Top Bat signal Pin

Winncon PWM Fan Splitter Cable 1 to 2 Converter, Black Case Fan Splitter Cable, Case Fan Power Duplicator Converter, Dual Case Fan Power Adapter, 10.6 inch (1 Pack)

  • ❤One Divinded into Two: one 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
  • and one 3 pin fan connector omits the RPM signal pin for tandem fan speeds with both fans.
  • ❤Keep Same Speed: 4-Pin receptacle connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using software from a motherboard equipped with PWM control.The fan adapter is compatible with 3-pin and 4-pin PC fans..
  • ❤Increase Airflow: This PWM fan splitter cable connects 2 computer case fans to a single motherboard fan header to increase airflow in your computer case, adding ventilation and regulating the fan speed in a computer case ..
  • ❤High quality: The cooling fan cable is covered with fine plastic for long-term years’ use. High quality high density black sleeved able, 24AWG, and the length is about 10.6 inch (27cm)..
  • ❤This Dual Case Fan Power Adapter is compatible with popular brands of computer case cooling fans, and can be used for a motherboard 4pin interface powering for multiple cooling fans and PWM speed control, lengthen and extend the motherboard 4-pin interface..
Check Stock

Cable Matters 2-Pack 2 Way 4 Pin PWM Fan Splitter Cable - 4 Inches

  • PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
  • 1 to 2 case fan splitter connects an additional fan to increase airflow in your computer case.
  • Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using software from a motherboard equipped with PWM control.
  • Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
  • The computer fan splitter omits the RPM signal pin for tandem fan speeds with both fans.
  • Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
  • Sleeved and wrapped black 4-inch PWM Y cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler Master Blade Master 80 / Master 92, Cooler Master Hyper 212 EVO 120mm, Cooler Master JetFlo 120mm, Cooler Master SickleFlow 120mm, Cooler Master MegaFlow 200mm, Noctua NF-F12, Thermaltake WATER 3.0 Dual 240.
Check Stock

Heayzoki Motherboard Front Panel Socket Plugin Port USB3.0 19P/20P to TypeE Computer Accessories,with Stable Signal, Strong Anti-Interference Ability.

  • The advantage of turning 19Pin on the mainboard or 19Pin on the expansion card to Type-E interface, vertical transfer, small size and no interference in other positions..
  • Multilayer circuit board, integrated differential signal optimization technology, stable signal, strong anti-interference ability..
  • The signal is stable, and the anti-interference ability is strong. It supports all motherboard USB3.0/3.1 (19PIN) interfaces..
  • This motherboard front panel socket is an for Intel internal 20PIN connector that can be connected to the TypeC output of the front I/O panel..
  • The internal 20PIN (KeyA) interface supports (Gen2-Gen1), USB3.0, USB2.0 and USB1.1 devices, no driver installation is required..
Check Stock

MEIRIYFA S-Video 4 Pin to BNC Splitter Cable,4 Pin Mini DIN S-Video Male to 2 BNC Male Y Splitter Extension Adapter Cable,for Monitors Video Signal Transmission (4Pin to BNC Male), Black

  • S-VHS Y Adaptor converting S-Video to BNC, such as insert an amplifier into the s-video output from a camera to drive coax cables, displaying S-Video from a CCTV Camera..
  • BNC to S-Video 4 Pin Mini DIN Coaxial Video Power Cable. Connector 1: 4 PIN Mini-DIN Male ( S-Video connector ) Connector B: 2* BNC Male Y splitter cable.BNC center pin (gold plated).
  • If your video signal is from a BNC plug, such as security camera, but your monitor or TV input is SVHS Video signal, or you want to convert a SVHS Video with a BNC signal, this Mini Din 4 Pin Male to Dual BNC Male cable helps you..
  • MEIRIYFA S-Video 4pin to 2BNC Y cable adapter ideal for monitors, TV's, projectors, camcorders, VCRs, DVRs/PVRs, DVD players, and Oscilloscope other video devices Video signal transmission..
  • Note: The S-terminal line is a standard 4-pin thread for 4- and 7-hole S-terminal holes. (9-hole S-terminal hole is not available).
Check Stock

DORHEA 5PCS DHT22 AM2302 Digital Temperature and Humidity Sensor, AM2302 Temp Humidity Monitor Sensor Replace SHT15 SHT11 for Raspberry Pi

  • DHT22 main chip is AM2302 high sensitive temperature humidity sensor. Single-bus digital signal output, bidirectional serial data..
  • 4 Pins Sequence Number: Pin1-VDD(Power 3.3V-5.5V).
  • Pin2-SDA, serial data interface, two-way interface.
  • The DHT22 is a reliable sensor for determining temperature and humidity. The output is serial as a digital bit sequence.The sensor is ideal to monitor the room climate or to build a weather station..
  • Each AM2302 sensor is calibrated in a very accurate humidity calibration room. The calibration coefficients are stored in OTP memory in the form of programs that the calibration coefficients are invoked within the sensor during signal processing..
  • Single-wire serial interface, the system integration becomes simple and quick. Ultra-small size, low power consumption, signal transmission distance up to 20 meters, making it the best choice for all kinds of applications and even the most demanding applications. Products are 4-pin single row pin package, easy to connect..
Check Stock

Bat System for Potter’s Wheel, 12” Round Outer Bat with Set of Six 7” Square Inner Bats, Bat Adapter with Removable Inserts for Throwing Pottery, for Potters and Clay Artists

  • EASY TO USE: Bleecker Station's Bat System is easy to use - simply lift inner bats from the insert tab in the outer bat using your fingers or a flat potter’s tool. The outer bat has holes drilled through and is also easy and to slip onto and off your pottery wheel pins. Fits standard wheel heads with pin holes spaced 10” apart on center..
  • SAVE SPACE: Save precious space in your ceramics studio by drying your pots on small square inserts instead of regular round bats, which can take up a foot of space or more on your shelves..
  • MORE ENJOYABLE: Masonite absorbs water allowing your pot to release itself as it dries, which is safer than cutting it off the wheel head with a wire and risk deforming or dropping it or leaving your fingerprints on the clay. Make throwing more enjoyable by eliminating the wiring off step altogether!.
  • SAFE: Insert tab is wide enough to prevent fingers from getting caught while throwing on the wheel..
  • DURABLE: The inserts are made out of Masonite and the outer bat is made out of a water resistant, durable exterior-grade wood material. This bat system is designed to accommodate swelling from exposure to water, so unlike other bat systems the inserts should still fit into your adapter use after use. 003cp003e MADE IN THE USA.0....
Check Stock

5 Pin DIN Y Splitter MIDI Cable Adapter, MIDI 5 Pin DIN 90 Degree Right Angle Plug Male to Dual 2 Female Extension Audio Cable for MIDI Keyboard, Electric Piano, Synthesizer, MIDI Guitar(50 cm)

  • DIN 5 Pin 90 Degree Right Angle Male to 2 Female, 1 x MIDI DIN 5 Pin Male audio singal to Dual 2 x MIDI DIN 5 Pin Female audio singal..
  • The 5 Pin DIN MIDI cable uses a 90-degree design, which can better manage the MIDI cable in some cases, especially the small corners where the cable needs to be bent. And protect the 5-pin DIN port of the MIDI device from damage caused by frequent plugging and unplugging..
  • 5 PIN MIDI cable (one male to dual female adapter) with 5 DIN Pins, sturdy and durable, high level signal transmission..
  • NO INTERFERENCE - Oxygen-Free-Copper (OFC) conductors for superior signal transfer, no delay, high quality guarantees your signal transmission..
  • This MIDI DIN Splitter Cable work for MIDI Keyboard, Synthesizer, Organ, Electric Piano, Guitar and any musical instrument device with MIDI interface female to dual male..
Check Stock

LM YN AD8302 Wideband Logarithmic Amplifier Wideband Linear Multiplier Phase Detector Module Low Frequency to 2.7G for OPA695

  • The AD8302 is a fully integrated system for measuring gain/loss and phase in numerous receive, transmit, and instrumentation applications. It requires few external components and a single supply of 2.7 V–5.5 V. The ac-coupled input signals can range from –60 dBm to 0 dBm in a 50 ohm system, from low frequencies up to 2.7 GHz. Both subsystems have an output bandwidth of 30 MHz, which may optionally be reduced by the addition of external filter capacitors. 003cbr003e.
  • The AD8302 can be used in controller mode to force the gain and phase of a signal chain toward predetermined setpoints.003cbr003e.
  • The AD8302 includes a phase detector of the multiplier type, but with precise phase balance driven by the fully limited signals appearing at the outputs of the two logarithmic amplifiers. Thus, the phase accuracy measurement is independent of signal level over a wide range. The signal inputs are single-ended, allowing them to be matched and connected directly to a directional coupler. Their input impedance is nominally 3 kΩ at low frequencies. 003cbr003e.
  • The phase and gain output voltages are simultaneously available at loadable ground referenced outputs over the standard output range of 0 V to 1.8 V. The output drivers can source or sink up to 8 mA. A load....
Check Stock

HD-MI VGA DVI Audio LVDs Controller Board 30 pin for 17' 19' 1280x1024 M170EG01 M170EN01 M170EN06 M170ETN01 1 LCD Gaming Screen Panel

  • 【LCD Driver Board】 Work for 1280×1024 30Pin 5V LVDs LCD display,video input: HDMI VGA DVI ,Audio output: speaker connector ( 8ohm 2W 4Pin PH2.0 connection),Pls use in insulated environment..
  • 【Compatible Screen models 】17″ LTM170EU LTM170EH LTM170E5 LTM170E6 HSD170ME13 M170EG01 M170EG02 M170EN01 M170EN04 M170EN05 M170EN06 LM170E03 , 19″ LM190E02 LM190E03 LM190E08 G190EG01 M190EG02 M190EN01 HSD190ME11 HSD190ME12 HSD190ME13 LTM190EX.
  • 【Plug and play】with compatible screen , Connecting the cables and ports as link pictures, Power on ,enter into HD-MI/VGA/DVI signal,the screen can be lit..
  • 【Input power supply】12V DC more than 3A ,Port size :5.5×2.1mm, pls prepare power adapter by yourself..
  • 【Board failure self-check】: Directly power on board ,The LED light green/red means board can work normally.
  • Then connect screen signal port, No enter signal ,the”no siganl” words showing on screen means the problem comes from signal ,Pls try with other signal cable /resource.
  • White/Black screen ,Check screen signal port connecting/resolution/5V jumper pin/Signal resource..
Check Stock

Halloween Cat Dog Costume Bat Wings Pet Costumes for Puppy Small Cats Kittens Cosplay Halloween Party Decoration Costume Cat Accessories S

  • ...chon, Fox Terrier, Jack Russel, Scottie.
  • 【Durable High Quality Material】 Made from strong felt material, lightweight and harmless to your pets. the fixed belt of the chest part adopts reinforcement design, which is durable and has a long service life, and dogs cannot take off it by themselves easily..
  • 【Upgraded Bat Wings Design】 The pet bat wings can easily help you decorate your small cats/dogs as a realistic black bat. Unlike the normal bat wings, the unique bat wings will make your pets look more cool & add more atmosphere for this Halloween Eve, it's a good choice for a bloody or zombie party.
  • 【Wildly Use Occasion】 These cosplay costumes are not only perfect choices to create a mysterious atmosphere at Halloween parties, but they're also great for daily life. Your pet is easy to change into different style costumes at any time, they're great gifts choice for pets festival decoration. that will be very funny.
  • 【Shop with Confidence】 We promise they all in good quality. If you encounter any problems during the use, We will help you to solve your problems as soon as possible according to your needs.
Check Stock

NantFun Pottery Wheel with Bat, 9.8'' Clay Wheel Pottery Electric Ceramic Wheel Throwing Machine for Adult Beginner, Foot Pedal, LCD Touch, with 12 Pcs Clay Sculpting Tools & Clay Cutter

  • Electric Pottery Wheel With Bat: A hard plastic bat was added to the 9.8" aluminum wheel head. The wheel head has pre-drilled bat pin holes to fit the included plastic bat. They are easy to attach to the wheel head, wide enough lip makes it removed easily.
  • LCD+Foot Pedal: For standup throwing or can be placed on a tabletop for sit-down use. Manually set speed, allow +/-. Waterproof LCD screen for touch even with clay on your hands.
  • Strong Throwing: 1/4 HP motor can center 25 lbs of clay. 9.8'' aluminum wheel head and a two part splash pan, please dry the surface for storage.
  • Steady Operation: Speed can be adjusted at 50-320r/min, smooth speed, positive and negative direction of rotation, making ceramics more faster.
Check Stock

Dericam Universal 2.4G 5dBi WiFi Antenna for Security Camera/Router, WiFi Booster, Removable Antenna, Wireless Range Expander, RP-SMA Female Connector Inside, 5dBi, White

  • Easily Removable Antenna for security camera, router or other 2.4G wireless device, extends the WiFi signal range to cover the signal dead spot. Installation direction can be adjusted easily for any angle..
  • 5dBi WiFi signal booster. replacement for typically 2dBi WiFi devices’ antenna and increase their signal strength, 2.4GHz( 2.400-2.4835GHz), 802.11 b/g/n..
  • RP-SMA female connector inside. Inner hole, no pin/needle. Match the RP-SMA jack connector, thread outside with a pin or needle..
  • Plug and Play. Fits for most of IP camera/router like Dericam/FDT/Qcam, do not work for some camera of Dahua/Foscam whose antenna is SMA connector with a pin inside..
Check Stock