Top Bearing Pullers

Two Jaw Pilot Bearing Gear Puller, Carbon Steel Adjustable Bearing Puller for Slide Gears, Pulley, and Flywheel(4inch)

  • [Adjustable]: The puller can be bilateral rotation, enable stretching size and working space.Two jaw with adjustable clamping depth, fit for different size gears and bearings.
  • [Widely Application]: These two jaw gear pullers are ideal for automotive flywheel, motorcycle wheel, bicycle wheel, pump bearing generator bearing, machine bearing etc.
  • [Easy to Use]: This bearing puller comes with hexagonal screw and thread for fastening, non-slip and high strength.Adjust screw design, flexible and convenient to repaired different size gears and bearing.
  • [Carbon Steel Material]: These two claws puller is made of carbon steel, the point of the mandrill through a special heat treatment process, more solid and durable.
  • [Service Guaranteed]: If for any reason you are not completely satisfied with any of our products, just contact us directly so we can help with whatever is needed for you.
Check Stock

3-Jaw Gear Puller Set, 3' 4' 6' Gear Removal Tool Kit for Slide Gears, Bearings, Pulleys and Flywheels

  • Ideal removal tool for slide gears, pulleys, bearings and flywheels off of a shaft without damage to your application..
  • The 3-jaw gear pullers are made of forged and hardened steel with strength and longevity, which is durable and has a good bearing capacity..
  • The 3 inch/4 inch gear puller has 3 positions and the 6-inch gear puller has 6 positions. Steel drive screw is cold-rolled and acme-threaded to provide smoother performance..
  • The package contains three sizes 3-jaw gear pullers of 3 inch, 4 inch and 6 inch to meet your various requirements according to different needs..
  • If you have any questions or concerns, please feel free to contact us. It is our policy to render the best service to our customers..
Check Stock

ATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set

  • Extra Durable: The ATPEAM slide hammer puller set is made of drop forged steel pullers and fully hardened shaft and accessories, this will pull the hardest wheel bearing and wheel hub out of the tight position, and make sure this tool set a longer lifespan..
  • A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case..
  • Auto Body Repair Tool Set: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents.
  • slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end.
  • this hammer tool slide kit includes 2 jaws and 3 jaw internal and external pullers, rear axle bearing puller tool, locking plier adaptor, puller hook, and auto dent puller tool.
  • Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is idea....
Check Stock

BokWin 7.3\/185mm Adjustable Two Jaw Gear Puller, Bearing Gear Remover Tool, Motorcycle Car Auto Removal Tool Kit for Gears, Pulley and Flywheel (Carbon Steel Material)

  • 【High Quality】: Two Jaw Pilot Bearing Gear Pullers made of carbon steel, the point of the mandrill through a special heat treatment process, more solid and durable. Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress..
  • 【Special Design】 The puller can be bilateral rotation, enable stretching size and working space.Two jaw with adjustable clamping depth, fit for different size gears and bearings. It can remove gears, pulleys and flywheels off a shaft in hard-to-reach spots without damage your application..
  • 【Widely Application】: 2-Jaw Gear Pullers widely use in various bearings that are not easy to disassemble. Perfectly fit for automotive flywheel, motorcycle wheel, car wheel, scooter motorcycle bearing and gear and so on..
  • Claw Size: 160 x 130mm/ 6.3" x 5.12"(L*W)..
  • 【What You Get】: 1x Two Jaw Gear Puller.
  • 【Quality After-sale Service】: Satisfying customers is BokWin's top priority. If you do not 100% satisfied with our products or if you have any questions, you can contact us anytime. BokWin would solve all the problems to your satisfaction. FREE REPLACEMENT or REFUND within 90days..
Check Stock

VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

  • EASY TO USE: Slide flat end of puller through center of bearing and flat against backside of bearing, then slide washer down the center of the shaft against front side of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out.
  • The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage.
  • Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle.
  • These tools make the job simple and prevent damage to your bearings when pulling.
  • Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings.
  • For removal only, not intended for installation.
  • FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models.
  • Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches.
  • Sizes permanently laser-etched on tool for easy identification.
  • Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch.
Check Stock

8MILELAKE 14PCS Bearing Separator Puller Set Heavy Duty 5-Ton Capacity 2inches and 3inches Splitters Remove Bearings Kit

  • 2 inches and 3 inches bearing separators.
  • Separator tools are used with bar puller and legs for a wide variety of pulling jobs..
  • The 5inches puller cross-bar with a 6-1/4inches forcing screw or each of the bearing separators may also be used separately or in combination with other pullers or tools.
Check Stock

Wheel Bearing Puller Tool Kit Compatible with Harley Davidson Motorcycles | Wheel Bearing Remover Installer Tool Set for 0.75 1 25mm Bearings Compatible with Hogs from 2000 11 Pcs

  • Compatible with Recent Harleys: This OMT wheel bearing puller tool kit is compatible with most Harley-Davidson motorcycles from 2000 to 2020,....
  • Inclusive Set: Aside from your wrench, this wheel bearing kit provides everything you need—pullers, bolts, plates, & dowels—to service your....
  • Quick & Easy Operation: This tool set installs and removes your hog's 0.75-inch, 1-inch, or 25-millimeter sealed wheel bearings without damage,....
  • Built to Last: Made of premium 45# stainless steel, this bearing installer and puller set provides strong and dependable long-term service.
  • Convenient Case: This bearing puller set comes with a blow-molded case, organizing the parts and keeping them easy to carry, store, and maintain.
Check Stock

GEARWRENCH 3 Pc. Rear Axle Bearing Puller Set - 41710

  • Rear-axle bearing puller set for use with most domestic cars.
  • Includes 3 pullers for greater versatility.
  • Packaged in durable, blow-molded case with easy-to-use instructions.
Check Stock

SKF TMMA 75H EasyPull Hydraulic Puller, 3 Jaws, 84 Ton Capacity

  • Ready-to-use, integrated hydraulic cylinder, pump and puller.
  • Safety valve prevents spindles and pullers from being overloaded if excessive force is applied.
  • Spring-loaded center point on the hydraulic spindle allows easy centering of the puller on the shaft.
  • Supplied with extension pieces and one nosepiece.
  • Quick and virtually effortless bearing dismounting.
Check Stock

DAYUAN 12pcs Bearing Separator Puller Set, Heavy Duty 5 Ton Capacity 2\ and 3\ Bearings Splitters Puller Kit

  • Practical: Use the Bearing Separator Set, 5-Ton Capacity – Bar-Type Bearing Splitter, Gear Puller, Fly Wheel Separator 12-Piece Kit when you need to separate bearings on your vehicle, ATV, snowmobile, and more.
  • Versatile: For a wide variety of pulling jobs.
  • Can remove bearings from a shaft, split bearings, and separate flywheels.
  • Can be used separately or with other pullers or tools.
  • Durable: Each piece in this set is drop forged and heat treated for extra strength and longevity.
  • Black oxide finish for corrosion resistance.
  • Easy Storage: Heavy-duty 15” x 9.7” x 2” (38cm x 24.6cm x 5cm) blow-mold case with handle and latches for secure storage, easy transportation, and organization.
  • Contents: 12-piece package includes 4-piece 4” (10cm) and 4-piece 5” (12.7cm) hex push-puller legs, 1-piece 2” (5cm) and 1-piece 3” (7.6cm) bearing separator jaws or splitters, 1-piece 5” (12.7) puller cross bar with 1-piece 6-1/4” (15.9cm) forcing screw.
Check Stock

DURATECH 3-Piece 3-Jaw Gear Puller, 3\

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free....
Check Stock

ABN Bearing Separator Set, 5-Ton Capacity – Bar-Type Bearing Splitter, Gear Puller, Fly Wheel Separator 12-Piece Kit

  • Practical: Use the ABN Bearing Separator Set, 5-Ton Capacity – Bar-Type Bearing Splitter, Gear Puller, Fly Wheel Separator 12-Piece Kit when you need to separate bearings on your vehicle, ATV, snowmobile, and more.
  • Versatile: For a wide variety of pulling jobs.
  • Can remove bearings from a shaft, split bearings, and separate flywheels.
  • Can be used separately or with other pullers or tools.
  • Durable: Each piece in this set is drop forged and heat treated for extra strength and longevity.
  • Black oxide finish for corrosion resistance.
  • Easy Storage: Heavy-duty 15” x 9.7” x 2” (38cm x 24.6cm x 5cm) blow-mold case with handle and latches for secure storage, easy transportation, and organization.
  • Contents: 12-piece package includes 4-piece 4” (10cm) and 4-piece 5” (12.7cm) hex push-puller legs, 1-piece 2” (5cm) and 1-piece 3” (7.6cm) bearing separator jaws or splitters, 1-piece 5” (12.7) puller cross bar with 1-piece 6-1/4” (15.9cm) forcing screw.
Check Stock