Top Bead Tubes And Vials
Motion Pro 08-0471 Bead Buddy II
- Improves on the original Bead Buddy with durable 6061 aluminum construction, a blue anodized finish and a laser engraved logo.
- Used to push the tire bead down into the drop center of the rim on off-road wheels while using tire tools to change tires.
- Hooks over spoke and pushes bead down on opposite side of tire from tire irons.
Check Stock2 Pack - Tube & Rim Strips 27 x 1-1/4 32mm Schrader Valve Sunlite
- 2 Tubes: 27" x 1-1/4", Schrader Valve, 32mm.
- 2 Rim Strips: Rubber 27" x 1-1/4" x 12mm wide.
- 2 Tubes and 2 Rim Strips, each in their own box..
- Be sure the tire bead is seated evenly all around the rim by first adding a little air to the tire, checking the bead on both sides and if beaded properly continue filling air to the correct pressure as stated on the tire..
- For the health of your tire and tube always maintain the proper air pressure. See the side of your tire for minimum and maximum pressures..
Check StockNeutec Tubliss The Tubeliss-Core - 21in. Kit TU21
- It's not about going tubeless for the sake of eliminating tubes..
- It's all about the countless benefits of going TUbliss® that makes every rider and racer better, faster, and more in control..
- TUbliss® is, essentially, a high pressure rim lock and seal that secures the entire tire bead to the rim, completely eliminating the use of a conventional tube..
- TUbliss® allows you to run a low tire pressure (as low as 10 PSI) which dramatically improves traction.
- especially important for Enduro and Baja racing..
- Since there's no conventional tube, the days of pinched tubes and flats are over! Even if you get a tire puncture, the bead stays seated to the rim..
Check StockAuniwaig 1000 Pieces Centrifuge Tube 0.1ml Conical Centrifuge Tubes with Leak-Proof Cap, Micro Test Tubes Clear Conical Microtube Plastic Centrifuge Tube, Transparent Test Sample Tubes for Lab
- Capacity:The capacity fo centrifuge is 0.1ml.
- These conical centrifuge tube is super clear and light weight plastic vials tubes..
- Suitable for samples,test,craft use,etc..
- High Quality: These 0.1ml centrifuge tubes are made of high purity PP material. They are designed to have leak-proof caps with sealing rings to prevent leakage..
- Wide Application: Our plastic centrifuge tubes are general used in fields of biochemistry and molecular biology,such as separation and preparation of various biological samples..
Check StockHeathrow Scientific True North HEA120073 Polycarbonate Mini Cooler with Clear Lid, Holds 0.5-2 mL x 12 Tubes, -20°C Maximum Temperature
- Polycarbonate construction with rubber non-slip feet.
- Gridded and keyed one-position lids for easy sample identification.
- 0.5 mL tube adapters supplied as standard with the 0.5-2.0 mL tube size versions.
- Temperature-retention graph supplied with each of the 7 styles available.
- Versions available for 0.5 and 1.5/2.0 mL microcentrifuge tubes and cryogenic vials and a 96-place version for 0.2 mL tubes and assay plates.
Check StockHeathrow Scientific True North HEA120074 Polycarbonate Mini Cooler with Clear Lid, Holds 0.5-2 mL x 32 Tubes, -20°C Maximum Temperature
- Polycarbonate construction with rubber non-slip feet.
- Gridded and keyed one-position lids for easy sample identification.
- 0.5 mL tube adapters supplied as standard with the 0.5-2.0 mL tube size versions.
- Temperature-retention graph supplied with each of the 7 styles available.
- Versions available for 0.5 and 1.5/2.0 mL microcentrifuge tubes and cryogenic vials and a 96-place version for 0.2 mL tubes and assay plates.
Check StockHeathrow Scientific True North HEA120072 Polycarbonate Mini Cooler with Gel Filled Lid, Holds 0.5-2 mL x 32 Tubes, 0°C Maximum Temperature
- Polycarbonate construction with rubber non-slip feet.
- Gridded and keyed one-position lids for easy sample identification.
- 0.5 mL tube adapters supplied as standard with the 0.5-2.0 mL tube size versions.
- Temperature-retention graph supplied with each of the 7 styles available.
- Versions available for 0.5 and 1.5/2.0 mL microcentrifuge tubes and cryogenic vials and a 96-place version for 0.2 mL tubes and assay plates.
Check Stock2 Pack - Tube, 16 x 1.50-1.95 32mm Reg Schrader Valve, Sunlite, Stroller, Youth Bike, Toddler Bike, Trailer.
- Stroller, Trailer, Jogger, Kids Bike, Youth, Recumbent bike or any tire with the same dimensions..
- Be sure the tire bead is seated evenly all around the rim by first adding a little air to the tire, checking the bead on both sides and if beaded properly continue filling air to the correct pressure as stated on the tire. For the health of your tire and tube always maintain the proper air pressure. See the side of your tire for minimum and maximum pressures..
Check StockThe Beadsmith Wooden Bead Loom, 11” x 7” x 3”, Includes Assembly Instructions, Use to Create Bracelets, Necklaces, Belts, and More
- METAL BEAD LOOM & QUALITY COMPONENTS: 1 x metal bead loom, 20 x slide clasp tubes, 1 x roll plastic crystal wire, 2 x beading needles, 2 x bead tray, 1 x bead pad, 1 x instructions and 1 pack of mixed color beads.
- GREAT SIZE & DESIGN: Bead loom measures 11.6 x 2.7 x 3.5 inches, right size for an entry-level project, stable in structure, can control the tension, wire won't slip.
- 2 LARGE EYE BEADING NEEDLES: Eye opening can be adjusted, fit different sizes thread. Needle is very slim, can fit small glass seed bead. Good ductility, can be bent without breaking when stringing.
- SLIDER CLASP TUBE EASY TO FINISH THE BRAIDING: Add a clasp to your beading creations, simply end to your beading projects. Slider clasp durable and sturdy, lead and nickel free.
- COME WITH INSTRUCTIONS, GREAT FOR BEGINNERS: Make it easier for you to can make bracelets, necklaces, earrings, friendship, bracelets, rings, belts, headbands, key chains and more. More weaving patterns and techniques can be found on YouTube.
Check StockPolar Whale Personal Travel Test Tube Holder Rack Black Foam Lab Storage Organizer Compact Stand Transport Holds 8 Tubes Fits up to 11mm 13mm 15mm 17mm Diameter
- Designed to fit tubes from 11mm to 17mm in diameter.
- 8 tube capacity (tubes or vials not included)..
- Great for storage, transport and organization.
- Each holder has 8 assorted holes and a convenient extra slot!.
- Made from lightweight yet durable high density waterproof, non-scratching, anti-rattle, black foam material. Note: Avoid halogens, strong oxidizing agents, benzene, petroleum ether, aromatic and chlorinated hydrocarbons..
- Easy to clean (can be washed and rinsed, top rack dishwasher safe). Measures approximately 4" x 4" x 2"..
Check StockTaylor Freezers 38061-BLK Taylor Freezers 38061-BLK 358 Probe(New#X82397-SER (38061-BLK)
- Dimension: 134x134x76mm, 81 Holes, suitable for cryotubes of 3’’.
- Material: Made of heavy-duty cardboard material, strong and stable..
- Color: 6 colors, White Blue Red Yellow Orange Green, easy to identify..
- Working temperature: The suitable working temperature range is -80℃ to 121℃..
- Application: Designed for the long term storage of cryogenic vials and centrifuge tubes in freezer rack system..
Check Stock10PK Cork Stoppers, Size #11-21mm Bottom, 27mm Top, 31mm Length - Tapered Shape, Natural Bark Material - Great for Household & Laboratory Use - Eisco Labs
- CORK STOPPERS || Pack of ten, premium quality cork stoppers.
- SIZE #11 || Each stopper measures 31mm in length, has a base diameter measuring 21mm, and a top diameter measuring 27mm. Ideal for bottles, flasks and tubes with a mouth/opening measuring 22-26mm in diameter.
- VERSATILE || Useful for scientific applications, including sealing bottles, flasks and test tubes. Great for household use - for homebrewing, sealing opened wine or beer bottles, spice rack vials, creative projects, DIY corkboards and mats, fishing and more.
- DURABLE || Corks are made of durable, natural bark material. The reliable construction will not crumble or break easily.
- DESIGNED FOR PROFESSIONAL LABORATORIES || Designed for use in professional laboratories, but are suitable for use in the classroom, home or garage.
Check Stock