Top Battery Terminal Tool Kit

Vignee Terminal Removal Tool Kit,80Pcs pin Terminal Extractor Kit for Car,Wire Connector Pin Release Key Extractor Tools Set for Most Connector Terminal with a Protective Bag

  • 【With protective bag】This pin terminal removal tool kit set of tools is sharp, so we provide a protective case for you. You can keep your tools in it to make it more portable and prevent children from playing with them..
  • 【Package】: There are 80 pieces of key pins to cater for majority of the car plug terminals.Offers single, double pin extractors and casting tool of different sizes to fit any terminal..
  • 【High Quality】The pin terminal extractor is made of high-quality stainless steel and plastic with high hardness. It is not easy to deform and can be used repeatedly for a long time. The pin headers are available in different specifications and are suitable for most electronic equipment maintenance, making your work more convenient..
  • 【Easy to use】The terminal extractor tool allows terminals to be easily removed from the harness connector without causing any damage to the line,The terminal pin back set is the most convenient line inspection and removal kit. Note:Most of the wire harnesses are held in place with barb clips. You can use a tool to lift or flatten the barbs, and then gently pull out the wire ends. Pay special attention to strength and direction, use agility rather than brute force. Do not pull or pry hard..
Check Stock

150pcs Battery Cable Ends, Copper Wire Lugs Assortment Kit AWG 2 4 6 8 10 Gauge - 70Pcs Battery Cable Lugs Ring Wire Terminal Connectors and 80Pcs Heat Shrink Tubing Kit for Marine Electrical Supplies

  • ...resistant purple copper to ensure the reliability of the connection. Surface pickling mitigates oxidation. Standard lugs opening facilitates wire insertion. The inspection window is designed to check the correct and complete cable insertion. Each wire lugs has a specification mark, so you can quickly find the right terminal. Copper wire lugs can be easily and safely crimped or soldered to the cable..
  • [EASY INSTALL] Battery lugs are used in conjunction with heat shrink for power draw or grounding, making wiring safe, reliable and work professionally. Flame retardant and insulated heat shrink is made of polyolefin, which is pre-cutting into common sizes for selection to improve working efficiency. Crimp or solder cable into copper wire lugs, insert heat shrink, apply to heat. It will shrink quickly and wrap cable well. Red and black color make us quickly identify positive and negative cables..
  • [COPPER LUGS KIT] For electrical, various sizes of wire lugs are needed to carry sufficient amperage between components. 150pcs wire connectors kit has a assortment of terminals for you to freely choose, Including 10 types of 70PCS of AWG 2 4 6 8 10 copper wire lugs, 3 size....
Check Stock

MWBFPAFC 109 PCS Terminal Removal Tool Kit Terminal Ejector Kit Auto Electrical Wiring Crimp Connector Pin Repair Remover Key Tools Set for Most Car Connector Terminal

  • Wide Application -The electrical pin removal tool kit includes 109Pcs different types car plug terminal extraction repair tools, can be widely used for most of the connector terminal removal, picker harness terminals and connector crimp pin removal (such as cars ,wiring harness and household appliances).
  • Easy to Use - No need to pry open the terminals, just push and pull the terminal pins. The automotive terminal removal tools can effortlessly removing terminal wires from the wire harness connector and add a new wire, so you can maintain the factory original harness and plug in your own electronic device without any damage.
  • Convenient - This set of electric pin remover tool is light weight and compact shape, coming with 3 pieces of stainless steel beaded ball chain, easy to use and carry.
  • High Quality - The depinning tools are made of premium quality steel and plastic, strong and durable, would not easily get out of shape, can be used repeatedly. The O ring handle make it more safe to operate the terminal pins connectors.
  • Warm Tips: Please be really careful when you are using the terminal ejector kit in avoidance of pricks or other injuries,Youd better keep it somewhere kids cant reach.
Check Stock

Maerd Terminal Removal Tool Kit, 76Pcs Terminal Ejector Kit for Car, Pin Extractor Tool Set Release Electrical Wire Connector Puller Repair Key Removal Tools

  • 【Portable Safety Protective Bag】This set of tools is sharp and can be placed in a protective box for easy carry and prevent children play as toys.
  • 【Package Include】 76Pcs pin removal tool kit includes 28Pcs Single Pin Extractor, 30Pcs Double Pin Extractor, 18Pcs Casing Tool.
  • 【High Quality】The terminal extractor tool is made of premium quality stainless steel and plastic, not easily get out of shape, can be long term use. The pin removal tool has different sizes fit any terminal.
  • 【Easy to Use】 The electric pin remover tool is easy to use, just push and pull the terminal pins with connector removal tool for removal effortlessly from the wire harness connectors without any damage.The O ring handle make it more safe to operate the terminal pins connectors.
  • 【Wide Application 】This set of electric pin remover tool is light weight and compact shape, Split into multiple portable sets, which can be used in different places, The wire extraction tool is perfect for cars, motorcycles, household appliances and other electronic devices.
Check Stock

Universal Negative & Positive Battery Cable Terminals - Automotive Terminal Clamps Connectors - Durable & Adjustable Quick Release Terminal Assortment Kit for Cars & Trucks - Car & Truck Accessories

  • HIGH QUALITY - Our battery terminal clamp connectors are brand new & made with premium quality aluminum. Production Years: 2020-2021. Universal negative & positive battery connector fits cars, trucks, boats & vans, & possess long durability..
  • GOOD PERFORMANCE - Battery terminal has good conductive performance & quick release. Corrosion-resistant aluminum terminals can reduce voltage distortion & transmission loss. Convenient wiring & firm connection. Best choice for your vehicle!.
  • KIT INCLUDES - 1 pair of negative (black) and positive (red) battery cable terminal clamps connectors, sufficient for daily use & replacement. A must-have for drivers: the battery terminal between car's battery & car's ignition system is crucial.
  • IMPORTANT NOTICE - Before installation, please make sure that the battery is in a de-energized state. If the original terminal has deteriorated, please replace it with a new terminal immediately..
  • BEST EXPERIENCE - We are committed to providing customers with premium-quality automotive accessories to suit all their needs. This is why we always use non-toxic materials of the highest quality & produce all goods according to GMP standards..
Check Stock

Remote Battery Jump Post Battery Charging Jumper Terminals Relocation Kit Compatible with UTV ATV Car Trucks RV Tractor Boat Can-Am X3 Accessories

  • 【HIGH QUALITY】With high quality copper wire is 3.95ft long has good electrical conductivity, thermal conductivity and corrosion resistance to ensure it can work for a long time.
  • 【REMOTE BATTERY TERMINAL】Each battery terminal kit is assembled using the top-quality brass terminal to transmit the maximum power. Equipped with insulation cap easy to identity and prevent crossed cables, waterproof and dust-proof, can prolong the service life.
  • 【ACCESSORIES】Our battery relocation kit feature thick PVC plastic that are more strong and lightweight, pre-drilled hole to prevent the possibility of arching against important vehicle hardware.
  • 【EASY INSTALLATION】Our X3 battery jump post kit designs small and compact and easy to install in any places where the jumper is convenient for the vehicle. It will allows you to easily charge your battery or even jump start your vehicle without removing the annoying rear seat.
  • 【APPLICATION】Compatible with Can Am X3 models 2 or 4 seats all models, all Polaris RZR models 2 or 4 Seats, all UTV/ ATV models, trucks, race car, travel trail....
Check Stock

UTV Remote Battery Jump Post, Battery Terminals Relocation Kit Water Resistant High Voltage Cables compatible Fits for Can Am X3 Models 2 or 4 Seats All Models, for Truck Car Trailer Boat Rv

  • [Must-Have]: This fits for UTV Battery Terminal Relocation Kit moves a set to a more accessible area under the hood.
  • connects directly to your starting battery, and attaches elsewhere in the vehicle jumper for easy access to the battery terminals and charge the battery quickly and easily!.
  • [Wide Applications]:Charging Jumper Compatible fits for Can Am X3 Model 2 or 4 Seat All Models, Compatible with All fits for Polaris RZR Models 2 or 4 Seat, Compatible with Fits for All UTV/ATV Models.
  • Can Also Fit in Trucks, Race Cars, Travel Trailers, Most vehicles such as RVs, tractors, lawn mowers, diesel engines, boats, etc..
  • [Superior Quality]: fits for UTV battery post kit is made of high quality 4 gauge copper wire, copper core bushing and large brass nut, which can provide maximum power, good conductivity and stability.
  • strong and lightweight iron mounting plate, Pre-drilled to prevent the possibility of arching to critical vehicle hardware. Metal protective add-on cover to reduce damage and increase durability for long life..
  • [Waterproof Cable]: The wiring harness in the battery terminal relocation kit is waterproof with IP....
Check Stock

GreatNeck 25287 Side Terminal Battery Wrench 5/16” | Easily Change Your Car Battery | Vinyl-Coated Terminal Wrench Protects from Shock & Arcing | Reverse Toggle So You Can Use in Either Direction

  • EASY CAR BATTERY REPLACeMENT: Replacing a car battery has never been easier than with our battery wrench.
  • SHOCK RESISTANT: Our battery terminal wrench is vinyl-coated. This protects the side terminal battery wrench from shock and arcing.
  • QUALITY MATERIALS: Our side terminal battery wrench is essential in your car battery repair kit, and it’s important your tools are made of the highest-quality that you can trust. This OEMTOOLS battery ratchet wrench is crafted from durable steel.
  • NUMEROUS FITS: Each driver has a standard 1/4" hex compatible with standard impact drivers, drills, and driver handles.
  • FLEXIBLE: The battery ratchet has a reverse toggle so you can use it in either direction while replacing your car terminal battery.
Check Stock

VGEBY Wiper Puller, Windshield Wiper Removal Tool Heavy-Duty Battery Terminal and Wiper Arm Puller

  • TOP QUALITY: After professional technical testing and improvement, Windshield Wiper Removal Tool can give you the best choice..
  • PROFESSIONAL: Remove battery terminal clamp without damage to battery post..
  • CONVENIENT: Removes stuck battery terminals,tighten knurled cone to force jaws under the cable clamp,turn center screw to lift clamp off terminal.
  • MULTIFUNCTION: Windshield Wiper Removal Tool is also can be used to remove bolted-on windshield wiper arms that fit over a tapered spline..
  • GUARANTEE: If you have any problem with this product, you can take advantage of our 180 days warranty. We will change or refund for any reason..
Check Stock

WARN 22680 Quick Connect Winch Power Cable Connector Plugs, 1 Pair

  • {INSULATED FLAME-RETARDANT SHELL}: The shell of the battery quick connect/disconnect is made of high-quality PC flame-retardant material, with a fire rating of UL94 v-0, safe, wear-resistant, and compression-resistant, ensuring stability in use in complex and harsh environments.
  • {SILVER COPPER PLATED TERMINAL}: The thicker copper-plated silver of the battery quick connect disconnect set greatly enhances the electrical conductivity, which helps prevent ignition when large current passes, and ensures stable current transmission.
  • the copper terminal of battery quick disconnect kit is convenient for cold pressing, welding, and faster and firmer wiring.
  • {SPECIFICATIONS AND PACKAGING of the BATTERY QUICK CONNECTOR SET } Voltage: 12-36 volts DC.
  • the package contains 6 groups of 6 to 10 battery quick connectors, including 6 connectors, 12 terminal pins, 6 caps, the quantity is enough to meet your different Demand or replacement.
  • {EASY TO INSTALL}: You can quickly install the plugs of these battery quick disconnect connectors, insert the wires into the terminal pins, and then perform welding or crimping. The ends of the connectors are the same, so both ends are suitable for connecting to the power or load side.
Check Stock

Zhushan Battery Cable Lug Crimping Tool Kit, Electrical Lug Crimper 10-1/0 AWG with 60Pcs Copper Ring Terminals Set for Heavy Duty Wire Crimper for Battery Terminal

  • 【Crimp Tool Kit Includes】1 x Battery Cable Lug Crimping Tool and 60 x Copper Ring Terminal Connectors.
  • 【6 Swivel Crimping Dies】Battery cable crimpers feature10 ,8, 6, 4, 2, 1/0 AWG (6mm²/10mm²/16mm²/25mm²/35mm²/50mm²) dies that use spring loaded locking pin swivel heads to resize.
  • 【Easy Operation】The non-slip rubber coated handle of this crimping tool is more comfortable and convenient to use. Just press down on the screw, rotate the crimp to the size you need, and simply crimp the cable lug to complete the crimp.
  • 【Ergonomic Design】Ergonomic, cushioned, non-slip handle, the tool handle of the crimping pliers is wrapped with soft rubber, and the lever structure design can increase the friction force, making the work more comfortable and labor-saving.
  • 【Application】Widely used in copper, aluminum cable lugs and non-solder and standard electrical connections.
Check Stock

IWISS Deutsch Connector Crimping Tool Kit for Deutsch DT Connectors, Solid & Stamped Contacts, Delphi Weather Pack Crimper,Deutsch Pin Removal Tool Kit-12PCS

  • Automotive Harness Wiring Tool Kit: Ideal for pin & depin automotive electrical connectors like Weather Pack connectors, Deutsch Connectors, Molex connectors which are commonly found on cars, RVs, trucks, motorcycles, race cars and boats..
  • Deutsch Crimping Tools: IWD-16, IWD-12 & IWD-20 crimpers are designed for crimping Deutsch solid pins and sockets(Size 16, Size 12 & Size 20) to fit in Deutsch DT, DTP, DTM, HD10, Jiffy Splice connectors..
  • Weather Pack Crimping Tool: Delphi WeatherPack Crimper: IWC-1424B Metri-Pack and Weather Pack crimp tool aids in the assembly process of the Metri-Pack 150 & 280 and Weather Pack connector lines. The crimpers are designed to crimp the terminals and seals found in the Metri-Pack and Weather Pack series..
  • Open Barrel Terminal Crimper： IWC-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal..
  • Pin Removal Tools: ET-01( DT-RT1) Deutsch wedgelock removal tool and depin tools for WeatherPack terminals, Deutsch DT, DTM, DTP connectors release terminals safely without damaging the vehicle wiring harness or terminal block..
Check Stock