Top Battery Holder Connector

Onwon 6 Pieces 2 Slots x 1.5V AA Battery Case Holder Battery Spring Clip Storage Box Wire Leads with On/Off Switch

  • Multipurpose Battery Case Holder: You can use this case with your own battery to form power system supply.
  • High quality ABS plastic case, brass rivet connector, 6-inch black red wire leads(coarse wire), durable repeated use,lightweight,convenient to carry.
  • Easy install, with ON/OFF switch convenient to use, enclosed Holders come with screw to secure,with spring clip design, you can easily to put the battery in it.
  • Perfect external power source for electronic DIY, the battery holder is for circuit boards, electric toys, digital photo frames, electronic calendar and other digital products,and more,add them in series if you need more voltage.
  • Pay Attention: Do not touch the red black line when you series output 3V is installed on the battery. The screw can be fixed(Screw not attached).
Check Stock

E-outstanding Battery Holder 2PCS 9V Battery Boxes Case with ON/Off Switch and 5.5 x 2.1mm DC Plug Lead Wire for Arduino

  • Connector type: 2.1x5.5mm DC male connector. Lead length: 15 cm/5.9 inches. Package includes: 2PCS..
  • Adopt spring clamp design, easy to install and remove the battery..
  • Battery holder with ON/OFF switch and cover..
  • Very suitable for electronic applications and small hobby projects..
Check Stock

Mxzzand 3in Industrial Robot Parts Accessories Omnidirectional Wheel Metal 2Pcs for Industry Production with 10pcs Driven Roller

  • Among the many items in this kit are: Linkbot-I robot, 1 Linkbot Wireless Dongle, 3 Snap Connectors, 2 3.5" Wheels, 2 4" Wheels,1 Ball Caster, 1 Push Scoop, 1 Hacky Sack, 1 36" USB Cable, 1 7" USB Cable, 1 8"x10" Resealable Bag, 1 Year Linkbot Warranty.
  • 1 Sketch Pack, 12 Snap Connectors, 1 Gripper Pair, 2 Bridge Connectors, 3 Cube Connectors, 1 L Connector, 1 U Connector. 2 Snap Connector Caps, 2 3" Rectangle Connectors, 2 4" Rectangle Connectors, 2 5" Rectangle Connectors, 2 T Connectors, 8 Colored Foam Cubes, various screws and nuts.
  • 2 Arduino-Uno-Compatible Boards, 1 USB A-B Cable, 1 Joystick, 1 RGB LED, 1 Ultrasonic Distance Sensor, 8 Red LEDs, 8 Green LEDs, 8 Blue LEDs, 8 Yellow LEDs, 2 7-Color LEDs, 2 GRB LEDs, 12 220 Ohm Resistors, 12 10k Ohm Resistors, 1 LDR VT90N2 Photoresistor, jumper wires, 3 10k Potentiometers, 1 Fullsize Breadboard, 6 Push Buttons.
  • 1 9V Battery Holder, 1 Mini Breadboard, 1 Linkbot-Arduino Cable, 1 2-in-1 Dual Phillips/Slotted Screwdriver, 3 Snap Connectors, 1 Cube Connector, 1 L Connector, 3 Mounting Plates, 2 Sensor Bracket, 1 Li-ion Rechargeable Battery,.
  • 1 Color Sensor, 2 Short Distance IR Distance Sensors,1 RGB LED Module with Common Positive Lead (Common Anode), 2 RGB LED Module with Common Negative Lead (Common Cathode....
Check Stock

Battery Case Holder with Lead Wire Bundle,6PCS 9 V Battery Clip Connector T-Type 9 Volt Battery Clip with 2.1 x 5.5 mm Male DC Power Plug for 9V Battery Connector for Arduino DIY

  • Pure Copper Cord: 24awg UL Pigtail Cables(black),Holder Type: T-type Terminal with Leather Shell,Super Tight Snap Head..
  • 9V battery clip connector T-type with 2.1 x 5.5 mm male dc power plug for arduino diy..
  • The 9v battery clip connector is made of solid plastic and metal, which is not easy to break and has good contact performance, without risk of electric leakage..
  • Each 2.4 x 1.2 x 0.7cm, 9V battery clip connectors with 2.1 x 5.5 mm male dc power plug (not including 9 V batteries)..
  • This 9 volt battery clip t-type with 2.1 x 5.5 mm male dc power plug is widely used in student experiment, LED strip lights, or arduino or other devices with a 9V battery..
Check Stock

Swpeet 10Pcs Series or Parallel D Battery Holder Kit, Perfect for Physics Laboratory, School Electronic Experimenting, Great for Demos Teaching Basic Principles of Electricity

  • ...w Type Easy for students to use】 ------ This is great for home school making and breaking a single electrical connection circuit experiments. good for teaching basic principles of electricity & how a simple circuit works. screw type binding post, If you use alligator clips you might want to temporarily remove the connector knobs..
  • ☛ 3, 【 Parallel or Series Connections Wide Applications】 ------ These are great for demos and project. Easy to use and great learning tool for kids. I think practicing on an education model would definitely benefit any student. These durable individual plastic d-cell battery holders can be quickly and easily snapped together to form either parallel or series connections. They can be used individually or configured in parallel..
  • ☛ 4, 【 D Battery Holder Good Choice 】------- The Battery Holder is sturdy and well made. It works well in the hand of students. Battery Holde provides stability in handling and visualization of electrical principles, screw type binding post ,screw down connection terminals are heavy duty,for secure electrical connection..
  • ☛ 5, 【 Warm Note】 ------ Of course that while this does teach them how electricity works, you have to make sure to teach them not to play with actual electrical equ....
Check Stock

4 x 1.5V 6V AA Battery Holder 9V I Type Snap Connector Plastic Housing （3+3） Pcs

  • Battery Holder Size :6 x 6.3 x 1.6cm/2.36" x2.48" x0.63 "(L*W*H).
  • Snap Connector Size and Wire Lengh:0.94" x 0.51" x 0.39"and 5.5".
Check Stock

LAMPVPATH (Pack of 5) I-Type 9V Battery Connector, 9 Volt Battery Clip, 9V Battery Clip Connector with Wire and Hard Buckle Plastic Housing

  • Package: Includes 5 pcs I TYPE 9v battery connector.
  • All these 9 volt battery connectors are with bare leads, all these 9 volt battery clip are with hard buckle plastic housing, no 9V battery is included in the package..
  • Good Material of 9v battery clip: Very Hard Plastic ABS and Metal to make the sturdy house for 9v battery snap connector.(Means these 9v battery clip connector is designed not easy to pull apart when removing from the battery, they have longer life than other 9v snap connector that are just fixed on soft material).
  • Size of 9 volt battery clips with wires( Each ): 2.4 x 1.2 x 0.7cm/0.94" x 0.47" x 0.28" with wire length approx. 15 cm/ 5.9 inches.
  • Connection wires color of 9v connector: black and red..
  • Function: These 9 volt battery connectors with clips are easy replace a broken battery connector on your electronic device, making removable power connections in home projects, they should be part of any experimenter or maker's kit..
  • Attention: All these 9 volt battery clip connector are only suitable for 9v battery and 9v battery holders, please make sure this when buying this item, please do not apply them when your hands are wet..
Check Stock

Vilros Getting Started with MicroPython on Raspberry Pi Pico Kit

  • Vilros Getting Started With MicroPython on Raspberry Pi Pico Kit.
  • LEARN TO PROGRAM: 48 Page Full Color Guide features clear instructions with screenshots and covers: Getting to know your Pico, Programming with MicroPython, Physical computing, More Pico projects--Also Includes a Pin Reference Card for easy Pico Wiring.
  • CUSTOM PICO PARTS: Includes Battery Holder with Micro USB connector to power on the go, USB Cable to connect to a PC and program and a Panel to neatly hold the breadboard and battery holder for a neat and easy wiring experience.
  • STORE AND CARRY: Includes a Picoboat case to protect your pico when not in use and also includes a neoprene bag to store all the parts of the kit neatly.
  • HIGH QUALITY COMPONENTS: Includes 30 × Jumper wire variety --1 × Full Size (800 Hole) Solderless breadboard--12 × Assorted Color LEDs: ---5 × Push-button switches--10 × 330 Ω resistors--1 × Active piezoelectric buzzer--2 × 10 kΩ potentiometer--1 × HC-SR501 PIR sensor--1 × I2C 1602 LCD module--1 × WS2812B LED strip-- All Packed in a Clear hard plastic box for small part storage.
Check Stock

11.1V 5200mAh 6 Cell Lithium ion 18650 57.72Wh Rechange Battery Pack with 2 Pin MTA-100 Connectors

  • Lithium Ion 11.1V 5200mAh 57.72Wh 18650 6 Cell Battery Pack.
  • High Density Rechargeable Battery Pack - Heavy Weight Battery Pack - Not a Light Weight Cheap Battery Pack..
  • US Stock/Supply , US Company, US Shipping and Tech Support, Get Assistance nearly 24/7 via phone or text.
  • Heavy Duty 18 Gauge Wire. Comes Pre-tipped with a 2 Pin Female Connector and Includes a Loose 2 Pin Male Connector for you to Install on Your Device to Match the Battery Pack Connector. You Can Also Remove the Connector from the Battery Pack to fit your own Connector or make a Charger..
  • This Light Weight and High Energy Density Battery Pack has a Higher Capacity than most other Rechargeable Battery Packs. An Installed IC Chip Pevents the Battery Pack from Over Charge and Over Discharge. It Helps Protect the Battery Chemistry Integrity and Prolongs Battery Life. Perfect for Projects and Devices that Requires a 11V-12V Battery Pack for Power..
Check Stock

11.1V 2600mAh 3 Cell Lithium ion 18650 28.86Wh Rechange Battery Pack with 2 Pin MTA-100 Connectors

  • Lithium Ion 11.1V 2600mAh 28.86Wh 18650 3 Cell Battery Pack.
  • High Density Rechargeable Battery Pack – Heavy Weight Battery Pack – Not a Light Weight Cheap Battery Pack..
  • US Stock/Supply , US Company, US Shipping and Tech Support, Get Assistance nearly 24/7 via phone or text.
  • Heavy Duty 18 Gauge Wire. Comes Pre-tipped with a 2 Pin Female Connector and Includes a Loose 2 Pin Male Connector for you to Install on Your Device to Match the Battery Pack Connector. You Can Also Remove the Connector from the Battery Pack to fit your own Connector or make a Charger..
  • This Light Weight and High Energy Density Battery Pack has a Higher Capacity than most other Rechargeable Battery Packs. An Installed IC Chip Pevents the Battery Pack from Over Charge and Over Discharge. It Helps Protect the Battery Chemistry Integrity and Prolongs Battery Life. Perfect for Projects and Devices that Requires a 11V-12V Battery Pack for Power..
Check Stock

AEDIKO 50pcs CR2032 Vertical Button Cell Battery Sockets 3 Pin Holder Case Plastic Shell Type Black

  • 50pcs CR2032 Coin Button Cell Holder,Fits CR2032 Button Cell (Battery is NOT Included).
  • Body Size: 23 x 18 x 5mm / 0.9" x 0.7" x 0.2"(L*W*H).
  • Two Negative Leads, and One Positive Lead,Easy to Connect to the Pin Connector.
  • Vertically Mounted,Easy to Insert or Remove, Holding the Battery in Place Firmly.
  • Ideal Accessories for DIY Project or Other Electric PCB Board.
Check Stock

ZRM&E 6V Power Box 4xAA Battery Holder Case with DC 5.5x2.1 Connector Mate with Barrel Jack Connector on Arduino

  • Package includes: 1 x 4xAA Battery Holder Case.
  • The connector is paired with the barrel jack on Arduino to supply power to your device, power supply to LED lamp power supply, etc., and you can also go to DIY for more play.
  • 5 inch cable termination standard 5.5x2.1mm center positive barrel jack connector.
Check Stock