Top Barbed Hose Fittings

50 Pcs Drip Irrigation Coupling Fittings 1/4 Drip Irrigation Tubing Straight Coupling/Single Barbed Connectors for Universal 1/4 Inch Irrigation Tubing

  • ✔【High Quality】: Made of high-impact, high-strength plastic material, Durable, strong, water resistant.
  • ✔【Fits 1/4 inch irrigation hose】: This irrigation straight coupling connectors connect two sections of any brand 1/4" drip irrigation tubing in a straight line. Two barbed ends makes the connection more strong and firm. Kindly Note:Please check the size carefully before purchasing..
  • ✔【Easy to Install】: This coupling fittings for 1/4 inch irrigation tubing is easy to be installed without glue, tools, or clamps. Push the tubing firmly over the tee fitting.Tips:Put the tubing end into 75°~80° hot water for 30 seconds before pushing them..
  • ✔【Wide Application】:This drip irrigation single barbed connector for 1/4 inch irrigation tubing helps to build a maintenance-free irrigation system, it is ideal to be applied for garden, greenhouse, flower bed, patio and other agricultural watering system..
  • ✔【 Package Included】: 50 pieces of 1/4 inch barbed straight coupling fittings connectors are included in..
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball lock disconn....
Check Stock

280 Pcs Barbed Connectors Irrigation Fittings Kit,Drip Irrigation Barbed Connectors 1/4 Tubing Fittings Kit for Flower Pot Garden Lawn Straight Barbs,Single Barbs,Tees,Elbows,End Plug,4-Way Coupling

  • ...enient and will not leak easily，just push the tubing firmly over the barbs for a tight fit, they don‘t need others tools. Please put these drip irrigation accessories in 70-80 ° water for 10 seconds before assembly, the tube will remain tight after cooling.
  • Large quantities: 280 matching kits total, Hose Elbows Fittings (25pcs), Barbed Hose End Plug (25pcs), Oblique Barbed 4-way Connector (25pcs), Single barbs (30pcs), Straight Barbs (100pcs), Oblique Barbed Tees (75pcs).
  • High-quality materials: These irrigation fittings are made of high-quality plastics, safe and non-toxic, with strong pressure resistance, durability and corrosion resistance, lightness and wear resistance, can maintain you for a long time and have a long service life..
  • Widely used: These drip irrigation accessories connectors are ideal for vegetable gardens, flower beds, elevated garden beds, lawns, gardens, vineyards, forest gardens, farm, residential, greenhouse gardening, and agricultural irrigation applications, with strong practicability for you.
  • Note: Please confirm your size before purchasing. These irrigation kits are designed with barbs and can be used to connect 1/4 inch drip irrigation pipes. Please check the size carefully before purchasing；If needed, you can use a he....
Check Stock

60 Pieces Drip Irrigation 1/4 Barbed Tubing End Plugs,Barbed Connectors End Cap for Drip or Sprinkler Systems

  • 【Great Value】：Comes with 60 pieces barbed end plug fittings in total,enough to meet your daily use..
  • 【DURABLE MATERIAL】：Made of high-impact,UV-resistant and chemical-resistant materials,durable and reliable to assure a long life using time..
  • 【BARBED DESIGN】：drip irrigation plugs tight fits universal 1/4" drip tubing,barbed design ensures the tubing will not slip and leak..
  • 【EASY TO INSTALL】:barbed hose end plug is easy to be installed without glue, tools, or clamps.Push the tubing firmly over the end plug fitting.Warm tips:Put the tubing end into 75°~85° hot water 10 seconds before pushing them..
  • 【FOR WIDE APPLICATIONS】:closure goof hole plugs are Great for use with raised garden beds,lawn,greenhouse gardening and agricultural watering applications..
Check Stock

ABN Fuel Injection Pressure Test Kit – Comprehensive Universal Set with Improved Flex Hoses, Fittings, and Instructions

  • ...nd pressure release valve fitting with long drain hose to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel.
  • Fuel injection pressure gauge displays reading 0-100 PSI and 0 to 7 Bar.
  • FITS YOUR VEHICLE: Automotive fuel pressure test kit adapters fuel gauge kit has all necessary fittings to attach to a pressurized system.
  • Will work on any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
  • Recommended for older low-pressure systems with mechanical fuel pumps.
  • Not compatible with Bosch, CIS-Jetronic, or GM throttle body systems.
  • EASY STORAGE: Heavy-duty 2.3” x 12.8” x 11” inch (5.8cm x 32.5cm x 27.9cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization of each component of this fuel injection pressure kit.
  • PACKAGE CONTENTS: Fuel tester kit gas pressure test gauge package is a comprehensive kit of adapters and fittings.
  • Comes with flex hoses, fittings, and instructions for quick reference.
  • Includes Brass 1/8"-27 NPTx1/4"-18NPT, Brass 1/4" Barbed x 1/4"-18NPT, Aluminum 1/4" & 3/8 Barbed x 1/8-24NPT, 3 Rubber Hoses 1/4" x 2.5" L, 3/8" x 3.0" L.
Check Stock

Two Little Fishies Hose Kit for Xaqua InOut

  • This Two Little Fishies Hose Kit for Xaqua InOut allows you to quickly plumb the Two Little Fishies Xaqua InOut Overflow and Return to your sump and....
  • The tubing will directly attach to the molded barbed fittings on the overflow box and then can be directed down into your sump. The return tubing will....
  • Specifications: 1X Soft Black Return Tubing.
Check Stock

Cimeton 32Pcs Drip Irrigation Tubing Hole Punch & Fittings Kit, Including 2Pcs Drip Irrigation Pipe Hand Puncher 2-in-One Punch Tools with 30Pcs Drip Irrigation Barbed Plugs End Closure Plugs Fittings

  • ❀【Package Included】: Cimeton drip irrigation tubing punch and fittings kit includes 2pcs drip irrigation tube hand punch (1pc professional hole punch and 1pc 2-in-1 punch tool).
  • and 30pcs drip irrigation fittings: 20pcs straight barbed plugs and 10pcs figure 8 end closure plugs, 32pcs in total. This is a practical tool kit to meet your daily gardening and irrigation needs..
  • ❀【Long-Lasting】: Made of durable plastic, these punch tools and irrigation fittings are sturdy and safe, non-toxic, have well performance of water, UV and chemical resistance. And the hole punchers have been polished so it will not become dull, which ensure a longer service life..
  • ❀【Tube Hole Punchers】: Our irrigation tube punchers are designed to fit for drip tubing punch and 1/4" fitting insertion use, match with PE pipes with a diameter of 16/20/25mm. Punch hole size measures approx. 3mm. These tube hole punchers are mainly used to drill holes when installing drippers and micro sprinklers in PE pipe to ensure proper insertion of fittings, tubing and emitters for a tighter fit..
  • ❀【Irrigation Fittings】: Our straight barbed plugs are designed for quick connecting two side of 1/4" drip irrigation tubing or filling into a 1/2" drip irrigation pipe, and the....
Check Stock

Rain Bird T63-100S Drip Irrigation 1/2' (.630' OD) Blank Distribution Tubing, 100' Roll, Black

  • Rugged, flexible tubing that's easy to unroll and stake in garden, flower bed, ground cover or other landscaped areas.
  • Connects easily to your faucet, garden hose, or existing underground sprinkler head (with Rain Bird conversion kits).
  • Extra flexibility for kink-free installation, unmatched resistance to chemicals, algae growth and UV damage.
  • Self-dispensing coil reduces layout time and speeds installation.
  • Unique Micro-Porous design creates an ultra-tight connection to fittings.
  • Connect in any arrangement using Rain Bird 1/2" universal barbed or Easy Fit compression fittings and stakes (sold separately).
  • Tubing specifications: 0.634" outside diameter, 0.536" inside diameter, 0.049” wall thickness.
  • Operating pressure: 0 to 70 psi. Tap into side with barbed drip emitters and 1/4 in. tubing to run water directly to plants.
Check Stock

LeLuv Male-to-Male Quick-Release Fitting with O-Ring Single for Vacuum Pumps - Black

  • Barbed male-to-male 1/4 inch O-ring Fitting for hose-to-valve.
  • Made with medical grade nylon and nitrile o-ring. Mates to specifically-designed female fittings.
  • For use with 1/4 Inch (6.35 mm) inside diameter hose.
  • Allows you to maintain vacuum within the cylinder/cup when disconnected.
  • Specially design to fit LeLuv/Eyro brand cylinders and fittings with 100% guarantee. We do not guarantee that the item(s) will fit any other brands..
Check Stock

LeLuv Male-to-Male Quick-Release Fitting with O-Ring Single for Vacuum Pumps - Blue

  • Barbed male-to-male 1/4 inch O-ring Fitting for hose-to-valve.
  • Made with medical grade nylon and nitrile o-ring. Mates to specifically-designed female fittings.
  • For use with 1/4 Inch (6.35 mm) inside diameter hose.
  • Allows you to maintain vacuum within the cylinder/cup when disconnected.
  • Specially design to fit LeLuv/Eyro brand cylinders and fittings with 100% guarantee. We do not guarantee that the item(s) will fit any other brands..
Check Stock

Metalwork 2\ Tri Clamp to 1\ Hose ID Barbed Adapter SUS304 Sanitary Hose Pipe Fitting

  • Adapter for connecting pipes or fittings of different types.
  • Barbed fitting for a tight seal on hoses when used with a hose clamp (not included).
  • For use with rubber hoses: Barb: 1" Barb For Rubber, Plastic, TPU, or other hose.
  • Fits: 1.5" Tri Clamp / Clover / Sanitary Fitting.
Check Stock

Raindrip 63100UB Professional Hole Punch

  • Punch holes in supply tubing for easier insertion of ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Works anywhere along the length of supply tubing where you want to insert a micro fitting or dripper.
  • The Hole Punch Tool punches a hole in supply tubing to insert fittings to connect tubing or drippers with barbed inserts.
  • Holds ½ in., 5/8 in., and 0.710 in. supply tubing to punch holes to fit ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Use with ½ in., 5/8 in., or 0.710 in. Supply Tubing to punch holes.
  • Hand-held tool is designed with a comfortable pistol grip for strain-free use.
  • Metal hole punch tip penetrates tubing wall when handgrip is pressed.
  • Sliding shelf on tubing rest slides out to accommodate larger sized tubing.
  • Comes with one Pistol Grip Hole Punch Tool.
Check Stock