Top Baseboard Backplane

Baseboarders 2' Length Premium Baseboard Heater Cover Panel Only

  • Baseboarders Premium Series Open End Caps are available in both left and right (sold separately) sides. They are designed for heaters with pipes that continue straight through an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric b....
Check Stock

Baseboarders Premium Galvanized Steel Inside 90 Degree Corner Connector - White (Any Size)

  • Baseboarders Premium Series Inside 90-degree Corner is used to connect two panels that intersect at an inside 90 degree relation to one another with heaters pointing away from you.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will ....
Check Stock

Alphacool Eiswolf 2 360mm AIO GPU Cooler with Backplate RX 6800/6900 XT Nitro+

  • Active cooling backplate：The newly developed and designed graphics card backplane water block covers the entire back of the PCB, which effectively....
  • Jet type micro channel structure:The 0.5MM gap has strong passability, even when using color powder or nano-silver water-cooling liquid, it is not....
  • T2 high-purity copper plate: The heat-absorbing plate of the water block is made of the national standard T2 high-purity purple plate, the base....
  • Suggested water way: The new bridge module is used for Unicom's graphics card water cooling head and backplane water cooling head. It is small in size....
  • Heat dissipation cooling water-cooled head backplate: The water-cooled head is equipped with an exclusive backplane of high-quality electroplated....
Check Stock

Dreambaby Spacer Kit for Dreambaby Retractable Gate, Black

  • Compatible with Dreambaby Indoor/Outdoor Retractable Gate.
  • Retractable Gate Spacers are required when fitting Dreambaby Indoor/Outdoor Retractable Gate to baseboard/skirting boards.
  • Use to build up the wall areas equivalent to thickness of baseboard (skirting board).
  • Suitable for use with baseboard thickness .50" to .75".
  • NOTE: This product can be installed as hardware mounted (requires drilling holes).
Check Stock

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Coupler)

  • Baseboarders Premium Series Open End Caps are available in both left and right (sold separately) sides. They are designed for heaters with pipes that continue straight through an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only..
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric ....
Check Stock

Cable Matters Internal Mini SAS to Mini SAS Cable (Mini-SAS to Mini-SAS Cable) 1.6 Feet, 0.5m

  • This is Reversed Cable, 4x7Pin Sata is host, connect to the motherboard or RAID Controller with SATA ports. Mini SAS 36 (SFF-8087) is the target, connect to the Backplane with MINI-SAS port.
  • Before you buy this cable, please make sure the Mini SAS 36 (SFF-8087) on your backplane. If the Mini SAS 36 (SFF-8087) on your motherboard or RAID Controller, this cable will not work with them.
  • Mini SAS 36 (SFF-8087) connect to the Backplane, 4 x SATA connect to 4 Controller.
  • Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access.
Check Stock

Baseboarders Premium 4 ft Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (No Accessory)

  • Baseboarders Premium Series Panel only includes the replacement heater panel cover. Baseboarders Premium Series End Caps (Closed EC001-RT,LF-WHT, Open EC002-RT,LF-WHT, Zero ZC001-WHT)are sold separately. When combined with end caps the panel can span between 48”-51.5”.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Premium Series panels. They will not retrofit to existing baseboard heaters without a Premium Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electr....
Check Stock

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Zero Clearance End Cap)

  • Baseboarders Premium Series Zero Clearance caps are symmetrical, there are no left or right sides. Used when the original back plate terminates within ½” of adjacent wall. Designed to snap onto the ends of Premium Baseboarders.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher....
Check Stock

Baseboarders Elliptus Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (2 ft, Cover, No Accessory)

  • Baseboarders Elliptus Series Panel only includes the replacement heater panel cover. Baseboarders Elliptus Series Endcaps (Closed EC005-LF,RT-WHT, Open EC006-LF,RT-WHT, Zero ZC005-WHT) are sold separately. When combined with end caps the panel can span between 24”-27.5”.
  • Baseboarders Elliptus Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electri....
Check Stock

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Closed End Cap - Right)

  • Baseboarders Premium Series Closed End Caps are available in both left and right (sold separately) sides. They are designed for heaters with pipes that bend down into the floor or back into the wall. They do not continue into an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Premium Series panels. They will not retrofit to existing baseboard heaters without a Premium Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard hea....
Check Stock

Dimplex 50' Linear Convector Electric Baseboard Heater Model: LC5020W31), 240V/208V, 2000/1500W White

  • 2000W, 240V, 50", White, Baseboard Heater, 42% Shorter Than Traditional Baseboard, 40% Faster Heat Flow, Responds Quickly To Changes In Temperature.
  • Manufactured In China. Heater Type: Conventional Baseboard Heaters.
Check Stock

HIPTIS Baseboard Cleaner, Wall Cleaner with Ajustable 54'' Long Handle 4 Reusable Cleaning Pads for Baseboards Cleaning, Ceiling & Wall Clean in Minutes

  • Why Choose Us - HIPTIS wall cleaning tool is an unique patented design. It combines the functions of flat wall cleaning and baseboard cleaning, which is better than most in the market. Upgraded baseboard cleaner tool (Convex design) special design to clean your baseboards and moldings with ease..
  • Flexible Cleaner Head - 360 degree SWIVEL action lets you clean from any angle. It is conforms to any baseboard or door molding, especially cleaning the corner.And reinforced splice design keeps the mop head from collapsing or flipping around when sweeping high places..
  • Free Your Knees and Back - Anti-rust aluminum handle of HIPTIS Baseboard Cleaner is lightweight and adjustable. The handle can be extended up to 4.5 feet to accommodate various heights. The pole is equipped with a soft sponge handle, which has good anti-slip effect. Use the extension handle to clean hard to reach places. SAVE YOUR KNEES AND BACK..
  • Comes with 2 Microfiber Pads & 2 Chenille Pads - The cleaning head uses a paste design, which can change the microfiber or chenille pads at any time according to your cleaning needs. Change the pad in second! O....
Check Stock