Top Bare Thermocouple Wire

Jiffy J-2M Gray Steamer w/Metal Head/NEMA 5-15, 120V Cord Set

  • Probe Size : 90 x 1.5mm / 3.5" x 0.06" (L*D).
Check Stock

3.5mm Mono Plug to Bare Wire 2 Pack 6ft Aux to Speaker Wire 1/8 2 Pole TS Male Piug Connector to Open End RFAdapter Audio Cable Repair

  • Perfect for most speakers, PA horns, amateur radios, scanners, morse key, cooling fans, power amp and other voltage trigger applications..
  • 3.5mm mono 2 pole male plug to bare wire,the red bare wire is the positive and the white bare wire is negative..
  • It is very easy to handle, connect the corresponding bare wires together, wrap and seal the bare wire with insulating tapes. Nickel plated plug, 26AWG....
  • Package include : 2 pack 6ft 3.5 mono plug to bare wire.
  • We offer worry-free warranty and friendly customer service within 12 months for your confident purchase. If you are not satisfied with any product,....
Check Stock

ennoLogic Volt mA Thermocouple Loop Process Calibrator eC370T - 0-20V and 4-20mA Simulator – Portable Millivolt mA and Temperature Signal Generator and Meter for Transmitters Current Loops PLC

  • VERSATILE AND ACCURATE VOLT MA THERMOCOUPLE CALIBRATOR: Signal generator, simulator and volt / mA meter for calibrating, testing and repairing milliamp loops, thermocouples, PLC, temperature control and HVAC systems. Easily generate precise test signals for current and voltage devices (mA, mV, V, Celsius and Fahrenheit ranges)..
  • NUMERIC KEYPAD for ease and flexibility in setting output signals configuring options. HOTKEY programming for each numeric key (long-press immediately outputs user-configured voltage, current or temperature signal). RAMP AND LADDER OUTPUT FUNCTIONS can be custom configured. BUILT-IN 24V LOOP SUPPLY lets you power and read a device or transmitter without needing another multimeter. This greatly simplifies testing 2-wire current loops..
  • MEASURE VOLTAGE OUTPUT SIGNALS from process devices and sensors with two input ranges of 0-100mV (0.01mV resolution, 0.06% accuracy) and 0-20V (1mV resolution, 0.08% accuracy). MEASURE CURRENT TRANSMITTERS within a range of 0 to 24mA with 0.001mA resolution and 0.08% accuracy. MEASURE THERMOCOUPLE TEMPERATURES within a range of -250°C to +1800°C and resolution of ±0.7°C to ±2°C (range and resolution depends on thermocouple type, supported are type K, J, E, T, N, S, R, and B.).
Check Stock

Fancasee (2 Pack) Speaker Wire RCA Female Plug Jack Connector Adapter to Bare Wire Open End Audio Video RCA Cable for Amplifier Receiver Speakers

  • This is speaker wire RCA female plug connector adapter to bare wire open end audio video RCA cable..
  • The speaker wire RCA female to bare wire cable is widely used to connect to CD DVD player, HDTV, speakers, stereo receiver, audio video av receiver, amplifier, tuner, home theater system, high fidelity HiFi system etc..
  • Center of the RCA plug connect to red wire, outer of the RCA plug connect to black wire. The red wire should be connected to the positive of the speaker, the black wire should be connected to the negative..
  • Black color, it is 10 inch length RCA female plug to bare wire speaker cable..
  • Package contents: 2-Pack RCA female plug to bare wire open end speaker wire cord cable..
Check Stock

Fancasee (2 Pack) Speaker Wire RCA Male Plug Jack Connector Adapter to Bare Wire Open End Pigtail Audio Video RCA Cable for Amplifier Receiver Speakers

  • This is speaker wire RCA male plug connector adapter to bare wire open end pigtail audio video RCA cable..
  • The speaker wire RCA male to bare wire cable is widely used to connect to CD DVD player, HDTV, speakers, stereo receiver, audio video av receiver, amplifier, tuner, home theater system, high fidelity HiFi system etc..
  • Center of the RCA plug connect to red wire, outer of the RCA plug connect to black wire. The red wire should be connected to the positive of the speaker, the black wire should be connected to the negative..
  • Black color, it is 10 inch length RCA male plug to bare wire speaker cable..
  • Package contents: 2-Pack RCA male plug to bare wire open end speaker wire cord cable..
Check Stock

Fancasee 2 Pack 6 ft Speaker Wire RCA Male Plug Jack Connector to Bare Wire Open End Pigtail RCA Cable for Speakers Amplifier Audio Video AV Receivers

  • This is speaker wire RCA male plug connector adapter to bare wire open end pigtail audio video RCA cable..
  • The speaker wire RCA male to bare wire cable is widely used to connect to CD DVD player, HDTV, speakers, stereo receiver, audio video av receiver,....
  • Center of the RCA plug connect to red wire, outer of the RCA plug connect to black wire. The red wire should be connected to the positive of the....
  • Black color, it is 6 ft length RCA male plug to bare wire speaker cable..
  • Package contents: 2-Pack 6 ft RCA male plug to bare wire open end pigtail speaker wire cord cable..
Check Stock

NEWREACH Thermocouple and Tilt Switch for Outdoor Patio Heater, Dump Switch for Propane Gas Patio Heater Pyramid Style Tower Heater Firesense Heater, Tilt Switch and Thermocouple Sensor Kit for Winter

  • This thermocouple and tilt switch kit is to fix the problem that the pilot light or flame does NOT stay lit, or the thermocouple is broken..
  • The safety dump switch will automatically stop the heater when it's tilted or dropped, prevent the occurrence of gas leakage when the fire is extinguished and the gas is still on, which is more secure..
  • Easy to install, just connect the probe to the ignition device, the thermocouple to the valve, and the other two ports to the safety dumping switch..
  • Works with propane gas patio heater, outdoor standing patio heater, pyramid-style tower heater, fire sense heater, dome-style heater, tabletop heater, Amazonbasics heater, Hampton Bay patio heater, Lowes patio heater, etc..
  • Thermocouple wire total 350mm with temperature resistance sleeves, with threaded M8*1 and M6. Suitable for weak dump switches with gas R ≤ 10mΩ. Please check the compatibility before purchasing this product..
Check Stock

K Type Thermocouple Temperature Thermocouple Sensor Temperature Detector Temperature Gauge with M4 Thread for 3D Printer Temperature Sensor

  • Type K (chromel–alumel) is the most common general-purpose thermocouple with a sensitivity of approximately 41 µV/°C.[10] It is inexpensive, and a wide variety of probes are available in its −200 °C to +1350 °C (−330 °F to +2460 °F) range. Type K was specified at a time when metallurgy was less advanced than it is today, and consequently characteristics may vary considerably between samples. One of the constituent metals, nickel, is magnetic.
  • a characteristic of thermocouples made with magnetic.
  • They operate very well in oxidizing atmospheres. If, however, a mostly reducing atmosphere (such as hydrogen with a small amount of oxygen) comes into contact with the wires, the chromium in the chromel alloy oxidizes. This reduces the emf output, and the thermocouple reads low. This phenomenon is known as green rot, due to the color of the affected alloy. Although not always distinctively green, the chromel wire will develop a mottled silvery skin and become magnetic. An easy way to check for t.
  • Hydrogen in the atmosphere is the usual cause of green rot. At high temperatures, it can diffuse through solid metals or an intact metal thermowell. Even a sheath of magnesium oxide insulating the thermocouple will not keep the hydrogen out..
Check Stock

Thermocouple & Tilt Switch for Patio Heater, Thermocouple and Dump Switch Repair Kit for Propane Patio Heater Glass Tube Patio Heater Gas Heater, Thermocouple Replacement for Tower Heater, 2 Pack

  • Purpose - This patio heater repair kit is to solve problem of pilot light not staying lit and heater not ignited. Problem can usually be fixed by replacing thermocouple and dump switch correctly..
  • Wide Application - Suitable for thermoelectric gas heater, outdoor propane heater, glass tube patio heater, porch patio heater, standing patio heater, tower heater, Pyramid heater, Hampton Bay heater, etc..
  • Easy to Replace - Probe is connected to the ignition, thermocouple is connected to the valve, the other two ports are connected to the safety dumping switch. If you are handy, this repair kit can save you a new heater..
  • Dimension - The thermocouple wire has total length of 350mm with temperature resistance sleeve. It has an M8*1 fixed thread head with end thread nuts that are compatible with 8mm gas valves. 15A weak current safety dump switch for gas R≤10 mΩ. Probe is not threaded. Note: Check your lead lengths before purchasing..
  • Package included tilt switch X 2pcs, thermocouple X 2pcs..
Check Stock

120630-02 Pilot ODS for Vent Free Propane Gas Wall Heaters by DESA, Glo- Warm

  • The 120630-02 Pilot ODS assembly was used on many of the unvented LP Gas wall heaters and LPG unvented gas log sets and fireplaces..
  • The 120630-03 Pilot ODS assembly take the 120790-01 Dual Wire Thermocouple. The 120790-01 Thermocouple Dual Wire 33 Inch Length with silver and brown transmitter wires that fits the Desa International Unvented Vent-Free infrared gas wall heater..
  • Many of the Unvented Gas Logs sets, Wall Heaters and fireplaces that used the 120630-02 Pilot ODS were made by DESA International and sold under many different brand names by Lowe's, Ace Hardware, Home Depot, Sears, Menards Store and other retailer throughout North America.
  • Some of the Brand Names were Vanguard, Comfort Flame, Glo-Warm, Cozy Heat, Kozy World, Pro Com, Desa International and others..
  • Replaces part numbers: 098245-01, 098245-03, 099440-02, 099440-06, 107667-02, 110803-02, ene 56817, ene 70366, J5527 F.
Check Stock

K-Type Scientific Digital Thermometer DM6801 with high Temperature thermocouple PK-1000

  • Digital k-type thermometer with one input and extra thermocouple PK-1000.
  • Temperature Range: -58.0 to 1999.0 °F (-50.0 to 1300.0 °C).
  • Resolution: 0.1°F or °C or K Accuracy: 2.2° or 0.75% Data Hold.
  • Comes with k-type thermocouple wire probe that measures up to 1832 degree fahrenheit (1000 degree Celsius).
  • Battery: 9V (included!) Dimensions: 6" x 3" x 1.5" (149 x 71 x 41 mm) Weight: 7 oz (200 g).
Check Stock

Mr. Heater Rotor Kit with Rotor Vanes Nylon Drive for 2003 or Newer Forced Air Kerosene Heaters

  • The 120630-01 Pilot ODS assembly was used on many of the unvented Natural Gas Gas wall heaters and NG unvented gas log sets and fireplaces..
  • The 120630-01 Pilot ODS assembly take the 120790-01 Dual Wire Thermocouple. The 120790-01 Thermocouple Dual Wire 33 Inch Length with silver and brown transmitter wires that fits the Desa International Unvented Vent-Free infrared gas wall heater..
  • Many of the Unvented Gas Logs sets, Wall Heaters and fireplaces that used the 120630-01 Pilot ODS were made by DESA International and sold under many different brand names by Lowe's, Ace Hardware, Home Depot, Sears, Menards Store and other retailer throughout North America..
  • Some of the Brand Names were Vanguard, Comfort Flame, Glo-Warm, Cozy Heat, Kozy World, Pro Com, Desa International and others..
  • The proper ODS Pilot Assembly must be used for the correct model number heater..
Check Stock