Top Barb Hose Fittings

Minimprover 4PCS 1/4 ID Hose Barb Thru-Bulk Head Hex Union Brass Straight Fitting with Flat Washer Gasket Water/Fuel/Air

  • ★ 【Material】: Solid Brass construction. Durable Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • ★ 【SIZE】: 1/4" Hose Barb x 1/4" Hose Barb.Thru-Bulk Bulkhead Fittings is connect with 1/4" ID hose with the same size..
  • ★ 【Introduction】: Smooth surface and inner wall, durable Light and Small. Exquisite craftsman makes it safe and reliable.Bulkhead union coupling for connecting two hoses with the same diameter in a straight run.Barbed fitting for a tight seal on hoses..
  • ★ 【Applications】: The fittings are fixed with 2 Gaskets and 1 fixed six corner, 1 movable six corner nuts form bulkhead tank function.Wide range of use: suitable for applications in water,fuel,air and etc..
  • ★ 【Package Include】: 4 Pack 1/4" to 1/4" hose barb.It comes with 1 year warranty..
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....
Check Stock

EVIL ENERGY 6AN Female to 3/8 Push on Hose Barb Fitting Adapter Straight Swivel Aluminum Alloy Black

  • Female 6AN to 3/8 inch push on hose barb connector is made of aluminum alloy 6061-T6 for the transition from pipe threaded connector to hose ,which is....
  • -6AN thread size is 9/16 UNF, used for 6AN male thread fitting.
  • The barb can use in 3/8" inner diameter fuel hose..
  • Simple installation - Female thread adapter: only need to tighten the thread.barb adapter: put the hose over the barb and use a hose clamp to tighten....
  • Note：Barbed style fittings are limited to relatively low pressures(usually below 4000 psi)due to the limitations of the soft and flexible....
  • EVIL ENERGY provide this product have 3-month warranty.Please contact us first if you have any doubts after receiving the product..
Check Stock

Beduan Stainless Steel 1/4 Hose Barb 3 Way Y Shaped Union Home Brew Fitting

  • Material: Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
  • Size: 1/4”Barb x 1/4”Barb x 1/4”Barb.
  • Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately)..
  • Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation..
Check Stock

Class A Customs | T-1000-BPK| 10 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 10 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 19” Longest Length (not including fittings) x 9” x 14” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....
Check Stock

Class A Customs | T-2100-BPK| 21 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 21 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 34” Longest Length (not including fittings) x 9” x 16” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....
Check Stock

Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 40 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 39 1/2” Longest Length (not including fittings) x 13” x 18” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe....
Check Stock

Class A Customs | T-3000-BPK| 30 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male ....
Check Stock

DERPIPE Stainless Steel 1/4 Hose Barb 3 Way Tee T Shape Union Barbed Splitter Fitting （pack of 2

  • Size: 1/4"Barb x 1/4"Barb x 1/4"Barb (6mm)..
  • Material: 304 stainless steel cast pipe fitting ,heavy duty,last for long lifetime,resistant to corrosion,low magnetic permeability..
  • Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not included)..
  • Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, etc..
Check Stock

Da by 2 pcs 3/8 10mm Brass Tee Barb Fittings for 3/8 ID Hose,6 pcs Stainless Steel Pipe Clamps,3 Way Union Intersection for Water/Fuel/Air T

  • Packaging Includes：2 Brass hose barb tee fittings, they have three barb 3/8" x 3/8" x 3/8", 6 Stainless steel pipe clamps fit hose outer diameter of 13mm-19mm..
  • Material: Hose barb made of brass. Pipe clamps all components are all made of 304 stainless steel and will not rust..
  • Solid Connections:The T shaped hose barb can be solid connected to the hose（Fit hose witch inner diameter of 10mm）,The pipe clamps can create a tight seal on flexible or semi-rigid hose..
  • Characteristic: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Stainless steel for corrosion resistance and will not rust, super sturdy..
  • Heavy T Shaped Brass Barbs and thickened wall, higher strength and very rugged..
Check Stock

Class A Customs | Under Mount 20 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit UM-2000-BPK

  • 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 13” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Th....
Check Stock

ANPTGHT Hose Barb Fitting Elbow 3/8 Hose Barb x 1/2 Male NPT Barbed Adapter for Fuel Gas Liquid Air Pack of 5

  • 【Material】Plastic barb connector, made of high-quality PP（Polypropylene） material.
  • 【Size】3/8" Hose Barb x 1/2" Male Male thread..
  • 【Usage】Plastic hose barb can be easily connected with tubing hose line and female thread..
  • 【Advantage】 Barbed fittings can be used with PVC, PU, Rubber hose or tubing Easy to install and not easy to drop off, good strength and durability..
  • 【Wide range of use】Suitable for applications in pharmaceutical, food and beverage, laboratory and others..
Check Stock