Top Bathroom Product Injection Mould

Aluminum 3D Beauty Princess Girl Shape Cake Decorating Mould Baking Pan DIY Birthday Cake Mould Kitchen Supplies

  • ... NOTE:Before Using the Newly Purchased Cake Mould for the First Time, Soak It in Clean Water, Dry It with Water, Then Put A Little Grease On The Inner Wall of The Mould, and Bake It In The Oven Slowly (About 150 ℃) for About 5 ~ 10 Minutes, Which Can Ensure The Durability of The Product..
Check Stock

Aluminum 3D NO.1 Number 1 Shape Cake Decorating Mould Baking Pan DIY Birthday Cake Mould Kitchen Supplies

  • NOTE:Before Using the Newly Purchased Cake Mould for the First Time, Soak It in Clean Water, Dry It with Water, Then Put A Little Grease On The Inner Wall of The Mould, and Bake It In The Oven Slowly (About 150 ℃) for About 5 ~ 10 Minutes, Which Can Ensure The Durability of The Product..
Check Stock

APEC Water Systems SET 3 Pcs 3.5\ O.D. Replacement O-Ring For Reverse Osmosis Water Filter Housings, 3 Count (Pack of 1), Black

  • Replacement housing for Geekpure RO system,Widely used in RO system or pre-filtration.
  • Fit with most RO systems using standard 10" filters.But different brand,the injection mould is totally different,NOTE:PLEASE REPLACE HEAD AND HOUSING BODY TOGETHER.
  • INLET-OUTLET-1/4" female threaded in and out fittings.matched quick fitting ASIN:B078VQN6TZ.
  • SIMPLE INSTALLATION-Easy to replace.Food grade polypropylene will not cause pollution to water.
  • Pack of 7. 1 x Filter housing , 2 x O rings ,1 x wrench,2 x fittings,1 set screws.
Check Stock

Cake Decorator Preferred Dinosaur Shaped Birthday Party Cake Pan, 3D Aluminum Cake Decorating Mould Baking Pan Kitchen Supplies

  • NOTE:Before Using the Newly Purchased Cake Mould for the First Time, Soak It in Clean Water, Dry It with Water, Then Put A Little Grease On The Inner Wall of The Mould, and Bake It In The Oven Slowly (About 150 ℃) for About 5 ~ 10 Minutes, Which Can Ensure The Durability of The Product..
Check Stock

Geiserailie 4 Pieces Wine Glass Holder Resin Mould Serving Tray Epoxy Mould Shot Wine Rack Silicone Mould Beer Paddle Holder Moulds with Coaster Casting Moulds for DIY Handmade Agate Home Decorations

  • Product information: you will receive 1 piece wine glass serving tray mould: about 19.5 x 14.5 cm/ 7.68 x 5.71 inch, 1 piece wine rack mould, about 25 x 10.6 cm/ 9.84 x 4.17 inches, 2 pieces coaster moulds, about 13 x 10 cm/ 5.12 x 3.94 inches, 4 pieces in total, to meet your different DIY needs, and the finished product can be applied as coasters, wine glass holders, and serving trays.
  • 4 Hole shot glass resin moulds: the paddle tray resin mould contains 4 holes with a diameter of 1.38 inches to accommodate beer mugs and tea cups, which can be applied for wine glass display, wine glass fixing and wine glass trays, convenient accessories in daily life.
  • Functional usage: finished glass cup holder is suitable for serving trays, finished wine glass holder will be practical storage and display item, 2 irregular coaster silicone moulds can be applied to make coasters of various cups, ideal for bars, party, home and other places.
  • Reliable to use: our resin casting moulds are made of silicone, soft to touch and not easy to break, the surface of the mould is smooth and no polishing is required, help you to make delicate crafts, and ....
Check Stock

Silicone Planter Mold for Concrete Flower Pot Making, Square DIY Succulent Plant Cactus Planter Pot Mould, Homemade Cement Flowerpot Molding Tool (Type B - 12CM)

  • ...face, easy to demold (demould need 24-36 hours)/ clean and re-use. (Note: If to make flower pot, please use Cement or concrete)..
  • 【Square Mini Flower Pot Silicone Mould】- 1. Type A (10 CM): Mold Size about 11.2x11.2x10.5cm/ 4.4x4.4x4.13inch (LxWxH), Flower Pot Finished product size: 10x10x10cm/ 3.9x3.9x3.9inch (LxWxH).
  • 2. Type B (12 CM): Mold Size about 15.5 x15.5x12.3 cm/6.1x6.1x4.8 inch (L x W x H), Finished Product Size: About 12x12x12 cm/ 4.7x4.7x4.7 inch(L x W x H). Perfect for small green leaf plant/ succulent/ Cacti and other mini size plants. DIY Flower Pot Model, add the happy feeling in daily life..
  • 【Multi-usages Flower Pot Making Molds, DIY Silicone Planter Molds for Concrete Succulent Pots Making】- 1. This mold can be used to as cement/ concrete/ clay/ plaster/ polyester resin molding tool, to make succulent planters or containers.
  • 2. Also can be utilized to making decorative crafts such as pen holders/ candles holder/ fleshy flower pots/ jewelry holders/ brush pot and many other DIY crafts. Garden Home Decoration Craft Concrete Planter Mold..
  • 【Washable & Reusable Flowerpot Mould, Concrete Flo....
Check Stock

Orbiter Extruder V1.5 Dual Drive Direct with Motor Compatible with Ender 3 V2 Pro Ender5 Plus CR10 BLV Voron V2.4 Prusa MK3S Also Suit DDE-O TPU Printing

  • Plastic is using glass fiber reinforced nylon injection modling, Sturdy shell and mould manufacturing..
  • PLEASE NOTE: The motor may come with LDO or Moons Big factory, both motors have very high quality, not effects on the use of extruder, please know....
Check Stock

LOVEINUSA Ice Cream Mold Set, Square Cakesicle Mold Small Popsicle Molds 50 Wooden Sticks for DIY Ice Cream Cake Mousse Dessert

  • PACKAGE INCLUDED - 1 x Square Chocolate-like Popsicle Mould, 1 x Classic Popsicle Mould, 50 x Wooden Stick, each mould has 4 cavities, suitable for both kids and adults..
  • SIZE - Chocolate-like Mould: 10.25 x 5.75inches, Classic Mould: 8.4 x 4.8inches, Popsicle Stick: 4.5inches (L), Cavity of Chocolate-like Mould: 1.9 x 3.1inches, Cavity of Classic Mould: 1.5 x 2.75inches.
  • PREMIUM QUALITY - Our Ice Pop Molds are all made of food-grade silicone, eco-friendly and BPA free, can stand with the temperature ranging from -40-230 degrees Celsius. Can be put in the fridge and oven. Washable and dishwasher safe..
  • PERFECT DESIGN - Our popsicle molds are compact and easy to store. Stackable in the fridge, room-saving and easy to clean up, labor-saving. Easy to pop the popsicle out when frozen. Lightweight and reusable, designed for long-term use..
  • VARIOUS APPLICATIONS - Our popsicle mould is not only perfect for all kinds of ice creams making but also for freezing fruit, cakesicle, mousse and other desserts making. Suitable for both refrigerator and oven..
Check Stock

4 Pack Tray Silicone Molds

  • What you will receive: the package comes with 5 pieces of round coaster resin moulds, 5 pieces of square coaster resin moulds, 2 pieces of silicone coaster storage box mould in rectangle and round, sufficient quantities and proper combinations will satisfy your various DIY needs in daily life.
  • Quality material: these epoxy casting moulds are made of silicone material, they are lightweight, reliable and reusable, they can withstand temperature from minus 40 to 446 degrees Fahrenheit, you can use them for a long time, and they are non-toxic, safe and tasteless, easy to clean with warm soapy water.
  • Simple to use: our round and square resin moulds set has smooth interior, so they are easy to demould, you just need to put the required filler into the mould, wait a while until the resin is completely cured, and gently twist the mould to push it out without tearing easily, while maintaining the shape of the mould.
  • Size of products: the diameter of round craft resin coaster mould is approx. 9 cm/ 3.54 inches, the size of the square coaster silicone mould is approx. 9 x 9 cm/ 3.54 x 3.54 inches, the round coaster holder silicone mould measures about 4 x 10.5 cm/ 1.57 x 4.13 inches, and the size of rectangle coaster storage box silicone mould is approx. 4 x 7 x 1....
Check Stock

2 Pieces Graphite Ingot Mould Crucible Mould for Casting Gold Silver Metal Aluminum Copper Brass Melting Refining (4 x 2 x 1 Inch)

  • ..., nice acid and alkali resistance, nice corrosion resistance, impact resistance, 89 MPA compression resistance, and 48.7 MPa flex resistance.
  • Widely applicable: the mould can be applied for experiments and smelting of non-ferrous metals, such as gold, silver, copper, aluminum, and so on.
  • Considering the size of this product, it is more suitable for small-capacity metal melting.
  • Ingot mould size: 1KG graphite ingot mould outer is 100 x 50 x 25 mm/ 4 x 2 x 1 inch, inner is 90 x 40 x 20 mm/ 3.54 x 1.6 x 0.8 inch.
  • 2KG graphite ingot mould outer is 100 x 60 x 40 mm/ 3.93 x 2.36 x 1.57 inch, inner is 85 x 45 x 30 mm/ 3.35 x 1.77 x 1.18 inch, melting and casting metals like gold, silver, brass, aluminum, copper, zinc, plumbum, and more.
  • The capacity is an approximate volume is 1 kg hold or 500g silver.
  • What you receive: there are 2 pieces of graphite ingot moulds in this package include 2 different size, enough quantity for you to use, improving your work efficiency in daily life.
Check Stock

Kibbeh Maker Meatball Mold Manual Meatloaf Maker Press Tool Meatball Mould Kibbeh Maker Mold 4 Grids icli kofte kalibi Meatball Size 3.15×1.77inch

  • Making stuffed meatballs is much easier now. It is simple to use, anyone can use it very easily. 4 meatballs can be made at the same time. You only....
  • Save your time. Kibbeh maker is simple to use, just put a plastic bag on it, then fill and press it. No sticky fingers and no rolling the meat in your....
  • It is made of hard Composite Polymer material. The product consists of 3 parts. Lower mould, upper mould and pressing mould. Kibbeh maker mold is....
  • Does not contain any substances that are hazardous to health. 100% BPA Free..
  • Easy to clean. The simple design makes it easy to clean. It can be washed with soap and warm water and dishwasher safe..
Check Stock

Comfy Hour Rustic Style Collection Cast Iron Butterfly Flower Garden Plant Trolley Flowerpot Holder

  • Material: Durable cast iron treated with special coating to protect from rust and wear.
  • Product Dimension: 11 inches (Length) x 11 inches (Width) x 2 inches (Height).
  • Fixed With Heavy Duty Super Strong Industrial Strength Iron Wheels - easy to use - keep your big flowerpot in balance and move it with ease.
  • New design decor given rusty looking upgrading your home with charm.
  • This product is completely controlled and made by hand and quality is strictly checked through every production process from beginning to finishing. making wooden mould then aluminium production mould, pouring cast iron, polishing surface, painting, wheel assembling, and finally quality inspection before packing into box.
  • SHOP WITH CONFIDENCE. FAST SHIPMENT AND QUALITY GUARANTEED- Your satisfaction is our #1 priority.
Check Stock