shut Off Valves

  • HIGH QUALITY MATERIAL: The brass hose elbow is made of 100% solid brass, durable, corrosion proof and has a long service time. Includeds 2 extra rubber washers included to prevent leaking..
  • ELIMINATE STRAIN: 90 degree garden hose elbow connector eliminates strain on hoses and water intake fittings, will extend the life of your garden hose by preventing twisting and straining..
  • CONVENIENCE: Standard 3/4 In. Our garden brass hose connector is designed to easily accommodate all standard hoses, equipped with high quality ball valves for easy and hassle free water flow..
  • THOUGHTFUL DESIGN: If your garden spigot is too close to the ground or wall, then our hose elbow connector is a must-have wonder. Perfect to change angle of conection, helps reduce unnecessary stress and strain on water intake hose fittings, easy to hook up water sprinkler timer, outdoor water faucet, great for garden, RV, lawn, etc..
  • PACKAGE INCLUDES: The 2 pack garden hose connectors comes with 2 pcs free rubber gaskets for replacement. TIPS: For outdoor use with cold water only. If for any reason you're not 100% SATISFIED, please let us know and our customer team will help you RETURN OR REFUND..
Check Stock

2 PCS Stainless Steel Ball Valves TWOZOZO Ball Valve Standard 60 Degree Female NPT Ball Valve with Raw Material Belts 1 Ball Valves

  • High Quality: TWOZOZO Stainless Steel Ball Valves Are Made Of High Quality Materials And Have Good Ductility To Effectively Avoid Cracking..
  • US Standard Threads: This Ball Valve Uses NPT 60 Degree Us Standard Threads, Please Fit Your Thread Diameter When Purchasing..
  • Wide Applications - Ball valves are widely used in mechanical equipment, industrial equipment, water supply and drainage equipment, for example in....
  • Easy To Use: Our Ball Valves Come With A Roll Of Raw Material, So You Don't Have To Re-purchase Them And You Can Install Our Ball Valves As Soon As....
  • High Performance - The internal passage of the drain tap is straight for optimum and complete passage and therefore has a low flow resistance. The....
Check Stock

Firestone W217602445 Ride-Rite Kit for Toyota Tundra

  • Levels vehicle front-to-rear and side-to-side , Fits 2007 to 2013 models.
  • Stabilizes vehicle while loaded and maximizes vehicles load carrying capacity.
  • Used on pick-ups, class A,B,C motorhomes, vans, commercial vehicles and SUV's.
  • Kit includes air springs, air line, fasteners, upper and lower brackets, inflation valves, push-to-connect air fittings and detailed instructions.
  • Levels vehicle front-to-rear and side-to-side , Fits 2007 to 2013 models..
  • Adjustability is between 5-100 Pascal per square inch.
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball lock disconn....
Check Stock

Hromee 8 Pieces Air Chuck Set with Dual Head Tire Chuck, Closed Ball Air Chuck and 1/4 Inch Male Air Plug, Heavy Duty Air Compressor Tire Inflation Tool

  • PACKAGE INCLUDES - The kit includes 2PCS dual head air chuck, 2PCS ball air chuck, 2PCS male air fittings and 2PCS thread tape..
  • DUAL HEAD CHUCK - with 1/4 inch FNPT air inlet, dual head chuck makes tire valves more accessible with the two heads for easier access. To use inner head when the valve is facing inward, which is great for reaching into dually trucks and other challenging angles..
  • CLOSED BALL CHUCK - Ball air chuck is ideal for tire inflation of various tires, including car, truck, SUV and bicycle tires. This air chuck features a built-in shut-off valve seals air when not in use and 1/4 in. NPT female threads..
  • EASY TO USE - All the chucks are female NPT so we equip 2 pieces male air plugs for easy connection. And 2 rolls of thread tape are for better seal..
  • HEAVY DUTY&STURDY - They are all made from steel and copper plated which features good corrosion resistance and wear resistance, you can use them for long time. Perfect for tire inflating and measuring the pressure..
Check Stock

PIPE DÉCOR 0000 LDR Industrial Steel Grey 1-1/4 x ½ -Inch Reducing Coupling Pipe Fittings (4-Pack), Dark Metal

  • Get Creative and Add Style To Any Home, Office Or Interior Space with LDR Pipe Decor fittings and connectors. From standard to unique and innovative fittings, the types of furnishings you can create are limitless.
  • Two pieces, 1-1/4 x ½ -Inch Reducing Coupling Pipe Fittings for compatibility with other project materials such as lamp parts, valves, etc..
  • LDR Pipe Décor Fittings and Attachments Are Made From The Highest Quality Materials. Great for all your Do It Yourself Industrial pipe projects. Can be painted any color to match your project!.
  • Standard Industrial Grey Finish, constructed from sturdy malleable iron Threads and materials, and meet ASME and ASTM standards.
  • This Item Is an Authentic Malleable Iron Fittings which gives a beautiful rustic look and requires necessary cleaning and sealing prior to use.
Check Stock

WILTEEXS 18709 3/8-Inch Stainless Steel Quick Connect Pressure Washer Adapter Set, Max Pressure 5000 PSI Rating

  • 【Special Improvement】Quick connect capable coupler with great fit, finish and function. There is no problem with attaching your quick couplers to this gun swivel. Allows you to spin gun on the hose which is extremely helpful when washing vehicles.
  • 【Quality Assurance】Any problem,feel free to contact us.The professional team is always ready to serve you.
  • 【Quality Assurance】Any problem, feel free to contact us. The professional team is always ready to serve you.
  • 【Compatibility】These high-pressure washer fittings can be used to attach a hose to the water pumps, hose reels, ball valves, telescoping wands, surface cleaner or regular spray guns.
  • 【Characteristics】3/8″quick connect pressure washer adapter set is made of high quality and durable stainless steel. More rust and corrosion resistant than brass material pressure washer accessories.
Check Stock

Watts Tankless Water Heater Service Valve Kit

  • TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
  • SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
  • MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
  • LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
  • WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..
Check Stock

SharkBite 1/2 Inch Disconnect Tongs for Push to Connect Brass Plumbing Fittings, U711

  • SHARKBITE REMOVAL TOOL: 1/2 inch disconnect tongs allow for brass push connect fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push to connect fittings in tight spaces for easy disassembly.
  • COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect tong is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
  • DURABLE AND HIGH QUALITY: Fitting remover is made with durable stainless steel and wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock