Top Banana Pi Compatible

New Version ATX Power Supply Breakout Board and Acrylic Case Kit with ADJ Adjustable Voltage Knob, Supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) Output Voltage, 3A Maximum Output, Reset Protection.

  • 1.ATX power supply breakout board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) output voltage..
  • 2.The voltage output terminals of the ATX power expansion board correspond to each screw terminal..
  • 3. At the same time, the panel is also equipped with an acrylic case kit for easy to use..
  • 4.Compatible with 3.3V: STM32 MCU, network communication equipment, such as Wi-Fi Bluetooth and other devices, generally for microcontrollers, and some low-power modules, etc. 5V: Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, USB interface, etc..
  • 5.Compatible with 9V: Arduino, motor drive, display driver module, etc. 12V: motor drive, LED light, vehicle equipment with power requirements less than 24w, etc..
Check Stock

MakerFocus Raspberry Pi 4 Power Expansion Board DockerPi Power Board 20W(5V 4A) Power Supply Safe Shutdown with Cooling Fan Infrared Remote Control Compatible with Raspberry Pi 4 and 3B+

  • DockerPi power board is used to power the Raspberry Pi (or similar SBC) with a typical power of up to 20W (5V/4A) and can run up to 25W (5V/5A) with good heat dissipation..
  • ★It also supplies power to other DockerPi modules to protect the safety of the power supply. It also provides a safe shutdown function, supports infrared remote control switches, button control switches. The link for the one-step automatic installation is obtained in the product description. Restart the Raspberry Pi and complete the installation.
  • ★It has 3*3cm quiet cooling fan, can effectively cool down. We recommend that install the power board on the bottom of the other DockerPi..
  • ★It is recommended to connect 12V 2A or above power input and 12V power from 4-pin headers to other DockerPi, If other modules require 12V power. Note: DockerPi Power Board does not support hot plug..
  • ★Official compatibility test. Support Raspberry Pi, Banana Pi M3, Orange Pi Zero. Other development boards can be compatible if they have I2C peripherals. Note: maybe need to change some software..
Check Stock

MakerSpot Micro USB OTG Hub for Raspberry Pi Zero 4 Port High Speed Sync and Extension Cable Adapter Also Works with Android Tablet Raspbian Jessie Linux

  • Expands into 4 USB Ports for Raspberry Pi Zero v1.3 (with camera connector) and W (with Bluetooth and Wifii), Orange Pi, ODROID, Banana Pi.
  • Compatible with Samsung Galaxy S2, Samsung Galaxy Note, Samsung Galaxy S3/S4, Galaxy Tab3 8.0, Sony Xperla NX-02D, Sony Xperla acro HDIS12S.Toshiba REGZA Phone-TO1D, and Sony S-series Tablet..
  • Draws power only from OTG port, current for USB devices is limited to host capability.
  • With USB2.0 4-Port Hub, for Mouse, Keyboard, U disk, Camera, Printer and so on. Easy plug and play installation device, no external power needed No driver needed for Android and PC with USB 2.0 port Transfer Rate: USB2.0, 480/12Mbps, 1.5Mbps.
Check Stock

7inch HDMI LCD (H) (with case) 1024x600 Capacitive Touch Screen IPS Display HDMI Monitor with Toughened Glass Cover Case for Raspberry Pi 4/3/2/1 B B+ A+/Jetson Nano/Windows 10

  • Compatible with Raspberry Pi 7 inch touch display screen LCD, 1024x600 hardware resolution, configurable by software (up to 1920x1080),Toughened glass capacitive touch panel, 6H hardness.
  • Supports popular mini PCs such as Raspberry Pi 4/3/2/1 B+ B A+ zero zero w,Jetson Nano,BB Black, Banana Pi, as well as general desktop computers.
  • When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free,When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free.When works with Jetson Nano,supports Ubuntu, single point touch, driver free.
  • Multi languages OSD menu, for power management, brightness/contrast adjustment, etc..
  • 3.5mm audio jack, supports HDMI audio output, Also supports VGA input (specific cable is required and should be purchased separately),High quality PC case, optional tilt angle: 30°/50°.
Check Stock

GeeekPi 2-Pack I2C 1602 LCD Display Module 16X2 Character Serial Blue Backlight LCD Module for Raspberry Pi Arduino STM32 DIY Maker Project Nanopi BPI Tinker Board Electrical IoT Internet of Things

  • Use the i2c protocol to reduce the occupation of I/O ports, making it easier to add to the project, and less wiring is more beautiful..
  • Commonly used in: Internet of things, DIY project, home animation, smartbuilding, maker's DIY project..
  • Compatible with all current development boards, such as Arduino, Raspberry pi, Tinkerboard, Nano pi, Banana pi, stm32 and so on.
  • With a potentiometer used to adjust backlight (Color: Blue) and contrast.Power supply: 5v and I2C address is: 0x27 Module dimension: 80mm x 35mm x 11mm.
Check Stock

NORSMIC Raspberry Pi Screen, 7 inch Monitor, IPS HD 1024×600, Responsive Capacitive Touch,Dual Built-in Speakers,HDMI Input,Compatible with Various Devices and OS,Easy Assembly,Driver Free

  • ... to do a manual calibration.This raspberry pi 4 screen supports 5-point capacitive touch and multi-touch gestures such as tap,press,zoom in/out,click of the mouse. Furthermore, NORSMIC touch screen monitor works in various operating systems right out of the box with no additional drivers or setup needed..
  • ⭐[Widely Compatible with Various Devices and OS] Specially designed for Raspberry Pi, NORSMIC small hdmi monitor is perfectly suited for all versions of Raspberry Pi including Raspberry Pi 4/3/2/1/3B+/BB/400. You can also use this 7 inch monitor on other devices like Octo Pi, Banana Pi,Retro Pi, game consoles( NS / XBOX / PS4), computer, TV boxes etc..Besides, this portable gaming monitor has great compatibility with various OS such as Windows, Mac, Noobs,Debian, Ubuntu, Kodi..
  • ⭐{Dual Built-In Speakers} NORSMIC Raspberry Pi touchscreen features dual built-in speakers, delivering loud and trust sound. Speaker function will be a bonus for guys who want to use this IPS monitor to watch videos or play game emulators. Tips: Please go to audio setting and set this portable screen as audio output channel when the first time you connect it to your device..
  • ⭐{Sturdy Package & Comprehensive Accessories}NORSMIC provides considerate package with thick cotton....
Check Stock

Banana Pi BPI-M5 Amlogic S905X3 Single Board Computer with LPDDR4 4GB RAM and 16GB eMMC Storage for AIOT Support Android Debian Raspbian Armbian

  • [High Performance Processor] Amlogic S905X3 quad-core Cortex-A55 processor (2.0GHz).
  • 16GB eMMC onboard storage ---- MicroSD slot with support for up to 256GB expansion.
  • [4K Smart Home Audio and Video chip] Adopt quad-core 64-bit ARM-A55 architecture CPU chips, integrate G31 graphics processor, support 4K video decoding and 4K video output.
  • [SDK and Various System Operation Support] Banana Pi M5 support multiple various OS, like Android 9, and Raspbian and Linux system, as well as third party image Odroid Android image.
  • [Multifunction Interfaces] 4 x USB 3.0 ports.
  • Power Source: 5 volts at 3 amps via micro USB (TYPE C).
  • [Wifi & BT support via expansion board] BPI M5 support SDIO interface Wifi&BT, you can buy the WiFi&BT board, 802.11 a/b/g/n/ac 2T2R WiFi and Bluetooth 5.0..
  • [Wiki] https://wiki.banana-pi.org/Banana_Pi_BPI-M5.
  • If you have any after-sales problems, please contact monica @ smartfire.cn. Click "WayPonDEV" and ask a question or leave the message in our forum at "forum.youyeetoo .com/"..
Check Stock

EDIY 12.6 Inch Mini Screen 515x1920 IPS Strip Display USB HDMI LCD HD Sub Screen Aida64 Monitor for Raspberry Pi 4 3 2 Windows HDR with Driver Board

  • Ultra-HD 515*1920 high resolution IPS screen, excellent color reproduction and uniformity, brightness 250cd/m², contrast ratio 1200:1, show you a superior visual experience. IPS 178° full wider viewing angle suitable for sharing video with multiple people..
  • Supports Raspberry Pi 4/3/2/Zero/ B B+ A, Banana Pi. Compatible with like Ubuntu, Retro Pi, Debian, Kali, Windows 7/8/10, PC, Mac, Laptop, TV. Please note: Only R88-B support mac os system, R88-A does not support mac os system.
  • Also compatible with Switch/XBOX/PS4. Windows & mac OS system plug and play, no program or software support is required. Adjustable horizontal and vertical screen display in Windows system..
  • Outline Size 315.61×94.02×5.3(H×V×D).
  • This is a drive free display monitor. 1x mini HDMI and 1x micro USB ports. HDMI supports data and signal transmission, one USB provides power supply, no program or software support required. Drive free makes debugging so much easier..
  • Package include:1 x 12.6 inch screen and 1 x driver board.
Check Stock

ELECROW Raspberry Pi Touchscreen Monitor 5 inch Screen Display 800x480 HDMI-Compatible with Raspberry Pi 4 3B+ 3B 2B BB Black Banana Pi Jetson Nano Windows PC

  • 1. 5 inch small portable monitor with 800x480 mini LCD screen. The touchscreen is USB capacitive touch control, free-driver, plug and play, micro USB interface for touch and power supply, HDMI interface for displaying..
  • 2. The power button can be turn off to lower power consumption. Built-in OSD menu adjustment function (adjustable Contrast/ Brightness/Saturation, etc.) Support audio output..
  • 3. Can be worked as a Raspberry Pi screen, works well with the latest Raspberry Pi 4, 3 B+, BB Black, Banana Pi, Jetson Nano and other mainstream mini PC..
  • 4. Can be used as a general-purpose small HDMI-compatible screen, connecting computers, TV boxes and game consoles, or mounted inside your PC case as computer temp monitor, etc..
  • 5. Package includes: 5 inch touchscreen monitor x1, HD cable x1, Micro USB cable x1, DVDx1, copper screws pack (4pcs) x1.
Check Stock

for Raspberry Pi 7 inch Capacitive Touch Screen IPS Display HDMI LCD Module 1024×600 Touchscreen for Raspberry Pi 4 3/2/1 Model B B+ A+/BeagleBone Black/Banana Pi, Support Windows 10/8.1/8/7

  • ...displaying , USB Interface for touching. Backlight can be turned off to lower power consumption..
  • 7inch IPS screen with 1024x600 high hardware resolution , a ideal choice for those who want a large screen and larger image with high resolution..
  • The 7'' touchscreen supports Raspberry Pi 4 3 B/ B+ /2 B/B/ A+, BB Black, Banana Pi , Banana Pro and other mainstream mini-PCs , as well as , the LCD can work as a general desktop computers. When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free,When work as a computer monitor LCD, supports Windows 10/8.1/8/7, five-points touch, and driver free.
  • Note:1.Please set the config.txt file by addding [the hdmi_drive=1] into the end of code if you connect it with raspberry pi (like Quick Start in picture). Otherwise the LCD could not work properly.2.If the LCD work in abnormal states for long time, it may be broken if you don't set the config.txt file at the beginning.After setting config file,please power off the screen and put it aside for a few hours to avoid the flickers..
  • Note:If you use the LCD with Raspberry Pi 4B, you need to remove line dtoverlay=vc4-fkms-V3D from config.txt file.Please read the product detailed page carefully before using this LCD.And please follow the user g....
Check Stock

HAMTYSAN Raspberry Pi Mini Screen Monitor, 7 Inch Portable Screen 800x480 HDMI Small Monitor IPS LCD Screen Display for Raspberry Pi 400/4/3/Zero/Jetson Nano/Orange Pi/Win11/10/8/7, No-Touch

  • ..., HDMI interface for display. No need any driver, easy to assemble and use. Perfectly designed for Raspberry Pi, including Raspberry Pi 400/4/3/2/1/3B+/BB, Octo Pi, Banana Pi,Retro Pi,BB Black, Jetson Nano and other mainstream mini PC, game consoles(NS/XBOX/PS4), Laptop, TV boxes and etc.The HDMI small monitor also compatible with various OS such as Windows(7/8/10/11)/Noobs/Debian/Ubunt/Kodi etc..
  • ⚡️【Unique Design and Warm Tips】- The 7 Inch small hdmi monitor is portable, no case but with a bracket, easy to stand directly on the table. ※NOTES: 1). NO COVER at the back of the monitor. 2). NO WORK for Mac System or PS5. 3). NEED an extra Micro HDMI to HDMI cable if connected to Raspberry Pi 4..
  • ⚡️【3-in-1 Display Modes 】- With 3-in-1 display modes (copy mode/extension mode/second screen mode), providing your life and work more convenience. HDR mode can upgrade the image to a new level, offering you with brighter highlights, delicate colors and images..
  • ⚡️【Warranty Guarantee】- HAMTYSAN targetted to offer best shopping experience for every customer, we offer 24hrs email to solve any problem, be free to email us if necessary..
Check Stock

kuman 7 Inch Capacitive Touch Screen TFT LCD Display HDMI Module 1024x600 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems SC7B

  • Plug and Play Ports►This Raspberry pi touch screen has 2 micro USB ports for Power and Touch, and 1 HDMI port for Signal. It is plug and play....
  • IPS Screen Wider Viewing Angle►This IPS screen with 1024x600 resolution provides wider 178° viewing angle and superior image color..
  • Support All Standard HDMI Devices►Works with all device with standard HDMI interface and support BB Black,Banana Pi/Banana Pro, Lubuntu, Raspbian,....
  • Touch Function►Support Windows system 10 / 8.1 / 8 / 7, Five point touch, Free drive. Support Pi Raspberry 4 3 2 1 A B A+ B+, Raspbian, Ubuntu,....
  • Driver and Source Code►Instruction of this 7 inch touch screen with friendly service provided. You can also refer to QA for more question..
Check Stock