Top Barbed Quick Connect Fittings

Kalolary 150 Pieces 1/4’’ Straight Barbed Connectors Fitting Drip Irrigation Fitting Drip Irrigation Barbed Coupling Single Barbed Connector for Irrigation Tubing System and Garden

  • 【Package Includes】150 pieces of 1/4 inch irrigation straight coupling connectors are included in 1 set. Sufficient quantity to use or take as backup,they are practical fittings for tubing..
  • 【Fits 1/4 inch irrigation hose】This barbed coupling fittings connect two sections of any brand 1/4" drip irrigation tubing in a straight line. Two barbed ends makes the connection more strong and firm. Note:Please check the size carefully before purchasing..
  • 【Long-lasting】Made of high quality engineering plastics, durable, strong, water resistant, chemical-resistant materials to assure long life..
  • 【Easy to Insatll】Directly insert this irrigation coupling at the ends of the water pipe, there is no need of any glue or tools, making garden work more convenient and much easier. Tips: Heat the end of hose to help it slide on this coupling..
  • 【Wide range of applications:】This coupling fittings for 1/4 inch irrigation tubing helps to build a maintenance-free irrigation system, it is ideal to be applied for garden, greenhouse, flower bed, patio and other agricultural watering system..
Check Stock

ABN Fuel Injection Pressure Test Kit – Comprehensive Universal Set with Improved Flex Hoses, Fittings, and Instructions

  • ...nd pressure release valve fitting with long drain hose to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel.
  • Fuel injection pressure gauge displays reading 0-100 PSI and 0 to 7 Bar.
  • FITS YOUR VEHICLE: Automotive fuel pressure test kit adapters fuel gauge kit has all necessary fittings to attach to a pressurized system.
  • Will work on any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
  • Recommended for older low-pressure systems with mechanical fuel pumps.
  • Not compatible with Bosch, CIS-Jetronic, or GM throttle body systems.
  • EASY STORAGE: Heavy-duty 2.3” x 12.8” x 11” inch (5.8cm x 32.5cm x 27.9cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization of each component of this fuel injection pressure kit.
  • PACKAGE CONTENTS: Fuel tester kit gas pressure test gauge package is a comprehensive kit of adapters and fittings.
  • Comes with flex hoses, fittings, and instructions for quick reference.
  • Includes Brass 1/8"-27 NPTx1/4"-18NPT, Brass 1/4" Barbed x 1/4"-18NPT, Aluminum 1/4" & 3/8 Barbed x 1/8-24NPT, 3 Rubber Hoses 1/4" x 2.5" L, 3/8" x 3.0" L.
Check Stock

BEADNOVA Drip Irrigation Parts 10 Pcs 1/2 Inch Barbed End Plugs Goof Plugs Drip Irrigation Fittings Drip Line Connectors for 1/2 Inch Irrigation Tubing Garden Watering System 10pcs

  • PACKAGE INCLUDES: Includes in a pack 10 pcs end plug barbed connectors, approximately 1.7” or 40mm long. Drip irrigation barded suitable for 1/2 Inch irrigation tubing..
  • STRONG MATERIAL: This end plug is made of high grade plastic which is strong and good for both indoor and outdoor use..
  • EASY INSTALLATION: Connect irrigation tubing by simply insert this barbed connector at the ends of the tube. No tools or glue required. Push the tube firmly into the irrigation barbed to avoid leakage. Soften the end of tube with blower if you find the tube is too stiff before inserting..
  • WIDE APPLICATIONS: These irrigation fittings are essential for watering system, drip system and sprinkle system in vegetable gardens, flower beds, greenhouse and patio. Use irrigation barbed to build yourself a minimal maintenance watering system, save water and energy..
  • COME WITH STORAGE BAG: Barded connectors are packed into a plastic bag for easy storage..
Check Stock

280 Pcs Barbed Connectors Irrigation Fittings Kit,Drip Irrigation Barbed Connectors 1/4 Tubing Fittings Kit for Flower Pot Garden Lawn Straight Barbs,Single Barbs,Tees,Elbows,End Plug,4-Way Coupling

  • ...enient and will not leak easily，just push the tubing firmly over the barbs for a tight fit, they don‘t need others tools. Please put these drip irrigation accessories in 70-80 ° water for 10 seconds before assembly, the tube will remain tight after cooling.
  • Large quantities: 280 matching kits total, Hose Elbows Fittings (25pcs), Barbed Hose End Plug (25pcs), Oblique Barbed 4-way Connector (25pcs), Single barbs (30pcs), Straight Barbs (100pcs), Oblique Barbed Tees (75pcs).
  • High-quality materials: These irrigation fittings are made of high-quality plastics, safe and non-toxic, with strong pressure resistance, durability and corrosion resistance, lightness and wear resistance, can maintain you for a long time and have a long service life..
  • Widely used: These drip irrigation accessories connectors are ideal for vegetable gardens, flower beds, elevated garden beds, lawns, gardens, vineyards, forest gardens, farm, residential, greenhouse gardening, and agricultural irrigation applications, with strong practicability for you.
  • Note: Please confirm your size before purchasing. These irrigation kits are designed with barbs and can be used to connect 1/4 inch drip irrigation pipes. Please check the size carefully before purchasing；If needed, you can use a he....
Check Stock

Legines 1/8 Hose Barb Tee 1/8 x 1/8 x 1/8 inch Brass Barbed T Fitting 3 Ways Hoses Connector 2 pcs

  • Barb tee is used to connect lines for air, fuel, oil and inert gases in a quick and simple way..
  • Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).For use with plastic or rubber hose.
  • Typical Application: Temperature control circuits, pneumatic circuits, vacuum and fluid systems test apparatus, lubricant, coolant lines.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

POHIR Pressure Washer Adapter Set, 14-Pack Quick Connect Fittings, 3/8 Power Washer Quick Disconnect Kit with M22 Swivel to 3/8'' Quick Connect, 3/4\ to Quick Release and M22 15mm to 14mm Male

  • 14-Pack Quick Connect Kit - 4-pieces Metric M22-14 female to 3/8 quick plug, 2-pieces m22 14mm female to 3/8 quick disconnect, 2-pieces M22 14mm male to 3/8’’ quick disconnect, 2-pieces M22 14mm male thread to m22 14/15 male, 2-pieces 3/4 female to 1/2 quick connect, 2-pieces 1/2 plug to 3/4 male.
  • Easy Connect & Disconnect - M22 quick connect fittings help pressure washer hose quick connect to pressure washer pump or gun. The 3/4 quick coupler fits all 3/4" GHT (garden hose thread) watering equipment..
  • M22 Male to Male - 1x M22 15mm male to 14mm male and 1x M22 14mm to 14mm male adapter, convert the metric M22 14mm male thread to the M22 14mm or 15mm swirl as needed..
  • High-Quality Brass Quick Connect - Made of solid brass, stainless steel and engineering plastics, for a safe and leak free connection. These quick connect fittings are durable, rust proof, providing secure fittings and are convenient for frequent connection. .
  • Warm Tips: Inner diameter of M22 -14 swivel is 14MM NOT 15mm. Do NOT use the threaded 14MM to connect M22-15mm fittings, or it will cause leakage. Please lubricate the accessories before use..
Check Stock

Dixon DCP2144B Brass Air Chief Industrial Interchange Quick-Connect Air Hose Fitting, Plug, 1/4\ Coupling x 3/8\ Hose ID Barbed

  • Air Chief industrial interchange quick connect coupler for connecting directly to a hose with barbed hose ID end for a greater hold on the hose.
  • 1/4" Air Chief industrial interchange quick connect plug with a 3/8 "ID barbed hose end.
  • Valveless construction allows flow when disconnected.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Interchanges with MIL-C-4109F/A-A-59439 specifications for quick-disconnect couplings for hoses and portable pneumatic tools, but not water or fluids, at maximum working pressures up to 232 psi (16 bar).
Check Stock

Utah Pneumatic Push To Connect Air Fittings Tube 3/8\ Od Straightair Air Line Union Push Fit Fittings Tube Fittings Air Line Push Connectors 10 Pack(3/8 Straight)

  • Air Line Quick Disconnect : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
  • Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
  • Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
  • You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
  • All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.
Check Stock

Gardrip 60 Pieces Drip Irrigation Elbow Fittings for 1/4 Inch Drip Tubing Barbed Elbow Corner 90 Connectors for Irrigation or Sprinkler Systems

  • 【Package Quantity】: Package includes 60 pieces of elbow hose connectors, which let you connect your irrigation systems as you wish.
  • 【Barbed Design】: The barbed ends grab tubing, which makes the tube connection more firm, and not easy to fall off, ensure a secure leak-proof connection..
  • 【Material】: The drip line elbows are made of high quality engineering plastics, solid and durable, ensure years of using..
  • 【Easy to Install】: It is easy to install without any glue, tools or clamps. Simply push the tubing firmly over the barbs for a very tight fit that won't leak..
  • 【Wide Application】: These elbow fittings are suitable for garden, lawn, greenhouse, patio and other watering drip irrigation system..
Check Stock

Cimeton 32Pcs Drip Irrigation Tubing Hole Punch & Fittings Kit, Including 2Pcs Drip Irrigation Pipe Hand Puncher 2-in-One Punch Tools with 30Pcs Drip Irrigation Barbed Plugs End Closure Plugs Fittings

  • ❀【Package Included】: Cimeton drip irrigation tubing punch and fittings kit includes 2pcs drip irrigation tube hand punch (1pc professional hole punch and 1pc 2-in-1 punch tool).
  • and 30pcs drip irrigation fittings: 20pcs straight barbed plugs and 10pcs figure 8 end closure plugs, 32pcs in total. This is a practical tool kit to meet your daily gardening and irrigation needs..
  • ❀【Long-Lasting】: Made of durable plastic, these punch tools and irrigation fittings are sturdy and safe, non-toxic, have well performance of water, UV and chemical resistance. And the hole punchers have been polished so it will not become dull, which ensure a longer service life..
  • ❀【Tube Hole Punchers】: Our irrigation tube punchers are designed to fit for drip tubing punch and 1/4" fitting insertion use, match with PE pipes with a diameter of 16/20/25mm. Punch hole size measures approx. 3mm. These tube hole punchers are mainly used to drill holes when installing drippers and micro sprinklers in PE pipe to ensure proper insertion of fittings, tubing and emitters for a tighter fit..
  • ❀【Irrigation Fittings】: Our straight barbed plugs are designed for quick connecting two side of 1/4" drip irrigation tubing or filling into a 1/2" drip irrigation pipe, and the....
Check Stock

SUNGATOR 3 Pack Barbed Brass Hose Fittings 1/2 Barb to 1/2 NPT Male Threaded End Fittings Hose Connector Adapter with Sealing Tape and Hose Clamps

  • 【SIZE AND PACKAGING】: 1/2"barb X 1/2"NPT male pipe, package includes 3 hose barb fittings, 1 sealing tape, 3 hose clamps.
  • 【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
  • 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
  • 【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
  • 【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel as well as air tools.
Check Stock

PVC Barbed Tee Fitting - 3/4 PVC Tee Barb Fitting - 3/4 Inch Barbed Insert Tee - Hose Barb Fittings for Tubing Hose Water Line - SCH 40 Barbed Hose Tee Fitting – Barbed Tee PVC Fitting

  • TOP QUALITY: The water line barbed fitting tees are carefully manufactured under strict quality guidelines and in full compliance with ASTM. Only the highest-grade PVC materials are used offering you the best durability.
  • MEASUREMENTS: 3/4 Inch barbed Insert x 3/4 Inch barbed Insert x 3/4 Inch barbed Insert barbed tee. Pipe Fitting Class is Sch 40 with Max. Temp of 140 F. Max Pressure 200 psi @ 72 Degrees F. Tee Fitting Connection Type is Insert x Insert x Insert.
  • WIDE APPLICATION: PVC Barb Tee Fitting can be used for running water lines as flexible tube and hose fittings at home, RV or any commercial plumbing systems.
  • EASY TO INSTALL: PVC tee hose fittings are lightweight and require no professional knowledge. The fitting process is simple and effortless. PVC can be cut, shaped, welded and joined easily.
  • MADE IN USA: Our PVC hose connectors are produced in US and have clear environmental advantages over traditional materials - 100% recyclable with increased wear resistance.
Check Stock