Top Baseboard Heater 240s

Comfort Zone Howard Berger Co Electric Radiant Baseboard Heater CZ600

  • Heavy-gauge heating element for silent, even heating / 3-position rotary switch.
  • Electric baseboard heater model number: CZ600 / No assembly required.
  • Safety overheat protection system / Baseboard heater.
  • Stay-cool high-impact end panels / 750W to 1500W / Power indicator light.
  • Safety tip-over cut-off switch / Metal body / Mesh grill cover.
Check Stock

Baseboarders Premium 4 ft Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (No Accessory)

  • Baseboarders Premium Series Panel only includes the replacement heater panel cover. Baseboarders Premium Series End Caps (Closed EC001-RT,LF-WHT, Open EC002-RT,LF-WHT, Zero ZC001-WHT)are sold separately. When combined with end caps the panel can span between 48”-51.5”.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Premium Series panels. They will not retrofit to existing baseboard heaters without a Premium Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electr....
Check Stock

Cadet F Series 49 Portable Electric Baseboard Heater Model 4P1500W Part 05601 5120 BTU 120 Volt 1500 Watt White

  • Convection heats the room rapidly, without uneven hot and cold zones, providing comfort from floor to ceiling..
  • Wire up and connect this baseboard quickly and easily with its large wiring compartment, dual knockouts and built-in cable clamp..
  • For worry-free warmth, the unit's overheat protection feature prevents the heater from running when its air intake is blocked..
  • This baseboard heater installs unobtrusively in bedrooms, bathrooms, living rooms and dens, thanks to its low-profile design..
  • This baseboard model is UL listed to provide safe heating even when mounted flush to the wall or directly on flooring, tile or carpet..
Check Stock

Baseboarders Elliptus Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (2 ft, Cover, No Accessory)

  • Baseboarders Elliptus Series Panel only includes the replacement heater panel cover. Baseboarders Elliptus Series Endcaps (Closed EC005-LF,RT-WHT, Open EC006-LF,RT-WHT, Zero ZC005-WHT) are sold separately. When combined with end caps the panel can span between 24”-27.5”.
  • Baseboarders Elliptus Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electri....
Check Stock

NeatHeat Inside Corner 135 Baseboard Heater Cover

  • Baseboarders Basic Series Inside 90-degree Corner is used to connect two panels that intersect at an inside 90 degree relation to one another with heaters pointing away from you..
  • Baseboarders Basic Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will bec....
Check Stock

Sterling Heatrim Baseboard RA-ECR-03 Heatrim Hydronic Baseboard Heater End Cap, Right, 3'

  • Manufacturer: STERLING HEATRIM BASEBOARD.
  • Heat rim Hydronic Baseboard Heater End Cap, Right, 3 In. - 520014.
Check Stock

DIMPLEX NORTH AMERICA LC4015W31 1500W 40' Base Heater, White

  • 1500W, 240V, 40", White, Baseboard Heater, 42% Shorter Than Traditional Baseboard, 40% Faster Heat Flow, Responds Quickly To Changes In Temperature.
Check Stock

DIMPLEX NORTH AMERICA LC6025W31 2500W 60' Base Heater , White

  • 2500W, 240V, 60", White, Baseboard Heater, 42% Shorter Than Traditional Baseboard, 40% Faster Heat Flow, Responds Quickly To Changes In Temperature.
Check Stock

Baseboarders 2' Length Premium Baseboard Heater Cover Panel Only

  • Baseboarders Premium Series Open End Caps are available in both left and right (sold separately) sides. They are designed for heaters with pipes that continue straight through an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric b....
Check Stock

DIMPLEX NORTH AMERICA LC2005W31 500W 20' White Base Heater

  • 500W, 240V, 20", White, Baseboard Heater, 42% Shorter Than Traditional Baseboard, 40% Faster Heat Flow, Responds Quickly To Changes In Temperature.
  • Package dimensions : 6.62 inches (H) x 20.0 inches (L) x 2.38 inches (W).
Check Stock

Baseboarders Premium Galvanized Steel Inside 90 Degree Corner Connector - White (Any Size)

  • Baseboarders Premium Series Inside 90-degree Corner is used to connect two panels that intersect at an inside 90 degree relation to one another with heaters pointing away from you.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will ....
Check Stock

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Coupler)

  • Baseboarders Premium Series Open End Caps are available in both left and right (sold separately) sides. They are designed for heaters with pipes that continue straight through an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only..
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric ....
Check Stock